ആമുഖം
Welcome to the user manual for your Nerf MicroShots Star Wars Han Solo Blaster. This compact blaster is part of the collectible MicroShots series, designed for quick, single-shot action. Please read this manual carefully to ensure safe and proper use of your blaster.

Figure 1: Nerf MicroShots Star Wars Han Solo Blaster in original packaging.
പാക്കേജ് ഉള്ളടക്കം
പാക്കേജ് തുറക്കുമ്പോൾ, എല്ലാ ഘടകങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക:
- 1 x Nerf MicroShots Star Wars Han Solo Blaster
- 2 x Nerf Elite Darts

Figure 2: The Nerf MicroShots Star Wars Han Solo Blaster.

Figure 3: A single Nerf Elite dart.
സജ്ജമാക്കുക
ഡാർട്ടുകൾ ലോഡുചെയ്യുന്നു
- Locate the dart loading port at the front of the blaster barrel.
- Insert one Nerf Elite dart into the barrel until it is fully seated.
പ്രധാനപ്പെട്ടത്: Use only official Nerf Elite darts. Other darts may not meet safety standards and could cause damage to the blaster or injury.
പ്രവർത്തന നിർദ്ദേശങ്ങൾ
Firing the Blaster
- Load one dart into the barrel as described in the "Setup" section.
- Pull back the priming handle located at the bottom of the blaster grip until it clicks into place. This primes the blaster.
- Aim at your target.
- Press the trigger to fire the dart.
സുരക്ഷാ മുന്നറിയിപ്പ്: Do not aim at eyes or face. Always use eye protection when playing with Nerf blasters. Do not modify darts or the blaster.

Figure 4: Diagram showing dart loading and priming mechanism (refer to packaging for visual aid).
മെയിൻ്റനൻസ്
വൃത്തിയാക്കൽ
To clean your blaster, wipe it with a soft, dry cloth. Do not use water or cleaning solutions, as this may damage the internal mechanisms.
സംഭരണം
Store the blaster and darts in a cool, dry place away from direct sunlight and extreme temperatures. Keep out of reach of small children when not in use.
ട്രബിൾഷൂട്ടിംഗ്
- Dart not firing or firing weakly:
- Ensure the dart is fully inserted into the barrel.
- Make sure the priming handle is pulled back completely until it clicks.
- Check if the dart is damaged or worn; replace with a new, official Nerf Elite dart if necessary.
- Blaster mechanism jammed:
- Do not force the mechanism.
- Remove any darts from the barrel.
- Gently try to reset the priming handle. If the issue persists, contact customer support.
സ്പെസിഫിക്കേഷനുകൾ
| ഉൽപ്പന്നത്തിൻ്റെ പേര് | Nerf MicroShots Star Wars Han Solo Blaster |
| മോഡൽ നമ്പർ | E2031 |
| ഉൽപ്പന്ന അളവുകൾ | 1.73 x 6.73 x 7.01 ഇഞ്ച് |
| ഇനത്തിൻ്റെ ഭാരം | 6.7 ഔൺസ് |
| ശുപാർശ ചെയ്യുന്ന പ്രായം | 8 വർഷവും അതിൽ കൂടുതലും |
| നിർമ്മാതാവ് | ഹസ്ബ്രോ |
| റിലീസ് തീയതി | ഓഗസ്റ്റ് 1, 2018 |

Figure 5: Size comparison of the blaster.
വാറൻ്റിയും പിന്തുണയും
Specific warranty information is not provided within this manual. For details regarding warranty coverage, product support, or to purchase replacement parts, please visit the official Hasbro or Nerf webസൈറ്റ്, അല്ലെങ്കിൽ അവരുടെ ഉപഭോക്തൃ സേവനവുമായി നേരിട്ട് ബന്ധപ്പെടുക.
You can often find support information on the manufacturer's webസൈറ്റ്: www.hasbro.com





