MTX ഡിജിറ്റൽ കാലിപ്പർ 6 IN (150mm) ഉപയോക്തൃ മാനുവൽ

1. ആമുഖം

Thank you for choosing the MTX Digital Caliper. This precision measuring instrument is designed for accurate internal, external, depth, and step measurements. Constructed from durable stainless steel, it features an easy-to-read LCD display for clear measurement readings. This manual provides essential information for the safe and effective use, maintenance, and troubleshooting of your digital caliper.

ചിത്രം 1.1: മൊത്തത്തിൽ view of the MTX Digital Caliper, showing the main body, jaws, LCD display, and control buttons.

2 സുരക്ഷാ വിവരങ്ങൾ

Please read and understand all safety instructions before operating the digital caliper. Failure to follow these instructions may result in injury or damage to the tool.

• Always handle the caliper with care to avoid dropping or impacting it, which can affect its accuracy.
• Keep the caliper clean and free from dust, dirt, and moisture.
• Do not apply excessive force when taking measurements.
• Store the caliper in its protective case when not in use to prevent damage.
• ബാറ്ററികൾ കുട്ടികൾക്ക് ലഭ്യമാകാതെ സൂക്ഷിക്കുക. ഉപയോഗിച്ച ബാറ്ററികൾ ഉത്തരവാദിത്തത്തോടെ നിർമാർജനം ചെയ്യുക.

3. ഉൽപ്പന്നം കഴിഞ്ഞുview

Familiarize yourself with the components of your digital caliper:

1. External Measuring Jaws: Used for measuring external dimensions.
2. Internal Measuring Jaws: Used for measuring internal dimensions.
3. Depth Measuring Blade: Used for measuring depths.
4. Step Measuring Face: Used for measuring step dimensions.
5. Main Scale (Beam): The fixed part of the caliper with the main measurement scale.
6. Movable Jaw: Slides along the main scale.
7. LCD ഡിസ്പ്ലേ: Shows digital measurement readings.
8. ഓൺ/ഓഫ് ബട്ടൺ: യൂണിറ്റ് ഓണാക്കുകയോ ഓഫാക്കുകയോ ചെയ്യുന്നു.
9. ZERO ബട്ടൺ: Sets the display to zero at any position.
10. mm/inch Button: Switches between millimeter and inch units.
11. Thumb Roller: For fine adjustment of the movable jaw.
12. ലോക്കിംഗ് സ്ക്രൂ: Secures the movable jaw in position.

ചിത്രം 3.1: ആംഗിൾഡ് view highlighting the LCD display, control buttons, and measuring jaws.

4. സജ്ജീകരണം

4.1. ബാറ്ററി ഇൻസ്റ്റാളേഷൻ

The digital caliper is powered by a button cell battery (typically SR44/LR44 1.5V). Batteries are not included with the product.

1. Locate the battery compartment cover on the back of the display unit.
2. കവർ തുറക്കുക.
3. Insert a new 1.5V button cell battery with the positive (+) side facing up.
4. ബാറ്ററി കമ്പാർട്ട്മെൻ്റ് കവർ സുരക്ഷിതമായി അടയ്ക്കുക.

4.2. Initial Power On and Zeroing

1. അമർത്തുക ഓൺ/ഓഫ് button to turn on the caliper.
2. Gently close the external measuring jaws completely.
3. അമർത്തുക ZERO button. The display should now read 0.00 mm or 0.000 in.
4. അമർത്തുക മില്ലിമീറ്റർ/ഇഞ്ച് button to select your desired unit of measurement.

Your caliper is now ready for use.

5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Ensure the caliper is clean and zeroed before taking any measurements.

5.1. External Measurement

1. Open the external measuring jaws wider than the object to be measured.
2. Place the object between the jaws.
3. Gently close the jaws until they make firm contact with the object. Use the thumb roller for fine adjustment.
4. Read the measurement directly from the LCD display.
5. For consistent readings, apply light, even pressure.

Image 5.1: Measuring the external diameter of a component.

Image 5.2: Measuring the external dimension of a square tube.

5.2. Internal Measurement

1. Insert the internal measuring jaws into the opening to be measured.
2. Open the jaws until they make firm contact with the inner walls of the opening.
3. Read the measurement from the LCD display.

Image 5.3: Measuring the internal dimension of a square tube.

5.3. ആഴം അളക്കൽ

1. Place the end of the main scale firmly on the top surface of the object.
2. Extend the depth measuring blade into the hole or recess until its end touches the bottom.
3. Read the measurement from the LCD display.

5.4. Step Measurement

1. Place the step measuring face on the higher surface of the step.
2. Slide the movable jaw until the end of the main scale rests on the lower surface of the step.
3. Read the measurement from the LCD display.

6. പരിപാലനം

• വൃത്തിയാക്കൽ: Wipe the caliper clean with a soft, dry cloth after each use. Avoid using solvents or harsh chemicals.
• സംഭരണം: Store the caliper in its original protective case in a dry, clean environment when not in use.
• ബാറ്ററി മാറ്റിസ്ഥാപിക്കൽ: If the display becomes dim or erratic, replace the battery.
• കാലിബ്രേഷൻ: Periodically check the zero point. If the caliper does not zero correctly, clean the measuring faces and try again. If issues persist, professional calibration may be required.

7. പ്രശ്‌നപരിഹാരം

8 സ്പെസിഫിക്കേഷനുകൾ

Image 8.1: Back of the caliper featuring useful measurement conversion charts.

9. വാറൻ്റിയും പിന്തുണയും

For warranty information or technical support, please refer to the documentation provided with your purchase or contact MTX customer service through their official webസൈറ്റ്. വാങ്ങിയതിന്റെ തെളിവായി നിങ്ങളുടെ വാങ്ങൽ രസീത് സൂക്ഷിക്കുക.

Manufacturer: Mundo das Ferramentas do Brasil Ltda.