Skytech 9800332 TS/R-2 Wireless Wall Mounted LCD Fireplace Remote Control Thermostat

ആമുഖം

The Skytech 9800332 TS/R-2 system is designed to provide a safe, reliable, and user-friendly remote control solution for gas heating appliances. This manual will guide you through the installation, operation, and maintenance of your new wireless thermostat system.

പ്രധാനപ്പെട്ട സുരക്ഷാ വിവരങ്ങൾ

Please read and understand all instructions before installing or operating this product. Failure to follow these instructions may result in property damage, personal injury, or death. Keep this manual for future reference.

• Ensure all wiring is performed by a qualified professional if you are unsure.
• Always turn off the gas supply to the appliance before performing any installation or maintenance.
• Do not expose the remote control or receiver to water or extreme temperatures.
• Replace batteries regularly to ensure proper operation and prevent leakage.
• This system is intended for use with gas heating appliances only.

പാക്കേജ് ഉള്ളടക്കം

നിങ്ങളുടെ പാക്കേജിൽ എല്ലാ ഇനങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക:

• Transmitter (Remote Control)
• റിസീവർ ബോക്സ്
• വാൾ ക്ലിപ്പ്
• വാൾ പ്ലേറ്റ്
• ഇൻസ്റ്റലേഷൻ നിർദ്ദേശങ്ങൾ
• Batteries (for transmitter and receiver)
• Temperature Sensor (integrated into the transmitter)

ഉൽപ്പന്നം കഴിഞ്ഞുview

The Skytech 9800332 TS/R-2 is a wireless, wall-mounted thermostat system designed for convenient control of your fireplace. It features a clear LCD display and simple three-button operation.

ചിത്രം 1: Skytech 9800332 TS/R-2 Wireless Thermostat. The unit features an LCD screen displaying '72°F' and 'ROOM SET TEMP', with 'SKYTECH' branding below. At the bottom are three buttons: an 'ON' arrow button, a 'SET' button, and an 'OFF' arrow button.

പ്രധാന സവിശേഷതകൾ:

• 3-Button On/Set/Off wall mounted thermostat with LCD display
• LCD displays room and thermostat set temperature in °F or °C
• Battery powered receiver box with learn function and On/Remote/Off slider switch
• Receiver can be installed in wall, on the hearth or under the fireplace behind the control access panel
• Lighted display for easy viewing
• കുറഞ്ഞ ബാറ്ററി സൂചകം

സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

1. ബാറ്ററി ഇൻസ്റ്റാളേഷൻ

Install the provided batteries into both the transmitter (remote control) and the receiver box. Ensure correct polarity.

2. റിസീവർ പ്ലേസ്മെന്റ്

The receiver box can be installed in various locations:

• Inside the wall (using the wall plate)
• On the hearth
• Under the fireplace, behind the control access panel

Ensure the receiver is placed in a location where it can receive signals from the transmitter and is not exposed to excessive heat.

3. റിസീവർ വയറിംഗ്

Connect the receiver to your gas heating appliance's control valve according to the appliance manufacturer's instructions. Typically, this involves connecting two low-voltage wires from the receiver to the appliance's millivolt or 24V control terminals. Consult a qualified technician if you are unsure about wiring.

4. Pairing (Learn Function)

To establish communication between the transmitter and receiver:

1. Locate the "LEARN" button on the receiver box.
2. Press and hold the "LEARN" button until you hear a beep or see an indicator light flash.
3. Within 20 seconds, press any button on the transmitter.
4. The receiver will beep or flash again to confirm successful pairing.

Test the connection by pressing the ON/OFF buttons on the transmitter.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

1. പവർ ഓൺ/ഓഫ്

• To turn the fireplace ON, press the ON (Up Arrow) ട്രാൻസ്മിറ്ററിലെ ബട്ടൺ.
• To turn the fireplace OFF, press the OFF (Down Arrow) ട്രാൻസ്മിറ്ററിലെ ബട്ടൺ.

2. താപനില ക്രമീകരണം

The LCD displays both the current room temperature and the set temperature.

1. അമർത്തുക സെറ്റ് button once. The set temperature will flash.
2. ഉപയോഗിക്കുക ON (Up Arrow) or OFF (Down Arrow) ആവശ്യമുള്ള താപനില ക്രമീകരിക്കാൻ ബട്ടണുകൾ.
3. അമർത്തുക സെറ്റ് again to confirm, or wait a few seconds for the setting to automatically save.

3. Switching Between °F and °C

താപനില ഡിസ്പ്ലേ യൂണിറ്റ് മാറ്റാൻ:

• With the display showing the room temperature, press and hold the സെറ്റ് button for approximately 5 seconds until the unit changes.

4. Receiver Slider Switch

The receiver box has a slider switch with three positions:

• ഓൺ: Manually turns the fireplace ON, bypassing the remote control.
• നീക്കംചെയ്യുക: Allows the fireplace to be controlled by the wireless transmitter. This is the standard operating position.
• ഓഫാണ്: Manually turns the fireplace OFF, bypassing the remote control.

മെയിൻ്റനൻസ്

ബാറ്ററി മാറ്റിസ്ഥാപിക്കൽ

When the low battery indicator appears on the LCD, or if the system becomes unresponsive, replace the batteries in both the transmitter and receiver. Use fresh alkaline batteries of the specified type (refer to specifications). Dispose of old batteries responsibly.

വൃത്തിയാക്കൽ

Wipe the surfaces of the transmitter and receiver with a soft, dry cloth. Do not use abrasive cleaners or immerse the units in water.

ട്രബിൾഷൂട്ടിംഗ്

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റിയും പിന്തുണയും

For warranty information and technical support, please refer to the documentation included with your purchase or contact SkyTech customer service directly. Keep your proof of purchase for warranty claims.

നിർമ്മാതാവ്: സ്കൈടെക്