ആമുഖം
Thank you for choosing the La-Z-Boy 48968 2000 Big and Tall Executive Chair. This manual provides essential information for the proper assembly, operation, and maintenance of your new chair. Please read these instructions carefully before use to ensure safety and optimal performance.
സുരക്ഷാ വിവരങ്ങൾ
മുന്നറിയിപ്പ്:
- Exceeding the maximum weight capacity of 400 lbs may cause damage to the chair or result in personal injury.
- Ensure all components are properly assembled and tightened before use to maintain stability.
- Individuals sensitive to memory foam materials should be aware that the seat cushion contains gel memory foam.
- ക്രമീകരിക്കുമ്പോൾ കൈകളും വിരലുകളും ചലിക്കുന്ന ഭാഗങ്ങളിൽ നിന്ന് അകറ്റി നിർത്തുക.
ബോക്സിൽ എന്താണുള്ളത്
അസംബ്ലി ആരംഭിക്കുന്നതിന് മുമ്പ് എല്ലാ ഘടകങ്ങളും നിലവിലുണ്ടെന്ന് ദയവായി പരിശോധിക്കുക.
- ചെയർ ബാക്ക്
- ചെയർ സീറ്റ്
- ആംറെസ്റ്റുകൾ (2)
- പഞ്ചനക്ഷത്ര ബേസ്
- കാസ്റ്റേഴ്സ് (5)
- ഗ്യാസ് ലിഫ്റ്റ് സിലിണ്ടർ
- Mechanism/Seat Plate
- Hardware Pack (bolts, washers, Allen wrench)
സജ്ജീകരണവും അസംബ്ലിയും
Follow these steps to assemble your La-Z-Boy Executive Chair. It is recommended to assemble the chair on a soft, non-abrasive surface to prevent damage.
- കാസ്റ്ററുകൾ ബേസിലേക്ക് ഘടിപ്പിക്കുക: Insert each caster into the holes at the end of each leg of the five-star base. Push firmly until they click into place.
- ഗ്യാസ് ലിഫ്റ്റ് ചേർക്കുക: ഗ്യാസ് ലിഫ്റ്റ് സിലിണ്ടർ ഫൈവ്-സ്റ്റാർ ബേസിന്റെ മധ്യഭാഗത്തെ ദ്വാരത്തിൽ വയ്ക്കുക.
- സീറ്റിൽ മെക്കാനിസം ഘടിപ്പിക്കുക: Align the mechanism/seat plate with the pre-drilled holes on the underside of the chair seat. Ensure the front of the mechanism faces the front of the seat. Secure with bolts and washers using the provided Allen wrench.
- ആംറെസ്റ്റുകൾ അറ്റാച്ചുചെയ്യുക: Attach the armrests to the chair seat and back using the appropriate bolts. Do not fully tighten until both arms are in place and aligned.
- ഗ്യാസ് ലിഫ്റ്റിൽ സീറ്റ് ഘടിപ്പിക്കുക: Carefully place the assembled seat onto the gas lift cylinder, ensuring it is centered.
- അന്തിമ മുറുക്കൽ: Once all components are loosely assembled and aligned, fully tighten all bolts.

Image: Fully assembled La-Z-Boy 48968 Executive Chair, showcasing its black bonded leather upholstery, chrome arms, and five-star base with casters.
പ്രവർത്തന നിർദ്ദേശങ്ങൾ
Your La-Z-Boy Executive Chair offers several adjustment features for personalized comfort.
- സീറ്റ് ഉയരം ക്രമീകരിക്കൽ: To raise the seat, lift the lever on the right side of the chair while taking your weight off the seat. To lower the seat, lift the lever while seated. Release the lever at the desired height.
- Knee Tilt and Lock: The chair features a knee tilt seat plate with four-point locking tilt positions. Pull the lever on the left side outwards to allow the chair to tilt. Push the lever inwards to lock the chair in an upright or tilted position.
- ടിൽറ്റ് ടെൻഷൻ ക്രമീകരണം: The round knob located under the front of the seat controls the tilt tension. Turn clockwise to increase tension (making it harder to recline) or counter-clockwise to decrease tension (making it easier to recline).
- Seat Slider: The seat slider allows you to adjust the depth of the seat. Locate the lever or button under the seat (typically on the left side). Engage the lever, slide the seat forward or backward to your preferred depth, and then release the lever to lock it in place.
മെയിൻ്റനൻസ്
ശരിയായ പരിചരണം നിങ്ങളുടെ കസേരയുടെ ആയുസ്സും രൂപവും വർദ്ധിപ്പിക്കും.
- വൃത്തിയാക്കൽ: Spot clean the bonded leather upholstery as needed. Use a soft, damp നേരിയ സോപ്പും വെള്ളവും ഉള്ള തുണി ഉപയോഗിക്കുക. കഠിനമായ രാസവസ്തുക്കളോ ഉരച്ചിലുകളുള്ള ക്ലീനറുകളോ ഒഴിവാക്കുക.
- ഹാർഡ്വെയർ പരിശോധന: എല്ലാ ബോൾട്ടുകളും സ്ക്രൂകളും ഇറുകിയതാണെന്ന് ഉറപ്പാക്കാൻ ഇടയ്ക്കിടെ പരിശോധിക്കുക. സ്ഥിരത നിലനിർത്താൻ ആവശ്യമെങ്കിൽ വീണ്ടും മുറുക്കുക.
- കാസ്റ്റർ കെയർ: Keep casters free of debris (hair, dust) to ensure smooth movement. Clean with a damp തുണി.
ട്രബിൾഷൂട്ടിംഗ്
നിങ്ങളുടെ കസേരയിൽ പ്രശ്നങ്ങൾ നേരിടുകയാണെങ്കിൽ, ഇനിപ്പറയുന്ന പൊതുവായ പരിഹാരങ്ങൾ പരിശോധിക്കുക:
- കസേര മുങ്ങുകയോ എഴുന്നേൽക്കാതിരിക്കുകയോ ചെയ്യുക: The gas lift cylinder may be faulty. Contact customer support for a replacement.
- കസേര ആടിയുലയുന്നു: Ensure all assembly bolts are securely tightened. Check that the casters are fully inserted into the base.
- Difficulty Tilting or Locking: Check the tilt tension knob and the tilt lock lever. Adjust tension or ensure the lever is fully engaged/disengaged.
- സുഗമമായി ഉരുളാത്ത കാസ്റ്ററുകൾ: Clean any debris from the caster wheels. If still an issue, casters may need replacement.
സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| ബ്രാൻഡ് | ലാ-സെഡ്-ബോയ് |
| മോഡലിൻ്റെ പേര് | La Z Boy 48968 |
| ഉൽപ്പന്ന അളവുകൾ | 27.75"D x 36.75"W x 18.75"H |
| പരമാവധി ഭാരം ശുപാർശ | 400 പൗണ്ട് |
| മെറ്റീരിയൽ തരം | Bonded Leather (Upholstery), Cotton (Fill) |
| മെറ്റീരിയൽ പൂരിപ്പിക്കുക | മെമ്മറി നുര |
| നിറം | കറുപ്പ് |
| ബാക്ക് സ്റ്റൈൽ | സോളിഡ് ബാക്ക് |
| ആം ശൈലി | With arms (Aluminum with PU arm pads) |
| ഫർണിച്ചർ ബേസ് മൂവ്മെൻ്റ് | സ്വിവൽ |
| ടിൽറ്റിംഗ് | Yes (Knee tilt with 4-point lock) |
| ഉൽപ്പന്ന പരിപാലന നിർദ്ദേശങ്ങൾ | സ്പോട്ട് ക്ലീൻ |
| ഇനത്തിൻ്റെ ഭാരം | 69 പൗണ്ട് |
| യു.പി.സി | 656292489681 |

Image: Diagram showing the dimensions of the La-Z-Boy 48968 Executive Chair: 36.75 inches high, 27.75 inches deep, and 18.75 inches wide.

Image: Cross-section diagram illustrating the ComfortCore with Gel Memory Foam construction, detailing layers such as breathable perforated leather, polyfiber-fill, gel memory foam, and firmer support at the back of the cushion.
വാറൻ്റിയും പിന്തുണയും
For warranty information or technical support, please refer to the documentation included with your purchase or visit the official La-Z-Boy webസൈറ്റ്. വാറന്റി ക്ലെയിമുകൾക്കായി നിങ്ങളുടെ വാങ്ങലിന്റെ തെളിവ് സൂക്ഷിക്കുക.
നിർമ്മാതാവ്: LA-Z-BOY CHAIR COMPANY





