1. ആമുഖവും സുരക്ഷാ വിവരങ്ങളും
Thank you for choosing the Superfish Smart Heater. This professional aquarium heater with integrated thermometer is designed to provide precise and reliable temperature control for your aquarium. Please read this manual carefully before installation and operation to ensure safe and optimal performance.
പ്രധാനപ്പെട്ട സുരക്ഷാ നിർദ്ദേശങ്ങൾ:
- Always unplug the heater from the power outlet before performing any maintenance, cleaning, or handling the aquarium water.
- This appliance is designed for indoor use only and must be fully submersible.
- Ensure the heater is completely submerged in water before plugging it in. Never operate the heater out of water.
- The heater is constructed with 2mm quartz safety glass and a plastic protective cap for safe use. Handle with care to avoid breakage.
- കോർഡ് അല്ലെങ്കിൽ പ്ലഗ് കേടായെങ്കിൽ ഹീറ്റർ ഉപയോഗിക്കരുത്.
- കുട്ടികൾക്കും വളർത്തുമൃഗങ്ങൾക്കും ലഭ്യമാകാതെ സൂക്ഷിക്കുക.
- Ensure a drip loop is formed with the power cord to prevent water from running down the cord and into the electrical outlet.
Figure 1: Superfish Smart Heater 300W in its retail packaging, showcasing the product and key features.
2. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
Proper installation is crucial for the efficient and safe operation of your Superfish Smart Heater.
ഇൻസ്റ്റലേഷൻ ഘട്ടങ്ങൾ:
- അൺപാക്ക്: ഹീറ്റർ അതിന്റെ പാക്കേജിംഗിൽ നിന്ന് ശ്രദ്ധാപൂർവ്വം നീക്കം ചെയ്യുക. ദൃശ്യമായ എന്തെങ്കിലും കേടുപാടുകൾ ഉണ്ടോ എന്ന് പരിശോധിക്കുക.
- പ്ലേസ്മെൻ്റ്: Position the heater vertically or horizontally within your aquarium, ensuring it is fully submerged. Choose a location with good water circulation to ensure even heat distribution. Avoid placing it directly in the substrate or against the glass where water flow is restricted.
- മൗണ്ടിംഗ്: Use the included suction cups to securely attach the heater to the inside wall of your aquarium.
- പവർ കണക്ഷൻ: Once the heater is securely installed and fully submerged, connect the power plug to a suitable electrical outlet. Ensure your hands are dry when handling the plug.
- പ്രാരംഭ സ്ഥിരത: Allow the heater to acclimate to the aquarium water temperature for at least 15-20 minutes before setting the desired temperature.
3. പ്രവർത്തന നിർദ്ദേശങ്ങൾ
The Superfish Smart Heater features a digital display for easy temperature setting and monitoring.
താപനില ക്രമീകരണം:
- Upon plugging in, the digital display will show the current water temperature in your aquarium.
- To set the desired temperature, press the button located on the top of the heater. Each press will cycle through the available temperature settings (17°C to 34°C).
- Once you reach your desired temperature, stop pressing the button. The display will flash a few times to confirm the setting, then revert to showing the current water temperature.
- The heater will automatically begin heating the water if the current temperature is below the set temperature. The display will indicate when heating is active.
- The precise and reliable thermostat will maintain a constant water temperature within the set range.
4. പരിപാലനം
Regular maintenance ensures the longevity and efficiency of your Superfish Smart Heater.
ശുചീകരണവും പരിചരണവും:
- പവർ വിച്ഛേദിക്കുക: Always unplug the heater from the power outlet and allow it to cool down completely before removing it from the aquarium for cleaning.
- Clean Glass Tube: Gently wipe the glass tube with a soft cloth or sponge to remove any algae or mineral deposits. Do not use abrasive cleaners or harsh chemicals.
- പരിശോധിക്കുക: Periodically inspect the power cord for any signs of damage or fraying. Check the suction cups for wear and tear and replace if necessary to ensure secure mounting.
- പുനഃസ്ഥാപിക്കൽ: After cleaning, re-install the heater as per the "Setup and Installation" section, ensuring it is fully submerged before reconnecting power.
5. പ്രശ്നപരിഹാരം
If you encounter issues with your Superfish Smart Heater, refer to the following common problems and solutions:
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| Heater not turning on / Display is off. | No power supply; Heater not fully submerged. | Check power outlet and plug connection. Ensure heater is fully submerged in water. |
| Aquarium temperature is not stable or not reaching desired temperature. | Heater too small for aquarium volume; Poor water circulation; Heater covered by substrate/decorations. | Verify heater wattage matches aquarium volume (refer to specifications). Improve water circulation. Reposition heater for better water flow. |
| Digital display shows an error code or unusual reading. | Sensor malfunction; Internal error. | Unplug the heater, wait 5 minutes, then plug it back in. If the issue persists, contact customer support. |
| Heater is on but water is not heating. | Heating element failure; Incorrect temperature setting. | Ensure desired temperature is set higher than current water temperature. If still no heat, the heating element may be faulty; contact customer support. |
6 സ്പെസിഫിക്കേഷനുകൾ
Detailed technical specifications for the Superfish Smart Heater series.
Figure 2: Technical information table for various Superfish heater models, including Smart Heater series.
| മോഡൽ | ശക്തി | അക്വേറിയം വോളിയം | നീളം | താപനില പരിധി |
|---|---|---|---|---|
| Smart Heater 100W | 100 W | 75 ലിറ്റർ വരെ | 27 സെ.മീ | 17-34 ഡിഗ്രി സെൽഷ്യസ് |
| Smart Heater 200W | 200 W | 125 ലിറ്റർ വരെ | 27 സെ.മീ | |
| Smart Heater 300W | 300 W | 200 ലിറ്റർ വരെ | 27 സെ.മീ | |
| Smart Heater 500W | 500 W | 350 ലിറ്റർ വരെ | 30 സെ.മീ |
കുറിപ്പ്: Recommended power is 1.5 W per liter of aquarium content based on placement in a European environment. In cooler environments, more power per liter of content may be required.
Smart Heater 100W
Smart Heater 200W
Smart Heater 300W
Smart Heater 500W
7. വാറൻ്റിയും പിന്തുണയും
Superfish products are manufactured to high-quality standards. For warranty information or technical support, please refer to the warranty card included with your product or visit the official Superfish webസൈറ്റ്.
ഏതെങ്കിലും വാറന്റി ക്ലെയിമുകൾക്കായി നിങ്ങളുടെ വാങ്ങിയതിന്റെ തെളിവ് സൂക്ഷിക്കുക.
