ആമുഖം
Welcome to the world of miniature crafting with your new ROBOTIME Ada's Studio DIY Miniature House kit. This kit allows you to construct a detailed miniature painter's studio, complete with an easel, paintings, brushes, paints, and art books. This manual provides comprehensive instructions to guide you through the assembly process, operation of features, maintenance, and troubleshooting.
Figure 1: Fully assembled Ada's Studio DIY Miniature House.
സുരക്ഷാ വിവരങ്ങൾ
Please read all safety warnings before beginning assembly. This product contains small parts and is not suitable for children under 36 months due to choking hazards. Adult supervision is recommended for younger users (recommended age 14 years and older).
- Keep all small components out of reach of young children.
- Use glues and paints in a well-ventilated area.
- Handle sharp tools (e.g., scissors, craft knives) with care.
സജ്ജീകരണവും അസംബ്ലിയും
The Ada's Studio kit requires assembly of various miniature components. Follow the steps carefully for best results.
1. അൺപാക്ക് ചെയ്യലും ഘടക തിരിച്ചറിയലും
Carefully unpack all contents from the box. Verify that all sheets of pre-cut parts, fabric pieces, wires, LED components, and accessory bags are present. Refer to the included parts list (if any) to ensure no components are missing.
ചിത്രം 2: ഉദാample of various miniature components included in the kit.
2. അസംബ്ലി ഘട്ടങ്ങൾ
Follow the numbered instructions provided in the kit's dedicated assembly guide. General steps include:
- തയ്യാറാക്കൽ: Carefully detach pre-cut pieces from their sheets. Use fine-grit sandpaper to smooth any rough edges if necessary.
- ഒട്ടിക്കൽ: Apply glue sparingly to the designated tabs or surfaces. Hold pieces together firmly until the glue sets.
- Folding and Cutting: For paper or fabric components, follow the score lines for accurate folds and use sharp scissors or a craft knife for precise cuts.
- Wiring (LEDs): Connect the LED components according to the wiring diagram. Ensure correct polarity if applicable. Secure wires neatly to avoid obstruction.
- വിശദാംശം: Attach small accessories and decorative elements last, ensuring they are securely fastened.
Figure 3: Illustrative assembly steps, including cutting, gluing, and fabric work.
പ്രവർത്തന നിർദ്ദേശങ്ങൾ
The Ada's Studio miniature house features integrated LED lighting to illuminate your completed scene.
എൽഇഡി ലൈറ്റിംഗ് ഓപ്പറേഷൻ
Once assembly is complete and the wiring is connected, the LED lights can be activated. The kit typically includes a battery box (batteries not included) with an on/off switch. Insert the required batteries (e.g., AAA batteries) into the battery box, connect it to the main power line of the LED circuit, and use the switch to turn the lights on or off.
Figure 4: Ada's Studio with LED lights off (left) and on (right).
മെയിൻ്റനൻസ്
To ensure the longevity and appearance of your miniature house, follow these simple maintenance guidelines:
- പൊടിയിടൽ: Regularly dust the miniature house with a soft brush or a can of compressed air to remove accumulated dust. Avoid using wet cloths, which may damage paper or fabric components.
- പ്ലേസ്മെൻ്റ്: Display the model in a dry environment, away from direct sunlight, extreme temperatures, and high humidity, which can cause warping or fading.
- കൈകാര്യം ചെയ്യൽ: Handle the assembled model with care, preferably by its base, to avoid dislodging delicate components.
- ബാറ്ററി മാറ്റിസ്ഥാപിക്കൽ: If the LED lights dim or stop working, replace the batteries in the battery box. Ensure proper battery orientation.
ട്രബിൾഷൂട്ടിംഗ്
If you encounter issues during assembly or operation, refer to the following common problems and solutions:
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| ഭാഗങ്ങൾ പരസ്പരം യോജിക്കുന്നില്ല. | Excess glue, rough edges, incorrect orientation. | Ensure glue is applied thinly. Gently sand edges if needed. Double-check the assembly diagram for correct part orientation. |
| LED വിളക്കുകൾ ഓണാക്കുന്നില്ല. | Incorrect battery installation, dead batteries, loose wire connection, faulty LED. | Check battery polarity and ensure batteries are fresh. Verify all wire connections are secure. Inspect LED for visible damage. |
| ഘടകങ്ങൾ കാണുന്നില്ല. | Parts overlooked during unpacking, manufacturing error. | Carefully re-check all packaging materials. Contact ROBOTIME customer support with your model number and a description of the missing part. |
സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| ഉൽപ്പന്ന അളവുകൾ | 19 x 19 x 14 സെ.മീ (7.5 x 7.5 x 5.5 ഇഞ്ച്) |
| ഭാരം | 270 ഗ്രാം (0.6 പൗണ്ട്) |
| മോഡൽ നമ്പർ | DG103 |
| ശുപാർശ ചെയ്യുന്ന പ്രായം | 14 വയസ്സും അതിൽ കൂടുതലും |
| മെറ്റീരിയലുകൾ | Cardboard, Plastic, Metal, Paper |
| അസംബ്ലി ആവശ്യമാണ് | Yes (DIY Kit) |
| ബാറ്ററികൾ ആവശ്യമാണ് | Yes (for LED lighting, not included) |
വാറൻ്റിയും പിന്തുണയും
For any questions, missing parts, or support regarding your ROBOTIME Ada's Studio DIY Miniature House, please contact the manufacturer or your point of purchase. Keep your proof of purchase and model number (DG103) ready when contacting support.
ROBOTIME products are designed for quality and enjoyment. If you experience any issues, please reach out to their customer service for assistance.
