1. ആമുഖം
Thank you for choosing the Robotime DG102 Sam's Study DIY Miniature House Kit. This kit provides an engaging and creative experience, allowing you to construct a detailed miniature replica of a cozy study. Designed to stimulate creativity, manual dexterity, and patience, this educational toy is composed of safe materials suitable for assembly by individuals aged 3 years and above, with adult supervision recommended for younger users due to small parts.
Image 1.1: Fully assembled Robotime DG102 Sam's Study miniature house.
2 സുരക്ഷാ വിവരങ്ങൾ
- ചെറിയ ഭാഗങ്ങൾ മുന്നറിയിപ്പ്: This kit contains small parts which may pose a choking hazard for children under 3 years of age. Adult supervision is highly recommended during assembly, especially when children are involved.
- മൂർച്ചയുള്ള അഗ്രങ്ങൾ: Some components may have sharp edges or points before assembly. Handle with care to avoid injury.
- പശ ഉപയോഗം: The kit includes adhesive. Use glue in a well-ventilated area. Avoid contact with eyes and skin. In case of contact, rinse thoroughly with water. Keep out of reach of small children.
- ഉപകരണങ്ങൾ: If using additional tools (e.g., scissors, tweezers, craft knife), ensure they are used safely and stored properly.
- നീക്കം ചെയ്യൽ: Dispose of all packaging materials and unused components responsibly.
3. പാക്കേജ് ഉള്ളടക്കം
Before beginning assembly, please verify that all components listed below are present in your kit. Refer to the included instruction booklet for a detailed parts list and diagrams.
ചിത്രം 3.1: കഴിഞ്ഞുview of kit components.
Image 3.2: Contents as packaged within the box.
- Pre-cut wooden sheets for structural components and furniture.
- Printed paper sheets for wallpaper, books, and decorative elements.
- Fabric pieces for upholstery and soft furnishings.
- Small plastic or metal accessories (e.g., miniature frames, lampഎസ്).
- LED lights and wiring (if applicable for lighting features).
- പശ (പശ).
- Paintbrush or applicator.
- ഡയഗ്രമുകളുള്ള വിശദമായ നിർദ്ദേശ ലഘുലേഖ.
4. സജ്ജീകരണവും അസംബ്ലി നിർദ്ദേശങ്ങളും
Assembly of the Robotime DG102 kit requires patience and attention to detail. Follow the step-by-step instructions and diagrams provided in the included booklet carefully. The general assembly process is outlined below:
- തയ്യാറാക്കൽ:
- Unpack all components and organize them by type or step as indicated in the instruction booklet.
- വൃത്തിയുള്ളതും നല്ല വെളിച്ചമുള്ളതുമായ ഒരു ജോലിസ്ഥലം ഉണ്ടെന്ന് ഉറപ്പാക്കുക.
- Gather any additional tools you might need (e.g., small scissors, tweezers, ruler, craft knife).
- അടിസ്ഥാന അസംബ്ലി:
- Assemble the base structure according to the diagrams. This typically involves interlocking wooden pieces.
- Apply wallpaper or flooring elements to the base as instructed.
- Wall and Structure Assembly:
- Construct the walls and main structural elements. Pay close attention to the orientation of each piece.
- Secure components using the provided adhesive. Allow sufficient drying time for each section before proceeding.
- Furniture and Decorative Elements:
- Assemble the miniature furniture pieces (e.g., bookshelves, chairs, tables).
- Cut and apply paper elements like books, pictures, and other decorations.
- Attach small accessories to their designated places.
ചിത്രം 4.1: വിശദമായത് view of assembled furniture and decorations.
- Lighting Installation (if applicable):
- If your kit includes LED lights, carefully follow the wiring diagrams to install them.
- Ensure all connections are secure and hidden as much as possible.
- Test the lights before fully sealing any sections.
- ഫിനിഷിംഗ് ടച്ചുകൾ:
- Add any remaining small details, such as plants, rugs, or final decorative items.
- Ensure all parts are securely glued and the structure is stable.
കുറിപ്പ്: The instruction booklet provided with your kit contains specific, detailed diagrams and step-by-step guidance for each component. Always refer to it for precise assembly.
5. Operating (Display and Handling)
Once assembled, your Robotime DG102 Sam's Study miniature house is ready for display. Treat it as a delicate decorative item.
- പ്ലേസ്മെൻ്റ്: Place the miniature house on a stable, flat surface away from direct sunlight, excessive heat, or humidity to prevent material warping or fading.
- കൈകാര്യം ചെയ്യൽ: Always lift the model from its base. Avoid applying pressure to delicate parts or pulling on small accessories.
- ലൈറ്റിംഗ്: If your model includes LED lights, ensure the battery compartment (if applicable) is easily accessible for battery replacement. Turn off lights when not in use to conserve battery life.
Image 5.1: The assembled miniature house in a display setting.
6. പരിപാലനം
- വൃത്തിയാക്കൽ: Dust the miniature house gently with a soft, dry brush or a microfiber cloth. Avoid using water or chemical cleaners, as they may damage the materials or paint.
- അറ്റകുറ്റപ്പണികൾ: If any small parts detach, reattach them carefully using a suitable craft adhesive.
- സംഭരണം: If storing the model, place it in a sturdy box to protect it from dust and physical damage.
7. പ്രശ്നപരിഹാരം
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| നഷ്ടപ്പെട്ട അല്ലെങ്കിൽ കേടായ ഭാഗങ്ങൾ | പാക്കേജിംഗ് പിശക് അല്ലെങ്കിൽ ഗതാഗത കേടുപാടുകൾ. | Carefully check all packaging. If parts are genuinely missing or damaged, contact Robotime customer support with your purchase details. |
| കഷണങ്ങൾ പരസ്പരം യോജിക്കുന്നില്ല | Incorrect orientation or excess material. | Double-check the instruction diagrams for correct orientation. Gently sand or trim excess material if necessary, but be careful not to remove too much. |
| Glue not holding parts | Insufficient glue, improper application, or not enough drying time. | Apply a thin, even layer of glue. Hold parts firmly in place for a few moments and allow ample drying time before moving. Ensure surfaces are clean. |
| ലൈറ്റുകൾ പ്രവർത്തിക്കുന്നില്ല (ബാധകമെങ്കിൽ) | Incorrect wiring, dead batteries, or faulty LED. | Check battery installation and replace batteries if needed. Verify all wire connections are secure and follow the wiring diagram precisely. |
8 സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| ഉൽപ്പന്ന മോഡൽ | DG102 |
| ഉൽപ്പന്ന അളവുകൾ (അസംബിൾ ചെയ്തത്) | 21.7 x 5.7 x 32.8 സെ.മീ (ഏകദേശം 8.5 x 2.2 x 12.9 ഇഞ്ച്) |
| ഇനത്തിൻ്റെ ഭാരം | 970 ഗ്രാം (ഏകദേശം 2.14 പൗണ്ട്) |
| ശുപാർശ ചെയ്യുന്ന പ്രായം | 3 years and up (adult supervision recommended) |
| പ്രധാന മെറ്റീരിയൽ | Synthetic Wood |
| വിദ്യാഭ്യാസ ലക്ഷ്യങ്ങൾ | Patience training, concentration ability, manual dexterity, creativity |
| അസംബ്ലി ആവശ്യമാണ് | അതെ |
| ബാറ്ററികൾ ആവശ്യമാണ്/ഉൾപ്പെടുത്തിയിരിക്കുന്നു | No (for basic kit, check specific lighting components if included) |
9. വാറൻ്റിയും പിന്തുണയും
ROBOTIME products are manufactured with quality and care. For any questions regarding missing parts, assembly difficulties, or product defects, please contact the retailer where you purchased the kit or visit the official ROBOTIME webഉപഭോക്തൃ പിന്തുണ വിവരങ്ങൾക്കായുള്ള സൈറ്റ്.
ഏതെങ്കിലും വാറന്റി ക്ലെയിമുകൾക്കോ പിന്തുണാ അന്വേഷണങ്ങൾക്കോ വേണ്ടി നിങ്ങളുടെ വാങ്ങിയതിന്റെ തെളിവ് സൂക്ഷിക്കുക.
