സഫയർ SP-2044A-192-ORB ഒക്ട സീരീസ് മോഡേൺ കാബിനറ്റ് ഹാൻഡിൽ ഇൻസ്ട്രക്ഷൻ മാനുവൽ

1. ഉൽപ്പന്നം കഴിഞ്ഞുview

The Sapphire Octa Series Modern Cabinet Handle (Model: SP-2044A-192-ORB) is designed to complement various home storage aesthetics. This handle features a straight, flat-faced design with subtle bevelling and layered handle feet, providing an easy-to-grab and functional accent for cabinetry.

പ്രധാന സവിശേഷതകളിൽ ഇവ ഉൾപ്പെടുന്നു:

• Oil-rubbed Bronze finish.
• Constructed from durable zinc material.
• Part of the Sapphire modern collection.
• Measures 7.56 inches (192mm) in length.
• Projects 0.5 inches from the cabinet surface.

Figure 1: Sapphire SP-2044A-192-ORB Octa Series Modern Cabinet Handle. This image displays the Sapphire Octa Series Modern Cabinet Handle, featuring a straight, flat-faced design with subtle bevelling and layered handle feet. The handle is shown in an oil-rubbed bronze finish.

2. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

This cabinet handle is designed for easy installation. Basic tools are required (not included).

2.1 ഉൾപ്പെടുത്തിയ ഘടകങ്ങൾ

• 1 x Sapphire Octa Series Cabinet Handle
• 2 x മൗണ്ടിംഗ് സ്ക്രൂകൾ

2.2 Recommended Tools (Not Included)

• അളക്കുന്ന ടേപ്പ് അല്ലെങ്കിൽ ഭരണാധികാരി
• പെൻസിൽ
• Drill with appropriate drill bit (typically 3/16" or 5mm for cabinet hardware)
• Screwdriver (Phillips head or flathead, depending on screw type)

2.3 ഇൻസ്റ്റലേഷൻ ഘട്ടങ്ങൾ

1. അളക്കുകയും അടയാളപ്പെടുത്തുകയും ചെയ്യുക: Determine the desired location for the handle on your cabinet door or drawer. Use a measuring tape to mark the two screw hole centers. The handle has a center-to-center measurement of 192mm (7.56 inches).
2. ഡ്രിൽ പൈലറ്റ് ദ്വാരങ്ങൾ: Carefully drill pilot holes through the marked points. Ensure the drill bit size is appropriate for the mounting screws to prevent splitting the wood.
3. ഹാൻഡിൽ അറ്റാച്ചുചെയ്യുക: Align the handle with the drilled holes. Insert the mounting screws from the inside of the cabinet door/drawer through the pilot holes and into the handle posts.
4. സുരക്ഷിതം: Tighten the screws firmly with a screwdriver until the handle is securely attached. Avoid over-tightening, which can strip the screws or damage the cabinet material.

3. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The Sapphire Octa Series Cabinet Handle functions as a pull for opening and closing cabinet doors and drawers. Simply grasp the handle and apply gentle force in the desired direction to operate the cabinet mechanism.

4. പരിപാലനം

To maintain the appearance and functionality of your Sapphire cabinet handle, follow these guidelines:

• വൃത്തിയാക്കൽ: Wipe the handle regularly with a soft, damp cloth. For stubborn marks, use a mild soap solution and immediately dry with a clean, soft cloth.
• കഠിനമായ രാസവസ്തുക്കൾ ഒഴിവാക്കുക: Do not use abrasive cleaners, ammonia-based products, or harsh chemicals, as these can damage the oil-rubbed bronze finish and zinc material.
• സ്ക്രൂകൾ പരിശോധിക്കുക: Periodically check the mounting screws for tightness. If the handle feels loose, gently tighten the screws to ensure secure attachment.

5. പ്രശ്‌നപരിഹാരം

• ഹാൻഡിൽ അയഞ്ഞതായി തോന്നുന്നു:

  പരിഹാരം: Use a screwdriver to gently tighten the mounting screws from the inside of the cabinet door or drawer. Do not overtighten.

• Handle is difficult to install:

  പരിഹാരം: Ensure that the pilot holes are drilled correctly and align with the handle's screw posts. Verify that the drill bit size is appropriate for the screws. If issues persist, consult a professional installer.

6 സ്പെസിഫിക്കേഷനുകൾ

7. വാറൻ്റിയും പിന്തുണയും

Specific warranty information for the Sapphire SP-2044A-192-ORB Octa Series Modern Cabinet Handle is not provided in this manual. For details regarding warranty coverage, returns, or technical support, please contact the retailer where the product was purchased or the manufacturer, Imperial USA, directly.

ഏതെങ്കിലും വാറന്റി ക്ലെയിമുകൾക്കായി നിങ്ങളുടെ വാങ്ങിയതിന്റെ തെളിവ് സൂക്ഷിക്കുക.