MARATHON Slim Atomic Wall Clock with Full Calendar and Indoor/Outdoor Temperature

ആമുഖം

This manual provides comprehensive instructions for the setup, operation, and maintenance of your MARATHON Slim Atomic Wall Clock, Model CL030027-FD-WD. This digital clock features a large, easy-to-read display, full calendar, and monitors both indoor and outdoor temperatures. It utilizes atomic time synchronization for accurate timekeeping.

ഉൽപ്പന്നം കഴിഞ്ഞുview

The MARATHON CL030027-FD-WD is a versatile atomic wall clock designed for clear visibility and accurate information. Key features include:

• Large, Legible Display: 2-inch high digits for time, ensuring easy readability from a distance.
• Atomic Time Synchronization: Automatically sets and adjusts time using radio frequencies from NIST's Colorado Atomic Clock.
• പൂർണ്ണ കലണ്ടർ ഡിസ്പ്ലേ: Shows the day of the week, month, and date.
• Indoor/Outdoor Temperature: Displays temperature in Celsius or Fahrenheit, with an included wireless outdoor sensor.
• ഒന്നിലധികം സമയ മേഖലകൾ: Supports 8 different time zones with an option to manage Daylight Saving Time.
• മൗണ്ടിംഗ് ഓപ്ഷനുകൾ: Can be wall-mounted or displayed on a desktop using its built-in foldable stand.

Image: The MARATHON Slim Atomic Wall Clock displaying time, day, date, and indoor/outdoor temperatures, alongside its wireless outdoor sensor.

പാക്കേജ് ഉള്ളടക്കം

സജ്ജീകരണവുമായി മുന്നോട്ടുപോകുന്നതിനുമുമ്പ് എല്ലാ ഇനങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക:

• MARATHON Slim Atomic Wall Clock (Model CL030027-FD-WD)
• വയർലെസ് ഔട്ട്ഡോർ ടെമ്പറേച്ചർ സെൻസർ
• 4 x AA Batteries (for clock and sensor)
• നിർദ്ദേശ മാനുവൽ (ഈ പ്രമാണം)

സജ്ജീകരണ നിർദ്ദേശങ്ങൾ

1. ബാറ്ററി ഇൻസ്റ്റാളേഷൻ

1. For the Main Clock: Open the battery compartment on the back of the clock. Insert the specified AA batteries, observing the correct polarity (+/-).
2. For the Outdoor Sensor: Open the battery compartment on the back of the wireless sensor. Insert the specified AA batteries, observing the correct polarity (+/-).
3. Close both battery compartments securely.

Note: It is recommended to insert batteries into the outdoor sensor first, then into the main clock, to ensure proper synchronization.

2. Initial Power-Up and Atomic Time Synchronization

Upon battery installation, the clock will automatically begin searching for the atomic time signal (WWVB) and the outdoor sensor signal. This process may take several minutes to several hours, depending on your location and environmental conditions.

• Place the clock near a window for better signal reception during initial setup.
• A signal icon (often resembling a radio tower or waves) will appear on the display when the atomic signal is being received.
• Once synchronized, the time, date, and day will automatically set.

Image: Illustration highlighting the self-setting feature of the clock upon battery insertion.

3. ഔട്ട്ഡോർ സെൻസർ പ്ലേസ്മെന്റ്

For accurate outdoor temperature readings, position the wireless sensor in a sheltered location outside, away from direct sunlight and precipitation. Ensure it is within the transmission range of the main clock (typically up to 100 feet/30 meters, line of sight).

• Avoid placing the sensor near large metal objects or electrical appliances that may interfere with the signal.
• If the outdoor temperature does not display, press the "Sensor" or "Channel" button on the main clock (if available) to re-establish connection, or re-insert batteries in both units.

4 മൗണ്ടിംഗ് ഓപ്ഷനുകൾ

• വാൾ മൗണ്ട്: Use the integrated keyhole slots on the back of the clock to hang it on a screw or nail securely fastened to a wall.
• Desktop Display: Extend the built-in foldable stand on the back of the clock to place it on a flat surface.

Image: The clock highlighting its versatility with both wall-mount and built-in table stand options.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

1. Setting Time Zone

After atomic synchronization, you may need to adjust the time zone. Locate the "TIME ZONE" or "ZONE" button on the back of the clock. Press this button repeatedly to cycle through the available 8 time zones until your local time zone is displayed.

2. 12/24 മണിക്കൂർ ഫോർമാറ്റ് തിരഞ്ഞെടുക്കൽ

To switch between 12-hour (AM/PM) and 24-hour (military) time formats, locate the "12/24H" button on the back of the clock and press it once.

3. Temperature Unit Selection (Celsius/Fahrenheit)

To change the temperature display between Celsius (°C) and Fahrenheit (°F), locate the "°C/°F" button on the back of the clock and press it once.

4. Daylight Saving Time (DST) On/Off

The clock typically adjusts for DST automatically. However, if you reside in an area that does not observe DST, or if you wish to manually override this feature, locate the "DST" button on the back of the clock and press it to toggle the function on or off.

5. Manual Time Setting (If Atomic Sync is Unavailable)

In areas where the atomic signal is weak or unavailable, you can manually set the time and date:

1. Press and hold the "SET" or "MODE" button until the time display begins to flash.
2. Use the "+" or "-" buttons to adjust the flashing digit (e.g., hour, minute).
3. Press "SET" or "MODE" again to confirm the setting and move to the next adjustable parameter (e.g., minute, year, month, day).
4. Repeat until all desired settings are configured, then press "SET" or "MODE" one last time to exit manual setting mode.

വിവരങ്ങൾ പ്രദർശിപ്പിക്കുക

The clock's display is designed to provide all essential information at a glance:

• സമയം: Large digits display the current time (hours, minutes, seconds). AM/PM indicator for 12-hour format.
• ആഴ്ചയിലെ ദിവസം: Full day name (e.g., TUESDAY).
• തീയതി: Month and day (e.g., JUL/30).
• ഇൻഡോർ താപനില: Current temperature measured by the main clock unit.
• ഔട്ട്ഡോർ താപനില: Current temperature received from the wireless outdoor sensor.
• ആറ്റോമിക് സിഗ്നൽ സൂചകം: Icon indicating successful atomic time synchronization.

ചിത്രം: വിശദമായ ഒരു ചിത്രം view of the clock's dynamic display, showing time, day, date, and both indoor and outdoor temperatures.

മെയിൻ്റനൻസ്

• വൃത്തിയാക്കൽ: മൃദുവായതും ഉണങ്ങിയതുമായ തുണി ഉപയോഗിച്ച് ക്ലോക്കും സെൻസറും തുടയ്ക്കുക. അബ്രസീവ് ക്ലീനറുകളോ ലായകങ്ങളോ ഉപയോഗിക്കരുത്.
• ബാറ്ററി മാറ്റിസ്ഥാപിക്കൽ: Replace all batteries in both the main clock and the outdoor sensor when the display becomes dim or unresponsive. Always replace with fresh, high-quality AA alkaline batteries.
• പരിസ്ഥിതി വ്യവസ്ഥകൾ: Avoid exposing the clock to extreme temperatures, direct sunlight for prolonged periods, or high humidity. The outdoor sensor is weather-resistant but should be placed in a sheltered area.

ട്രബിൾഷൂട്ടിംഗ്

സ്പെസിഫിക്കേഷനുകൾ

Image: Diagram illustrating the dimensions of the MARATHON Slim Atomic Wall Clock.

വാറൻ്റിയും പിന്തുണയും

For warranty information or technical support, please refer to the official MARATHON webസൈറ്റിൽ ബന്ധപ്പെടുക അല്ലെങ്കിൽ അവരുടെ ഉപഭോക്തൃ സേവന വിഭാഗവുമായി ബന്ധപ്പെടുക. വാങ്ങിയതിന്റെ തെളിവായി നിങ്ങളുടെ വാങ്ങൽ രസീത് സൂക്ഷിക്കുക.

Webസൈറ്റ്: www.marathonwatch.com