Melnor XT Mini-Turbo Oscillating Sprinkler on a Spike

ആമുഖം

The Melnor XT Mini-Turbo Oscillating Sprinkler on a Spike is designed to provide efficient and flexible watering for your lawn and garden. This compact sprinkler offers advanced adjustability, allowing precise control over watering range, width, and flow, covering areas up to 3,900 sq. ft. Its durable spike design ensures stable placement in various landscapes.

പ്രധാന സവിശേഷതകളിൽ ഇവ ഉൾപ്പെടുന്നു:

• Compact design with a metal spike for discreet placement.
• Smooth operating tabs for controlling watering pattern length (10 to 75 feet).
• Patented one-touch adjustment for watering pattern width (10 to 53 feet).
• Integrated flow control dial for micro-adjustment of water output.
• 360-degree rotation capability.
• Infinity Turbo Motor for consistent operation at varying water pressures.

സുരക്ഷാ വിവരങ്ങൾ

മുന്നറിയിപ്പ്: കാൻസർ, ജനന വൈകല്യങ്ങൾ അല്ലെങ്കിൽ മറ്റ് പ്രത്യുൽപാദന വൈകല്യങ്ങൾ എന്നിവയ്ക്ക് കാരണമാകുമെന്ന് കാലിഫോർണിയ സംസ്ഥാനത്തിന് അറിയാവുന്ന ലെഡ് ഉൾപ്പെടെയുള്ള രാസവസ്തുക്കൾ, കാലിഫോർണിയ സംസ്ഥാനത്തിന് ക്യാൻസറിന് കാരണമാകുമെന്ന് അറിയപ്പെടുന്ന സ്റ്റൈറിൻ എന്നിവ ഈ ഉൽപ്പന്നത്തിന് നിങ്ങളെ തുറന്നുകാട്ടാൻ കഴിയും. കൂടുതൽ വിവരങ്ങൾക്ക് പോകുക www.P65Warnings.ca.gov. For outdoor use only.

ഉൽപ്പന്ന ഘടകങ്ങൾ

Figure 1: Melnor XT Mini-Turbo Oscillating Sprinkler on a Spike, showing the main unit and spike.

Figure 2: Diagram illustrating the three main adjustment controls: Range, Width, and Flow, along with 360-degree adjustability.

ചിത്രം 3: മുകളിൽ view of the sprinkler head showing the range and width adjustment tabs.

സജ്ജമാക്കുക

1. സ്പ്രിംഗ്ളർ അൺപാക്ക് ചെയ്യുക: Carefully remove the sprinkler from its packaging. Inspect for any damage.
2. ജലസ്രോതസ്സുമായി ബന്ധിപ്പിക്കുക: Attach a standard garden hose to the inlet connection at the base of the sprinkler. Ensure the connection is tight to prevent leaks. The sprinkler features a 0.75-inch inlet connection.
3. സ്പ്രിംഗ്ളർ സ്ഥാപിക്കുക: Insert the metal spike firmly into the ground in the desired watering area. Ensure the sprinkler head is level for optimal water distribution. The sturdy step-spike allows for easy and secure placement.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The Melnor XT Mini-Turbo Sprinkler offers precise control over your watering pattern. Refer to Figure 2 and Figure 3 for visual guidance on the controls.

1. Adjusting Watering Range (Length)

• Locate the smooth operating tabs on the sides of the sprinkler head (labeled '1' in Figure 2).
• Slide these tabs to set the desired length of the watering pattern. The range can be adjusted from 10 feet to up to 75 feet.
• You can also adjust the position of the pattern to water left, right, or center of the sprinkler.

2. Adjusting Watering Width

• Use the patented one-touch adjustment controls (labeled '2' in Figure 2) located on the top of the sprinkler.
• These controls allow you to set the watering width from as little as 10 feet to as much as 53 feet wide.
• Each side of the watering pattern can be adjusted independently for customized coverage.

3. ഫ്ലോ നിയന്ത്രണം ക്രമീകരിക്കൽ.

• The integrated flow control dial (labeled '3' in Figure 2) is located near the base of the sprinkler head.
• Rotate this dial to micro-adjust the water flow, optimizing your watering pattern and conserving water.

4. 360-ഡിഗ്രി റൊട്ടേഷൻ

• The sprinkler head can be rotated 360 degrees on its spike to direct water precisely where needed.

മെയിൻ്റനൻസ്

1. ഫിൽട്ടർ വൃത്തിയാക്കൽ: Periodically check the filter screen located at the hose connection inlet. If debris is present, disconnect the hose, remove the filter, rinse it thoroughly under running water, and reinsert it.
2. ശീതകാലം: Before the first frost, disconnect the sprinkler from the hose. Drain all water from the sprinkler to prevent freezing and potential damage. Store the sprinkler in a dry, protected area during winter months.
3. പൊതുവായ ശുചീകരണം: പരസ്യം ഉപയോഗിച്ച് സ്പ്രിംഗ്ലറിന്റെ പുറംഭാഗം തുടയ്ക്കുക.amp cloth to remove dirt and mineral deposits. Avoid using harsh chemicals that could damage the plastic components.

ട്രബിൾഷൂട്ടിംഗ്

• അസമമായ സ്പ്രേ പാറ്റേൺ:
  • Ensure the sprinkler is placed on level ground.
  • Check for clogged nozzles on the sprinkler head. Use a small pin or needle to clear any blockages.
  • Verify adequate water pressure from your hose.
• Low Water Pressure/Reduced Coverage:
  • Check the filter screen at the hose connection for clogs (refer to Maintenance section).
  • Ensure the water source (faucet) is fully open.
  • Inspect the hose for kinks or leaks.
  • Adjust the flow control dial to ensure it is not restricting water flow excessively.
• Sprinkler Not Oscillating:
  • Ensure sufficient water pressure. The Infinity Turbo Motor requires a minimum pressure to operate correctly.
  • Check for any obstructions around the oscillating mechanism.

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റി & പിന്തുണ

This Melnor XT Mini-Turbo Oscillating Sprinkler is backed by a Melnor Lifetime Limited Warranty. Melnor is committed to the quality and performance of its products.

For any questions, feedback, or warranty claims, please refer to the official Melnor website or contact their customer support directly. Your experience with Melnor products is valued.