Mitutoyo 513-401-10E Dial Test Indicator Instruction Manual

1. ആമുഖം

This manual provides essential instructions for the proper use, setup, and maintenance of your Mitutoyo 513-401-10E Dial Test Indicator. Designed for high-precision measurement, this instrument offers 1 µm accuracy and a 0.001 mm graduation for detailed dimensional inspection. Adhering to these guidelines will ensure optimal performance and longevity of the device.

2. ഉൽപ്പന്നം കഴിഞ്ഞുview ഘടകങ്ങളും

The Mitutoyo 513-401-10E is a precision dial test indicator used for various measurement tasks, including alignment, runout, and flatness checks. Key components include the main body, a yellow dial face for clear readings, a contact point, and a clamp ring for mounting.

ചിത്രം 1: ഒരു വശം view of the Mitutoyo 513-401-10E Dial Test Indicator, showing the yellow dial face, the main body, and the contact point.

പ്രധാന സവിശേഷതകൾ:

• Contact point effective length is printed on the dial face for quick reference.
• Enhanced impact resistance and durability of internal gears and bezel.
• Includes an inspection certificate with bidirectional evaluation, ensuring accuracy.
• Crystal is designed with increased scratch-resistance for prolonged clarity.

ഉൾപ്പെടുത്തിയ ഘടകങ്ങൾ:

• Dial Test Indicator unit
• കോൺടാക്റ്റ് പോയിൻ്റ്
• Clamp മോതിരം
• തണ്ട്

ചിത്രം 2: എ വിശദമായി view of the yellow dial face of the Mitutoyo 513-401-10E, showing graduations from 0 to 70, the Mitutoyo logo, 'MADE IN JAPAN', '1µm' accuracy mark, and model number 'No. 513-401-10'.

3. സജ്ജീകരണം

1. അൺപാക്ക് ചെയ്യുന്നു: Carefully remove the dial test indicator and all accessories from its packaging. Inspect for any visible damage.
2. മൗണ്ടിംഗ്: Securely attach the indicator to a stable stand or fixture using the provided clamp ring and stem. Ensure the mounting is rigid to prevent measurement errors due to vibration or movement.
3. Contact Point Installation: Ensure the contact point is firmly screwed into the lever arm. The effective length of the contact point is crucial for accurate readings and is typically indicated on the dial face.
4. സ്ഥാനനിർണ്ണയം: Position the indicator so that the contact point is perpendicular to the surface being measured. Apply slight pre-load to the contact point to ensure consistent contact and allow for bidirectional measurement.
5. പൂജ്യം: Rotate the outer bezel to align the '0' mark on the dial with the indicator needle. This establishes the reference point for your measurements.

4. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The Mitutoyo 513-401-10E is designed for precise comparative measurements. Follow these steps for accurate operation:

1. Establish Reference: Place the contact point on a known reference surface or datum point. Adjust the indicator's position until the needle is within the measurement range and then zero the dial by rotating the bezel.
2. അളവ് നടത്തുക: Move the indicator's contact point across the surface or feature to be measured. The needle will deflect, indicating variations from the zero reference point.
3. ഡയൽ വായിക്കുക: The dial is graduated in 0.001 mm increments. Each major division (e.g., 10, 20) represents 0.01 mm. The total measurement range is 0.14 mm. Observe the needle's movement to determine the deviation.
4. Bidirectional Measurement: This indicator supports bidirectional measurement, meaning it can measure deviations in both directions from the reference point. The inspection certificate confirms this capability.
5. ആവർത്തനക്ഷമത: For critical measurements, perform multiple readings at the same point to ensure consistency and verify the instrument's repeatability.

കുറിപ്പ്: Always ensure the contact point is clean and free from debris before and during measurements to maintain accuracy.

5. പരിപാലനം

Proper maintenance is crucial for preserving the accuracy and lifespan of your Mitutoyo Dial Test Indicator.

• വൃത്തിയാക്കൽ: After each use, gently wipe the indicator body and contact point with a clean, soft cloth. For stubborn dirt, a cloth lightly dampened with isopropyl alcohol can be used. Avoid harsh chemicals or abrasive materials.
• സംഭരണം: Store the indicator in its protective case when not in use. Keep it in a dry, dust-free environment, away from direct sunlight, extreme temperatures, and corrosive substances.
• കൈകാര്യം ചെയ്യൽ: Handle the instrument with care. Avoid dropping or subjecting it to strong impacts, as this can affect its precision and internal mechanisms.
• പരിശോധന: Periodically inspect the contact point for wear or damage. A worn contact point can lead to inaccurate readings.
• കാലിബ്രേഷൻ: For professional applications, regular calibration by a qualified technician is recommended to ensure continued accuracy.

6. പ്രശ്‌നപരിഹാരം

7 സ്പെസിഫിക്കേഷനുകൾ

8. വാറൻ്റിയും പിന്തുണയും

Mitutoyo products are known for their quality and precision. For specific warranty information, please refer to the documentation included with your purchase or visit the official Mitutoyo website. In case of technical issues, repair, or calibration services, contact Mitutoyo customer support or an authorized service center. Always provide your model number (513-401-10E) when seeking support.

കൂടുതൽ സഹായത്തിന്, നിങ്ങൾക്ക് സന്ദർശിക്കാവുന്നതാണ് Mitutoyo Store on Amazon.