Steinbach Active Balls+ Filter System Instruction Manual

ആമുഖം

This manual provides comprehensive instructions for the safe and efficient installation, operation, and maintenance of your Steinbach Active Balls+ Filter System, model 040386. This non-self-priming pump is designed to maintain crystal-clear water in pools up to approximately 19,000 liters. Please read this manual thoroughly before initial use to ensure proper function and longevity of your filter system.

സുരക്ഷാ നിർദ്ദേശങ്ങൾ

പരിക്കുകളോ കേടുപാടുകളോ തടയാൻ ഇനിപ്പറയുന്ന സുരക്ഷാ മുൻകരുതലുകൾ എപ്പോഴും പാലിക്കുക:

• Ensure the power supply matches the specifications on the product label.
• ഏതെങ്കിലും അറ്റകുറ്റപ്പണികൾ അല്ലെങ്കിൽ വൃത്തിയാക്കൽ നടത്തുന്നതിന് മുമ്പ് വൈദ്യുതി വിതരണം വിച്ഛേദിക്കുക.
• പവർ കോർഡിനോ പ്ലഗ്ഗിനോ കേടുപാടുകൾ സംഭവിച്ചാൽ പമ്പ് പ്രവർത്തിപ്പിക്കരുത്.
• പ്രവർത്തന സമയത്ത് കുട്ടികളെയും അനധികൃത വ്യക്തികളെയും ഫിൽട്ടർ സിസ്റ്റത്തിൽ നിന്ന് അകറ്റി നിർത്തുക.
• Install the filter system on a stable, level surface, protected from direct sunlight and rain.
• Do not run the pump dry. Ensure it is always filled with water during operation.
• Maximum water temperature for operation is 35°C (95°F).
• Suitable for saltwater up to a salt content of 5 g/l.

ഉൽപ്പന്നം കഴിഞ്ഞുview ഘടകങ്ങളും

The Steinbach Active Balls+ Filter System consists of several key components designed for optimal pool water filtration.

ചിത്രം 1: ഓവർview of the Steinbach Active Balls+ Filter System components, showing the filter tank, pump unit, and various connection parts.

ചിത്രം 2: വിശദമായി view of the 7-way valve, indicating various operational modes such as Filter, Rinse, Waste, Recirculate, Closed, and Backwash.

Figure 3: Product label displaying technical specifications of the pump, including model number, power, voltage, and maximum temperature.

Figure 4: The filter system alongside a visual representation of the filter balls, which are the primary filtration medium.

Figure 5: Dimensional diagram illustrating the approximate height of the filter tank, which is 55 cm (22 inches).

സജ്ജമാക്കുക

Follow these steps for initial setup of your filter system:

1. ഘടകങ്ങൾ അൺപാക്ക് ചെയ്യുക: പാക്കേജിംഗിൽ നിന്ന് എല്ലാ ഭാഗങ്ങളും ശ്രദ്ധാപൂർവ്വം നീക്കം ചെയ്യുക. പാക്കിംഗ് ലിസ്റ്റ് അനുസരിച്ച് എല്ലാ ഘടകങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക.
2. Position the System: Place the filter system on a firm, level surface near your pool, ensuring it is protected from direct weather exposure.
3. Install Filter Balls: Open the filter tank and carefully pour the approximately 300g of filter balls into the tank. Ensure the central pipe is correctly positioned before closing the tank.
4. Connect Pump to Filter Tank: Attach the pump unit to the filter tank using the provided connections. Ensure all seals are properly seated and connections are tightened to prevent leaks. It is recommended to use PTFE tape on threaded connections for a secure seal.
5. പൂളിലേക്ക് കണക്റ്റുചെയ്യുക: Connect the pool hoses to the filter system's inlet and outlet ports. The inlet hose typically connects from the pool skimmer/main drain to the pump's suction side, and the outlet hose connects from the filter's return side back to the pool.
6. വെള്ളം നിറയ്ക്കുക: Before starting the pump, ensure the pool is filled with water and the filter system is primed by allowing water to flow into the pump and filter tank.
7. ഇലക്ട്രിക്കൽ കണക്ഷൻ: Connect the power plug to a grounded electrical outlet. Ensure the outlet is protected by a Residual Current Device (RCD) for safety.

Operating the 7-Way Valve

The 7-way valve controls the flow of water through the filter system. Always turn off the pump before changing the valve position.

• ഫിൽട്ടർ: This is the standard operating position for daily filtration. Water flows from the pool, through the filter balls, and back to the pool.
• ബാക്ക്വാഷ്: Used for cleaning the filter balls. Water flows in reverse through the filter, dislodging trapped debris, and is then directed to waste. Perform backwash when the pressure gauge indicates higher than normal pressure or when water flow decreases.
• കഴുകുക: Used after backwashing to flush out any remaining debris from the filter and settle the filter balls. Water flows through the filter and is directed to waste.
• മാലിന്യം: Bypasses the filter and sends water directly from the pool to waste. Useful for vacuuming heavy debris directly to waste or lowering the pool water level.
• പുനഃക്രമീകരിക്കുക: Circulates water through the pump and back to the pool without passing through the filter. Useful for distributing chemicals quickly.
• അടച്ചു: Shuts off all flow to the filter and pump. Use this position only when the pump is off and for maintenance or when the pool is not in use.
• ശീതകാലം: (If applicable) Position for draining the system for winter storage. Consult specific winterization instructions.

മെയിൻ്റനൻസ്

Regular maintenance ensures optimal performance and extends the life of your filter system.

• ബാക്ക് വാഷിംഗ്: Perform backwashing regularly, typically once a week or when the pressure gauge reading increases by 0.2-0.3 bar (3-5 psi) above its clean operating pressure.
  1. പമ്പ് ഓഫ് ചെയ്യുക.
  2. Set the 7-way valve to "BACKWASH".
  3. Turn on the pump and run until the water in the sight glass (if present) runs clear (approx. 2-3 minutes).
  4. പമ്പ് ഓഫ് ചെയ്യുക.
  5. Set the 7-way valve to "RINSE".
  6. പമ്പ് ഓണാക്കി 30-60 സെക്കൻഡ് പ്രവർത്തിപ്പിക്കുക.
  7. പമ്പ് ഓഫ് ചെയ്യുക.
  8. Set the 7-way valve back to "FILTER".
  9. Turn on the pump to resume normal filtration.
• ഫിൽറ്റർ ബോളുകൾ വൃത്തിയാക്കൽ: The filter balls can be cleaned manually or in a washing machine (in a laundry bag) at 30°C (86°F) without fabric softener. Replace filter balls when they show signs of significant wear or reduced filtration efficiency.
• Pump Basket Cleaning: Periodically check and clean the pump's pre-filter basket (if applicable) to remove large debris that could obstruct flow.
• ശീതകാലം: Before freezing temperatures, drain all water from the pump, filter tank, and hoses. Store the pump and valve in a dry, frost-free location.

ട്രബിൾഷൂട്ടിംഗ്

പൊതുവായ പ്രശ്നങ്ങളും അവയുടെ പരിഹാരങ്ങളും അറിയാൻ ഈ വിഭാഗം കാണുക.

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റിയും പിന്തുണയും

For warranty information and technical support, please refer to the documentation provided with your purchase or contact Steinbach customer service. Keep your proof of purchase for warranty claims.