Shinko R525 Cheater Rear Tire (110/90-19 62M)

ഷിങ്കോ R525 ചീറ്റർ റിയർ ടയർ യൂസർ മാനുവൽ

Model: Shinko R525 Cheater Rear Tire (110/90-19 62M)

ബ്രാൻഡ്: ഷിങ്കോ

1. ഉൽപ്പന്നം കഴിഞ്ഞുview

The Shinko R525 Cheater Rear Tire is a specialized off-road motorcycle tire designed for extreme single track and hard enduro conditions. It combines the soft, sticky rubber compound found in trials tires with a knobby tread pattern, offering superior traction across a wider range of soil conditions compared to traditional trials tires. This hybrid design aims to improve braking performance and traction in loose soil, making it an ideal choice for challenging off-road environments.

The R525 model excels in looser, loamier soil conditions, providing enhanced confidence for riders navigating demanding terrain.

Shinko R525 Cheater Rear Tire, side view

ചിത്രം 1.1: വശം view of the Shinko R525 Cheater Rear Tire, showcasing its aggressive knobby tread pattern.

2. ഇൻസ്റ്റലേഷനും സജ്ജീകരണവും

Proper installation of the Shinko R525 Cheater Rear Tire is critical for safety and performance. It is highly recommended that tire installation be performed by a qualified professional using appropriate tools and safety procedures.

2.1 സുരക്ഷാ മുൻകരുതലുകൾ

2.2 Mounting Instructions (General Guidelines)

  1. Remove Old Tire: Deflate the old tire, break the beads, and carefully remove it from the rim.
  2. Inspect Rim: Thoroughly inspect the rim for any damage, cracks, or sharp edges. Clean the rim thoroughly.
  3. ലൂബ്രിക്കേറ്റ്: Apply a generous amount of tire mounting lubricant to both beads of the new Shinko R525 tire and the rim flanges.
  4. Position Tire: Place one bead of the tire over the rim. For the second bead, use tire irons carefully, taking small bites to avoid pinching the inner tube (if applicable) or damaging the tire bead or rim.
  5. Install Inner Tube (if applicable): If using an inner tube, slightly inflate it before inserting it into the tire to prevent pinching.
  6. ടയർ വീർപ്പിക്കുക: Slowly inflate the tire, ensuring both beads seat properly on the rim. Listen for two distinct "pops" as the beads seat. Do not exceed the maximum seating pressure indicated on the tire sidewall.
  7. Check Bead Seating: Visually inspect the tire around the entire circumference on both sides to ensure the beads are evenly seated. There should be a uniform line visible just above the rim flange.
  8. സമ്മർദ്ദം ക്രമീകരിക്കുക: Once seated, adjust the tire pressure to the recommended operating pressure for your specific riding conditions and motorcycle.
Close-up of Shinko R525 Cheater Rear Tire tread

ചിത്രം 2.1: ക്ലോസപ്പ് view of the Shinko R525 Cheater Rear Tire's aggressive tread blocks, designed for maximum grip.

3. Operating Conditions and Performance

The Shinko R525 Cheater Rear Tire is engineered for optimal performance in specific off-road conditions. Understanding its design intent will help maximize its benefits.

3.1 ഉദ്ദേശിച്ച ഉപയോഗം

3.2 പ്രകടന സവിശേഷതകൾ

ടോപ്പ് ഡൗൺ view of Shinko R525 Cheater Rear Tire tread pattern

ചിത്രം 3.1: മുകളിൽ നിന്ന് താഴേക്ക് view highlighting the unique tread pattern of the Shinko R525 Cheater Rear Tire, optimized for off-road grip.

4. പരിപാലനം

Regular maintenance extends the life of your Shinko R525 Cheater Rear Tire and ensures consistent performance.

4.1 ടയർ മർദ്ദം

4.2 പരിശോധന

4.3 വൃത്തിയാക്കലും സംഭരണവും

Full top-down view of Shinko R525 Cheater Rear Tire

Figure 4.1: Full top-down view of the Shinko R525 Cheater Rear Tire, showing the complete tread pattern from bead to bead.

5. പ്രശ്‌നപരിഹാരം

This section addresses common issues you might encounter with your Shinko R525 Cheater Rear Tire.

ഇഷ്യൂസാധ്യമായ കാരണംപരിഹാരം
Loss of Traction / Poor GripIncorrect tire pressure (too high or too low), worn tread, unsuitable terrain for tire type, suspension issues.Adjust tire pressure to recommended levels for terrain. Inspect tread wear. Ensure tire is suitable for conditions. Check motorcycle suspension.
അസമമായ ട്രെഡ് വെയർImproper tire pressure, unbalanced wheel, worn suspension components, aggressive riding style.Maintain correct tire pressure. Have wheel balanced. Inspect and service suspension. Adjust riding style.
പതിവ് പഞ്ചറുകൾLow tire pressure, sharp objects in riding area, old or damaged inner tube (if applicable), rim strip issues.Maintain proper tire pressure. Avoid riding over sharp debris. Replace inner tube if damaged. Inspect and replace rim strip. Consider heavy-duty tubes or tubeless conversion if applicable.
Tire Wobble / VibrationImproperly seated bead, unbalanced wheel, damaged tire, bent rim.Re-seat tire bead. Have wheel balanced. Inspect tire for damage. Check rim for trueness. Seek professional assistance if issue persists.

6 സ്പെസിഫിക്കേഷനുകൾ

Key technical specifications for the Shinko R525 Cheater Rear Tire (110/90-19 62M):

ആട്രിബ്യൂട്ട്മൂല്യം
ബ്രാൻഡ്ഷിൻകോ
മോഡൽR525 Cheater Rear Tire
ടയർ വലിപ്പം110/90-19
ലോഡ് റേറ്റിംഗ്62 (Equivalent to 584 lbs / 265 kg)
വേഗതാ റേറ്റിംഗ്M (Up to 81 mph / 130 km/h)
റിം വലിപ്പം19 ഇഞ്ച്
ടയർ തരംOff-road, Hybrid Hard Enduro / Extreme Single Track
അപേക്ഷപിൻഭാഗം
യു.പി.സി644978374246
നിർമ്മാതാവിൻ്റെ ഭാഗം നമ്പർ87-4328എസ്

7. വാറൻ്റി വിവരങ്ങൾ

Shinko Tires typically come with a limited warranty covering manufacturing defects. Specific warranty terms and conditions may vary by region and product. For detailed warranty information, please refer to the official Shinko Tires website or contact your authorized Shinko dealer. Keep your proof of purchase for any warranty claims.

8. ഉപഭോക്തൃ പിന്തുണ

For technical assistance, product inquiries, or support regarding your Shinko R525 Cheater Rear Tire, please contact Shinko Tires customer service or your local authorized dealer. You can usually find contact information on the official Shinko Tires webസൈറ്റ്.

When contacting support, please have your tire's model number (R525 Cheater Rear Tire), size (110/90-19), and any relevant purchase information ready.

അനുബന്ധ രേഖകൾ - R525 Cheater Rear Tire (110/90-19 62M)

പ്രീview ഷിങ്കോ HR-706 ഹൈബ്രിഡ് റെക്കോർഡർ (ഡോട്ട് പ്രിന്റിംഗ്) ഇൻസ്ട്രക്ഷൻ മാനുവൽ
ഷിങ്കോ HR-706 ഹൈബ്രിഡ് റെക്കോർഡറിനായുള്ള വിശദമായ മാർഗ്ഗനിർദ്ദേശം ഈ സമഗ്ര നിർദ്ദേശ മാനുവലിൽ ഉൾപ്പെടുന്നു. സുരക്ഷിതമായ പ്രവർത്തനം, ഇൻസ്റ്റാളേഷൻ, വയറിംഗ്, ഉപകരണ ക്രമീകരണങ്ങൾ, ആശയവിനിമയ പ്രോട്ടോക്കോളുകൾ, അറ്റകുറ്റപ്പണി നടപടിക്രമങ്ങൾ, പൊതുവായ പ്രശ്‌നങ്ങൾ പരിഹരിക്കൽ, ഉപകരണത്തിന്റെ ഒപ്റ്റിമൽ പ്രകടനവും ദീർഘായുസ്സും ഉറപ്പാക്കുന്നതിനുള്ള സാങ്കേതിക സവിശേഷതകൾ എന്നിവയെക്കുറിച്ചുള്ള അവശ്യ വിവരങ്ങൾ ഇതിൽ ഉൾക്കൊള്ളുന്നു.
പ്രീview Shinko HR-700シリーズ ハイブリッド記録計:コンパクト、高視認性産業用データロガー
Shinko HR-700シリーズハイブリッド記録計の仕様、特徴、寸法。コンパクト設計、大型LED表示、IP65準拠、産業オートメーション向けの多様な入力オプションを特長としています。
പ്രീview ഷിങ്കോ SIF-600 PLC ഇന്റർഫേസ് യൂണിറ്റ്: ഇൻസ്ട്രക്ഷൻ മാനുവൽ
വ്യാവസായിക ഓട്ടോമേഷൻ ആപ്ലിക്കേഷനുകൾക്കായുള്ള ഇൻസ്റ്റാളേഷൻ, സജ്ജീകരണം, പ്രവർത്തനം, ട്രബിൾഷൂട്ടിംഗ് എന്നിവ ഉൾക്കൊള്ളുന്ന ഷിങ്കോ SIF-600 PLC ഇന്റർഫേസ് യൂണിറ്റിനെക്കുറിച്ച് ഈ സമഗ്രമായ നിർദ്ദേശ മാനുവൽ വിശദമായി പ്രതിപാദിക്കുന്നു. സുരക്ഷിതവും ഫലപ്രദവുമായ ഉപയോഗത്തിന് അത്യന്താപേക്ഷിതമാണ്.
പ്രീview ഷിങ്കോ ACS2 ഡിജിറ്റൽ ഇൻഡിക്കേറ്റിംഗ് കൺട്രോളർ ഇൻസ്ട്രക്ഷൻ മാനുവൽ
ഷിങ്കോ എസിഎസ്2 ഡിജിറ്റൽ ഇൻഡിക്കേറ്റിംഗ് കൺട്രോളറിനായുള്ള വിശദമായ നിർദ്ദേശ മാനുവൽ, വ്യാവസായിക താപനില നിയന്ത്രണ ആപ്ലിക്കേഷനുകൾക്കുള്ള ഇൻസ്റ്റാളേഷൻ, വയറിംഗ്, പ്രവർത്തനം, ക്രമീകരണങ്ങൾ, ട്രബിൾഷൂട്ടിംഗ് എന്നിവ ഉൾക്കൊള്ളുന്നു.
പ്രീview ഷിങ്കോ QMC1 കമ്മ്യൂണിക്കേഷൻ എക്സ്പാൻഷൻ മൊഡ്യൂൾ ഇൻസ്ട്രക്ഷൻ മാനുവൽ
ഷിങ്കോ ക്യുഎംസി1 കമ്മ്യൂണിക്കേഷൻ എക്സ്പാൻഷൻ മൊഡ്യൂളിനെക്കുറിച്ചുള്ള സമഗ്രമായ വിശദാംശങ്ങൾ ഈ നിർദ്ദേശ മാനുവൽ നൽകുന്നു, അതിന്റെ ഇൻസ്റ്റാളേഷൻ, വയറിംഗ്, പ്രവർത്തനം, കമ്മ്യൂണിക്കേഷൻ പ്രോട്ടോക്കോളുകൾ, വ്യാവസായിക നിയന്ത്രണ സംവിധാനങ്ങൾക്കായുള്ള സ്പെസിഫിക്കേഷനുകൾ എന്നിവ ഇതിൽ ഉൾപ്പെടുന്നു. അതിന്റെ സവിശേഷതകൾ, സജ്ജീകരണം, ഹോസ്റ്റ് കമ്പ്യൂട്ടറുകളുമായും പിഎൽസികളുമായും ഉള്ള സംയോജനം എന്നിവയെക്കുറിച്ച് അറിയുക.
പ്രീview WIL-101-TU デジタル指示濁度/SS 計 取扱説明書
ഷിങ്കോ വിൽ-101-TU デジタル指示濁度/SS計の取扱説明書。本製品の設置、機能、操作、配線、仕様、校正、通നിങ്ങൾ