ആമുഖം
This manual provides essential information for the proper installation, use, and maintenance of the Hitachi 372535 Bracket (A) C10Fshc. This component is a genuine Hitachi replacement part, designed to ensure compatibility and performance with specified Hitachi power tools. Please read this manual thoroughly before proceeding with installation or use.
ഉൽപ്പന്നം കഴിഞ്ഞുview
The Hitachi 372535 Bracket (A) is a critical replacement component for the C10Fshc model. It is manufactured to Hitachi's high standards, ensuring durability and precise fit. As Hitachi Power Tools has transitioned to Metabo HPT, this part maintains the same quality and design.
- Genuine Hitachi (now Metabo HPT) replacement part.
- Designed for specific compatibility with the C10Fshc model.
- Ensures proper function and structural integrity of the power tool.
ഇൻസ്റ്റാളേഷനും സജ്ജീകരണവും
സുരക്ഷ ആദ്യം: Always disconnect the power tool from its power source before attempting any installation or replacement. Wear appropriate personal protective equipment (PPE), such as safety glasses and gloves.
- Identify the Original Part: Locate the existing bracket on your C10Fshc power tool that requires replacement.
- Remove Old Bracket: Carefully remove any fasteners (screws, bolts, etc.) securing the old bracket. Note their positions and types for reassembly.
- പരിശോധനാ പ്രദേശം: Clean the area where the new bracket will be installed, ensuring no debris or obstructions.
- പുതിയ ബ്രാക്കറ്റിന്റെ സ്ഥാനം: Align the Hitachi 372535 Bracket (A) into its correct position.
- Secure New Bracket: Reinstall the fasteners, tightening them securely but without over-tightening, which could damage the bracket or tool housing.
- പ്രവർത്തനക്ഷമത പരിശോധന: After installation, manually check the movement or stability of the component the bracket supports to ensure proper function before reconnecting power.
മെയിൻ്റനൻസ്
As a replacement part, the 372535 Bracket (A) requires minimal maintenance.
- പതിവ് പരിശോധന: Periodically inspect the bracket for any signs of wear, damage, or loosening of fasteners.
- വൃത്തിയാക്കൽ: Keep the bracket and surrounding area clean from dust and debris to prevent interference with moving parts (if applicable).
- സംഭരണം: Store any spare brackets in a dry, clean environment away from extreme temperatures.
ട്രബിൾഷൂട്ടിംഗ്
If you encounter issues after installing the 372535 Bracket (A), consider the following:
- അയഞ്ഞ ഫിറ്റ്: Ensure all fasteners are properly tightened. Refer to the power tool's main instruction manual for specific torque specifications if available.
- Incorrect Alignment: Verify that the bracket is correctly oriented and aligned with its mating components.
- Persistent Issue: If the problem persists, it may indicate an issue with another component of the power tool or incorrect part identification. Consult a qualified service technician or refer to the complete service manual for your C10Fshc tool.
സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| ഭാഗം നമ്പർ | 372535 |
| ഇനം മോഡൽ നമ്പർ | 372535 |
| ബ്രാൻഡ് | Hitachi (Metabo HPT) |
| ഉൾപ്പെടുത്തിയ ഘടകങ്ങൾ | Hitachi 372535 BRACKET (A)C10FSHC |
| ഇനത്തിൻ്റെ ഭാരം | 1 പൗണ്ട് |
| ഉൽപ്പന്ന അളവുകൾ | 1 x 1 x 1 ഇഞ്ച് |
| ഇനത്തിൻ്റെ പാക്കേജ് അളവ് | 1 |
| അളക്കൽ സംവിധാനം | മെട്രിക് |
| ബാറ്ററികൾ ആവശ്യമാണ് | ഇല്ല |
| നിർമ്മാതാവ് | കോക്കി ഹോൾഡിംഗ്സ് അമേരിക്ക, ലിമിറ്റഡ് |
| ആദ്യ തീയതി ലഭ്യമാണ് | ഫെബ്രുവരി 13, 2018 |
വാറൻ്റിയും പിന്തുണയും
For information regarding warranty coverage or technical support for your Hitachi (Metabo HPT) power tool or genuine replacement parts, please refer to the official Hitachi or Metabo HPT website or contact their customer service directly. Always use genuine replacement parts to maintain warranty validity and ensure optimal performance.
