DIGITEN DHC101 Digital Humidity Controller

1. ഉൽപ്പന്നം കഴിഞ്ഞുview

The DIGITEN DHC101 is a pre-wired digital humidistat designed for precise humidity control. It supports both humidification and dehumidification modes, making it suitable for a wide range of applications such as grow tents, mushroom cultivation, greenhouses, reptile enclosures, homebrewing, and more. The controller features a clear LED display, easy-to-use buttons, and a sensitive external sensor probe to accurately monitor and regulate humidity levels.

The DIGITEN DHC101 Humidity Controller, featuring a digital display, sensor probe, and pre-wired power outlet and plug.

ഒരു ഓവർview highlighting the controller's main features: dual-mode operation (humidifying/dehumidifying), percentage humidity display, large LED screen for readability, and an integrated alarm function.

2. സജ്ജീകരണ നിർദ്ദേശങ്ങൾ

1. അൺപാക്ക് ചെയ്യുന്നു: Carefully remove the DHC101 controller and its accessories from the packaging. Ensure all components are present: the main controller unit, the external humidity sensor probe, and the pre-wired power cables.
2. സെൻസർ കണക്ഷൻ: Locate the small jack on the side of the controller unit. Insert the plug of the external humidity sensor probe firmly into this jack. Ensure a secure connection.

The external humidity sensor probe with its connecting cable, designed for accurate environmental monitoring.
3. പ്ലേസ്മെൻ്റ്: Position the controller unit in a stable location. The unit can be hung using the integrated hanging hole or placed on a flat surface. Ensure the sensor probe is placed within the environment where humidity needs to be controlled, away from direct water spray or extreme temperatures that could affect its accuracy.
4. പവർ കണക്ഷൻ: Plug the controller's main power plug into a standard electrical outlet. The LED display will illuminate, showing the current humidity reading.
5. ഉപകരണ കണക്ഷൻ: Plug your humidifying or dehumidifying appliance (e.g., humidifier, dehumidifier, exhaust fan) into the pre-wired outlet on the DHC101 controller.

3. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The DHC101 offers both humidification and dehumidification modes. The display shows the current humidity (PV), the set start humidity (SV), and the set stop humidity (DV).

വിശദമായി view of the controller's illuminated LED display showing humidity readings and settings, along with the hanging hole, 3-prong grounded plug, and sensitive probe connection.

Setting Humidity Parameters:

1. ക്രമീകരണ മോഡ് നൽകുക: അമർത്തിപ്പിടിക്കുക സെറ്റ് button for 3 seconds to enter the parameter setting mode. The display will show 'F1'.
2. പാരാമീറ്റർ തിരഞ്ഞെടുക്കുക: ഉപയോഗിക്കുക UP or താഴേക്ക് arrows to cycle through the parameters (F1, F2, F3, etc.).
3. മൂല്യം ക്രമീകരിക്കുക: Once the desired parameter (e.g., F1 for start humidity) is displayed, press സെറ്റ് വീണ്ടും view its current value. Use the UP or താഴേക്ക് arrows to adjust the value.
4. ക്രമീകരണം സംരക്ഷിക്കുക: അമർത്തുക സെറ്റ് to confirm and save the new value.
5. ക്രമീകരണ മോഡിൽ നിന്ന് പുറത്തുകടക്കുക: അമർത്തിപ്പിടിക്കുക സെറ്റ് for 3 seconds, or wait for 10 seconds without any button press, to exit the setting mode.

പ്രധാന പാരാമീറ്ററുകൾ:

• F1 (Start Humidity): Set the humidity percentage at which the connected device will activate.
• F2 (Stop Humidity): Set the humidity percentage at which the connected device will deactivate.
• F3 (Humidity Correction): Allows for calibration of the sensor reading if there is a known offset.
• F4 (Delay Start Time): Sets a delay before the device activates, protecting compressors in certain appliances.
• F5 (High Humidity Alarm): Set the upper humidity limit for an audible alarm.
• F6 (Low Humidity Alarm): Set the lower humidity limit for an audible alarm.

The controller will automatically switch between humidification and dehumidification based on the F1 and F2 settings. If F1 < F2, it operates in humidification mode. If F1 > F2, it operates in dehumidification mode.

4. പരിപാലനം

• സെൻസർ പരിചരണം: The humidity sensor is sensitive. Avoid submerging it in water or exposing it to corrosive substances. If the sensor becomes dirty, gently wipe it with a soft, dry cloth. Do not use abrasive cleaners.
• യൂണിറ്റ് വൃത്തിയാക്കൽ: Wipe the main controller unit with a soft, slightly damp തുണി. വീര്യം കൂടിയ ഡിറ്റർജന്റുകളോ ലായകങ്ങളോ ഉപയോഗിക്കരുത്. വൃത്തിയാക്കുന്നതിന് മുമ്പ് യൂണിറ്റ് പ്ലഗ് ഓഫ് ചെയ്തിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക.
• സംഭരണം: When not in use for extended periods, store the DHC101 in a cool, dry place, away from direct sunlight and extreme temperatures.

5. പ്രശ്‌നപരിഹാരം

• Display Not On: Ensure the controller is securely plugged into a working power outlet. Check the power source.
• കൃത്യമല്ലാത്ത ഈർപ്പം വായന:
  • Verify the sensor probe is correctly connected to the unit.
  • Check the sensor's placement; it should be in the environment to be controlled, not obstructed or in direct contact with moisture.
  • Consider using the F3 (Humidity Correction) parameter to fine-tune the reading if you have a reference hygrometer.
• Device Not Activating/Deactivating:
  • Confirm that the connected appliance is functioning correctly and is plugged firmly into the controller's outlet.
  • Review your F1 (Start Humidity) and F2 (Stop Humidity) settings to ensure they are appropriate for your desired operation mode (humidification or dehumidification).
  • Check the F4 (Delay Start Time) setting; a delay might be preventing immediate activation.
• Alarm Sounds Continuously:
  • The alarm indicates that the humidity has exceeded the F5 (High Humidity Alarm) or fallen below the F6 (Low Humidity Alarm) threshold.
  • Adjust your F5/F6 alarm settings if the current range is too narrow for your application, or address the environmental condition causing the humidity excursion.

6 സ്പെസിഫിക്കേഷനുകൾ

7. വാറൻ്റിയും പിന്തുണയും

DIGITEN provides a one-year warranty for any product quality problems. If you encounter any issues with your DHC101 Humidity Controller, please contact DIGITEN customer support for assistance. Ensure you have your purchase details and model number (DHC101) ready when contacting support.