Autophix OM127 JOBD/OBDII/EOBD Code Reader User Manual

1. ആമുഖം

The Autophix OM127 is a diagnostic tool designed to read and clear trouble codes from vehicle engine systems. It supports both JOBD (Japanese On-Board Diagnostics) and standard OBDII/EOBD protocols, making it compatible with a wide range of vehicles manufactured from 1996 onwards, including US, European, and Asian models, with particular emphasis on Japanese vehicles. This manual provides detailed instructions for the proper use, maintenance, and troubleshooting of your OM127 device.

2. ഉൽപ്പന്നം കഴിഞ്ഞുview

2.1 പ്രധാന സവിശേഷതകൾ

• Reads and clears generic, pending, and manufacturer-specific diagnostic trouble codes (DTCs).
• Turns off the Check Engine Light (MIL).
• Reads live data stream from the vehicle's sensors.
• Views freeze frame data, which captures vehicle conditions at the time a fault code is set.
• Displays I/M readiness status to check emission system monitors.
• വാഹന വിവരങ്ങൾ (VIN, CIN, CVN) വീണ്ടെടുക്കുന്നു.
• Supports all OBD II protocols: CAN, J1850 PWM, J1850 VPW, ISO9141, and KWP2000.
• Specifically designed for compatibility with Japanese vehicles (JOBD).
• Software upgradable via the internet.

2.2 ഉപകരണ ഘടകങ്ങൾ

The Autophix OM127 device consists of the main unit with a display and control buttons, and an integrated OBD-II connector cable.

ചിത്രം 1: Autophix OM127 Code Reader main unit. This image shows the front view of the OM127 diagnostic tool, featuring its yellow and black casing, backlit LCD screen displaying "Main Menu", "Select Brand", "OBDII System", and "Tool Setup", along with "ENTER", "EXIT", and arrow buttons. An integrated OBD-II cable extends from the top.

ചിത്രം 2: Autophix OM127 Code Reader with dimensions. This image illustrates the front and side profiles of the OM127 device, indicating its approximate dimensions: 130mm length, 78mm width, and 28mm height. The screen shows the main menu, and the device is labeled "JOBD/OBDII/EOBD".

ചിത്രം 3: OBD 16-pin connector. This image displays a close-up of the standard 16-pin OBD-II connector, which is used to link the OM127 device to the vehicle's diagnostic port.

2.3 പാക്കേജ് ഉള്ളടക്കം

The Autophix OM127 package typically includes the following items:

• 1 x AUTOPHIX OM127 JOBD/OBDII/EOBD Code Reader main unit
• 1 x ഉപയോക്തൃ മാനുവൽ (ഈ പ്രമാണം)
• 1 x കേസ് ചുമക്കുക

3. സജ്ജീകരണം

1. Locate the Vehicle's OBD-II Port: The OBD-II port is typically located under the dashboard on the driver's side, though its exact position may vary by vehicle model. Refer to your vehicle's owner's manual if you cannot locate it.
2. Connect the OM127: Plug the 16-pin OBD-II connector from the OM127 device firmly into the vehicle's OBD-II port.
3. പവർ ഓൺ: Once connected, the OM127 device will automatically power on, drawing power directly from the vehicle's battery. The display will illuminate, and the main menu will appear.
4. വാഹന ജ്വലനം: For most diagnostic functions, the vehicle's ignition should be in the "ON" position (engine off) or the engine should be running, depending on the specific test being performed.

4. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

ഉപയോഗിക്കുക UP ഒപ്പം താഴേക്ക് arrow buttons to navigate through menu options, the പ്രവേശിക്കുക button to confirm selections, and the പുറത്ത് button to return to the previous screen or exit a function.

4.1 പ്രധാന മെനു നാവിഗേഷൻ

From the main menu, you can select various diagnostic functions:

• Select Brand: For JOBD vehicles, select the specific Japanese vehicle manufacturer.
• OBDII System: Access standard OBDII/EOBD functions for all compliant vehicles.
• ടൂൾ സജ്ജീകരണം: Configure device settings such as language, contrast, and units of measurement.

4.2 Reading and Clearing Trouble Codes

1. From the main menu, select "OBDII System" or "Select Brand" (for JOBD).
2. Choose "Read Codes" to display current, pending, or permanent diagnostic trouble codes. The device will show the code and a brief description.
3. To clear codes, select "Erase Codes" from the menu. Confirm your selection when prompted. മുന്നറിയിപ്പ്: Clearing codes will also clear freeze frame data and reset I/M readiness monitors. Ensure you have addressed the underlying issue before clearing codes.

4.3 ലൈവ് ഡാറ്റ സ്ട്രീം

ഈ പ്രവർത്തനം നിങ്ങളെ അനുവദിക്കുന്നു view real-time operational data from the vehicle's sensors, such as engine RPM, vehicle speed, oxygen sensor readings, and coolant temperature. This data can be crucial for diagnosing intermittent problems.

1. From the OBDII System menu, select "Live Data".
2. Use the arrow buttons to scroll through the various data parameters.

4.4 Freeze Frame Data

When an emission-related fault occurs, the vehicle's computer stores a snapshot of operating conditions at that moment. This "freeze frame" data can help identify the conditions under which the fault occurred.

1. From the OBDII System menu, select "Freeze Frame".
2. Review the displayed parameters.

4.5 I/M സന്നദ്ധത നില

I/M Readiness indicates whether the various emission-related systems on the vehicle are operating correctly and have completed their diagnostic tests. This is often checked during vehicle inspections.

1. From the OBDII System menu, select "I/M Readiness".
2. The display will show the status of each monitor (e.g., "OK" or "INC" for incomplete).

4.6 വാഹന വിവരങ്ങൾ

This function allows you to retrieve the Vehicle Identification Number (VIN), Calibration ID (CIN), and Calibration Verification Number (CVN) from the vehicle's computer.

1. From the OBDII System menu, select "Vehicle Info".
2. The requested information will be displayed.

5. പരിപാലനം

5.1 സോഫ്റ്റ്‌വെയർ അപ്‌ഡേറ്റുകൾ

The Autophix OM127 supports software updates via the internet. Regularly updating the device ensures compatibility with newer vehicle models and access to the latest diagnostic features and bug fixes. Visit the official AUTOPHIX webഅപ്ഡേറ്റ് നിർദ്ദേശങ്ങൾക്കും സോഫ്റ്റ്‌വെയർ ഡൗൺലോഡുകൾക്കുമുള്ള സൈറ്റ്.

5.2 വൃത്തിയാക്കലും സംഭരണവും

• ഒരു സോഫ്റ്റ്, ഡി ഉപയോഗിച്ച് ഉപകരണം വൃത്തിയാക്കുകamp തുണി. ഉരച്ചിലുകളുള്ള ക്ലീനറുകളോ ലായകങ്ങളോ ഉപയോഗിക്കരുത്.
• Store the OM127 in its provided carry case in a dry, cool environment, away from direct sunlight and extreme temperatures.
• Ensure the OBD-II connector pins are clean and free from debris before connecting to a vehicle.

6. പ്രശ്‌നപരിഹാരം

• ഉപകരണം ഓണാകുന്നില്ല:
  • Ensure the OBD-II connector is securely plugged into the vehicle's port.
  • Verify the vehicle's ignition is in the "ON" position or the engine is running.
  • Check the vehicle's fuse for the OBD-II port (consult your vehicle's manual).
• "Link Error" or "Communication Error" Message:
  • Confirm the vehicle is OBDII compliant (generally 1996 and newer for US vehicles).
  • Ensure the ignition is "ON" or the engine is running.
  • Check for any bent or broken pins on the OM127's OBD-II connector or the vehicle's port.
  • Try connecting to a different OBDII compliant vehicle to rule out a vehicle-specific issue.
• കോഡുകൾ മായ്ക്കാൻ കഴിയില്ല:
  • Diagnostic Trouble Codes (DTCs) cannot be cleared if the underlying fault is still present. Address the issue causing the code first.
  • Ensure the ignition is "ON" (engine off) when attempting to clear codes.
• Slow Response or Freezing:
  • ഉപകരണം വിച്ഛേദിച്ച് വീണ്ടും ബന്ധിപ്പിക്കുക.
  • ഉപകരണ സോഫ്റ്റ്‌വെയർ കാലികമാണെന്ന് ഉറപ്പാക്കുക.

7 സ്പെസിഫിക്കേഷനുകൾ

ചിത്രം 4: Autophix OM127 Specifications Table. This image displays a table detailing the technical specifications of the OM127 device, including display type, operating temperature, storage temperature, external power requirements, and physical dimensions.

8. വാറൻ്റിയും പിന്തുണയും

8.1 വാറൻ്റി വിവരങ്ങൾ

The Autophix OM127 Code Reader comes with a one-year warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase for warranty claims.

8.2 Customer Support and Software Updates

For technical assistance, troubleshooting, or to download the latest software updates for your OM127 device, please visit the official AUTOPHIX webസൈറ്റ് ദി website provides detailed instructions and resources to ensure your device operates optimally.