BNT Solar Dummy Fake Camera Security Outdoor

ആമുഖം

This manual provides detailed instructions for the installation, operation, and maintenance of your BNT Solar Dummy Fake Camera. This device is designed to simulate a real security camera, providing a visual deterrent against potential intruders without the complexity or cost of a functional surveillance system. It features a realistic appearance, a flashing LED light, and is powered by solar energy with battery backup.

സുരക്ഷാ വിവരങ്ങൾ

• This product is a dummy camera and does not record video or provide actual surveillance.
• കുട്ടികൾക്ക് ലഭ്യമാകാതെ സൂക്ഷിക്കുക.
• Do not attempt to open or modify the device, as this may damage the product and void any implied warranty.
• Ensure proper installation to prevent the camera from falling, which could cause injury or damage.
• പ്രാദേശിക നിയന്ത്രണങ്ങൾ അനുസരിച്ച് ബാറ്ററികൾ ഉത്തരവാദിത്തത്തോടെ സംസ്കരിക്കുക.

പാക്കേജ് ഉള്ളടക്കം

എല്ലാ ഇനങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കാൻ പാക്കേജ് ഉള്ളടക്കങ്ങൾ പരിശോധിക്കുക:

• 1 x BNT Solar Dummy Fake Camera
• മൗണ്ടിംഗ് സ്ക്രൂകളും വാൾ പ്ലഗുകളും
• CCTV Sticker (optional, may vary by package)
• നിർദ്ദേശ മാനുവൽ (ഈ പ്രമാണം)

ഉൽപ്പന്നം കഴിഞ്ഞുview

The BNT Solar Dummy Fake Camera is designed to mimic the appearance of a functional security camera. Key components include:

• Dome Housing: Realistic camera dome with a simulated lens.
• മിന്നുന്ന ചുവന്ന LED: Indicates simulated operation, enhancing realism.
• സോളാർ പാനൽ: Charges the internal rechargeable batteries during daylight hours.
• ക്രമീകരിക്കാവുന്ന മൗണ്ടിംഗ് ബ്രാക്കറ്റ്: ഫ്ലെക്സിബിൾ പൊസിഷനിംഗും ആംഗിൾ ക്രമീകരണവും അനുവദിക്കുന്നു.
• ആന്റിന: Further enhance the realistic appearance of a wireless camera.

ചിത്രം: മുൻഭാഗം view of the BNT Solar Dummy Fake Camera, showing the dome, solar panel, and antennas.

Image: Diagram illustrating the dimensions of the dummy camera (approximately 9.06 inches height, 4.92 inches width) and a close-up of the simulated infrared LED lights within the dome.

സജ്ജമാക്കുക

1. ബാറ്ററി ഇൻസ്റ്റാളേഷൻ

The dummy camera requires 2 AA rechargeable batteries (not included) to power the flashing LED light. The solar panel will charge these batteries during daylight hours.

1. Gently unscrew the hemisphere (bottom part) of the camera to access the battery compartment.
2. Insert 2 AA rechargeable batteries into the battery compartment, ensuring correct polarity (+/-).
3. Carefully reattach and screw the hemisphere back onto the camera body.

ചിത്രം: പൊട്ടിത്തെറിച്ചു view showing the bottom hemisphere of the camera unscrewed, revealing the compartment for two AA rechargeable batteries.

Image: Illustration of the solar panel and the internal battery compartment, indicating that solar energy charges the rechargeable batteries.

2. ആന്റിന ഇൻസ്റ്റാൾ ചെയ്യുക

Screw the two provided antennas into the designated ports on the top of the camera body. These are for aesthetic purposes to enhance realism.

3. ക്യാമറ ഘടിപ്പിക്കുന്നു

The dummy camera can be mounted on walls, ceilings, or other flat surfaces using the included screws and wall plugs. Choose a location that receives ample sunlight for optimal solar charging and is visible for deterrence.

1. അനുയോജ്യമായ ഒരു മൗണ്ടിംഗ് സ്ഥലം തിരഞ്ഞെടുക്കുക.
2. Use the mounting bracket as a template to mark the drill holes on the surface.
3. Drill pilot holes and insert wall plugs if mounting into drywall or masonry.
4. നൽകിയിരിക്കുന്ന സ്ക്രൂകൾ ഉപയോഗിച്ച് മൗണ്ടിംഗ് ബ്രാക്കറ്റ് ഉപരിതലത്തിൽ ഉറപ്പിക്കുക.
5. Attach the dummy camera to the mounted bracket.
6. Adjust the camera angle as desired. The camera offers 180-degree adjustability.

Image: Diagram showing the dummy camera's mounting bracket allowing for 180-degree angle adjustment.

Image: Four-step visual guide for installation: unscrew hemisphere, put in batteries, install antenna, and mount to wall.

ശുപാർശ ചെയ്യുന്ന പ്ലെയ്‌സ്‌മെന്റ്

The dummy camera is suitable for both indoor and outdoor use. For outdoor placement, ensure the solar panel receives direct sunlight for optimal charging. Consider locations such as:

• Garage entrances
• മുൻ വാതിലുകൾ
• പിൻമുറ്റങ്ങൾ
• ഓഫീസ് കെട്ടിടങ്ങൾ
• ഷോപ്പിംഗ് മാളുകൾ
• വെയർഹൗസുകൾ

ചിത്രം: ഉദാamples of suitable installation locations including garage, office, backyard, front doors, shopping mall, and warehouse.

Image: Illustrates that the camera can be battery-powered for indoor use or solar + battery powered for outdoor use.

പ്രവർത്തിക്കുന്നു

The BNT Solar Dummy Fake Camera operates automatically once batteries are installed and it is exposed to light.

• മിന്നുന്ന LED: The red LED light will begin to flash, simulating the activity of a real surveillance camera. This flashing light is designed to be a visual deterrent.
• സോളാർ ചാർജിംഗ്: During daylight hours, the integrated solar panel will absorb sunlight and convert it into energy to recharge the installed AA batteries. This ensures continuous operation of the LED light, especially during nighttime.
• ബാറ്ററി പവർ: When there is insufficient sunlight, the camera will draw power directly from the installed AA batteries to keep the LED flashing.

Image: Close-up of the dummy camera highlighting the solar panel and its energy-saving function.

മെയിൻ്റനൻസ്

• വൃത്തിയാക്കൽ: Periodically wipe the camera's surface and solar panel with a soft, damp cloth to remove dust and dirt. Ensure the solar panel is clean for efficient charging. Do not use abrasive cleaners.
• ബാറ്ററി മാറ്റിസ്ഥാപിക്കൽ: If the flashing LED light becomes dim or stops flashing, it may be time to replace the rechargeable AA batteries. Follow the battery installation steps in the Setup section.
• കാലാവസ്ഥ പ്രതിരോധം: The camera is designed with an IP54 international protection rating, indicating resistance to dust and splashing water. While it is suitable for outdoor use, avoid submerging it in water or exposing it to extreme weather conditions beyond its rating.

Image: The dummy camera being sprayed with water, illustrating its IP54 (mislabelled as IP65 in image) water resistance for outdoor use.

ട്രബിൾഷൂട്ടിംഗ്

• LED not flashing:
  • Ensure rechargeable AA batteries are installed correctly and are not depleted. Replace if necessary.
  • Check if the solar panel is clean and receiving direct sunlight for charging.
• Camera appears unstable after mounting:
  • Verify that all mounting screws are tightened securely.
  • Ensure the mounting surface is sturdy and can support the camera's weight.
• Product appears damaged:
  • If the product arrived damaged, contact the retailer or manufacturer for assistance.

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റിയും പിന്തുണയും

For warranty information or technical support, please refer to the documentation provided with your purchase or contact BNT customer service directly. Contact details can typically be found on the product packaging or the official BNT webസൈറ്റ്.

സന്ദർശിക്കുക ആമസോണിലെ ബിഎൻടി സ്റ്റോർ കൂടുതൽ വിവരങ്ങൾക്ക്.