UGEARS വുൾഫ്-01 ഹാൻഡ്ഗൺ 3D വുഡൻ പസിൽ ഇൻസ്ട്രക്ഷൻ മാനുവൽ

1. ആമുഖം

The UGEARS Wolf-01 Handgun is a mechanical 3D wooden puzzle designed for assembly. This model functions as a rubber band shooter, offering an engaging building experience and interactive play. It is crafted from high-quality, laser-cut wooden pieces that fit together without the need for glue.

Image 1: The fully assembled UGEARS Wolf-01 Handgun model, shown alongside spare rubber bands and a small wooden part.

2 സുരക്ഷാ വിവരങ്ങൾ

• നേത്ര സംരക്ഷണം: Always wear protective eyewear (glasses) when operating the rubber band handgun to prevent eye injury.
• മേൽനോട്ടം: Adult supervision is recommended, especially for younger users, during both assembly and operation.
• Target Safely: Never aim the rubber band handgun at people, animals, or fragile objects. Use appropriate targets in a safe environment.
• ചെറിയ ഭാഗങ്ങൾ: This kit contains small parts that may pose a choking hazard for young children. Keep out of reach of children under 3 years old.
• ശരിയായ ഉപയോഗം: Use only the recommended rubber bands (60 x 1.5 mm caliber) with this model. Do not modify the model or use other projectiles.

Image 2: Detail of the model showing the engraved safety reminder: "USE ONLY WITH GLASSES!".

3. പാക്കേജ് ഉള്ളടക്കം

The UGEARS Wolf-01 Handgun kit includes:

• Laser-cut wooden sheets with all necessary parts.
• Rubber bands (60 x 1.5 mm caliber).
• Wax for lubricating moving parts.
• Detailed assembly instructions.

Image 3: The product packaging, indicating the contents of the kit.

4. അസംബ്ലി നിർദ്ദേശങ്ങൾ

Follow the step-by-step instructions provided in the kit for a smooth assembly experience. No glue is required; all parts are designed to interlock precisely. Assembly typically takes 60-90 minutes.

1. Carefully detach all wooden pieces from the sheets. Use fine sandpaper (not included) if necessary to smooth edges.
2. Refer to the illustrated manual for the correct sequence of assembly.
3. Apply wax to moving gears and connections as indicated in the instructions to ensure smooth operation.
4. അടുത്ത ഘട്ടത്തിലേക്ക് പോകുന്നതിന് മുമ്പ് എല്ലാ കണക്ഷനുകളും സുരക്ഷിതമാണെന്ന് ഉറപ്പാക്കുക.

Image 4: A person's hands in the process of assembling the wooden puzzle, demonstrating the interlocking pieces.

5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

5.1 Loading Rubber Bands

1. Ensure the safety mechanism is engaged (if applicable, refer to your specific model's instructions).
2. Place the rubber bands over the designated loading points on the top of the model, stretching them towards the front.
3. Secure each rubber band onto the front mechanism. The model can hold multiple rubber bands for sequential firing.

Image 5: A person's hands demonstrating how to load rubber bands onto the top of the handgun model.

5.2 Firing the Handgun

1. Point the handgun at a safe target, ensuring no people or animals are in the line of fire.
2. Disengage the safety mechanism.
3. Gently pull the trigger to release one rubber band. The mechanical action allows for rapid, sequential firing.

Image 6: A person holding the assembled handgun, demonstrating the firing stance.

5.3 Storage Compartment

The model features an integrated pull-down drawer in the handle, designed for storing extra rubber bands. To access, gently pull down the bottom part of the handle.

Image 7: The handgun with its handle compartment open, showing stored rubber bands.

5.4 ഔദ്യോഗിക ഉൽപ്പന്ന വീഡിയോ

Video 1: An official product video from UGEARS USA demonstrating the assembly and operation of the Wolf-01 Handgun.

6. പരിപാലനം

• ലൂബ്രിക്കേഷൻ: Periodically apply wax to moving parts, especially gears and sliding mechanisms, to maintain smooth operation.
• വൃത്തിയാക്കൽ: Wipe the wooden surfaces with a dry, soft cloth. Avoid using water or chemical cleaners, as they can damage the wood.
• സംഭരണം: Store the model in a dry environment away from direct sunlight and extreme temperature changes to prevent warping or damage to the wood.
• Rubber Band Replacement: Replace worn or broken rubber bands with new ones of the correct size (60 x 1.5 mm caliber) to ensure optimal performance.

7. പ്രശ്‌നപരിഹാരം

• ചേരാത്ത ഭാഗങ്ങൾ: If a wooden piece does not fit easily, do not force it. Check the instructions to ensure it is the correct piece and orientation. Lightly sand the edges if necessary.
• Stiff Mechanisms: If parts feel stiff or do not move smoothly, ensure adequate wax has been applied to all contact points as per the assembly instructions.
• Rubber Bands Not Firing: Check that the rubber bands are correctly loaded and seated on the firing mechanism. Ensure the trigger mechanism is fully reset.
• കേടായ ഭാഗങ്ങൾ: In case of damaged parts during assembly, refer to the manufacturer's support information for possible replacement options.

8 സ്പെസിഫിക്കേഷനുകൾ

9. വാറൻ്റിയും പിന്തുണയും

For warranty information, replacement parts, or additional support, please refer to the contact information provided in your product packaging or visit the official UGEARS webസൈറ്റ്. ഏതെങ്കിലും വാറന്റി ക്ലെയിമുകൾക്ക് നിങ്ങളുടെ വാങ്ങലിന്റെ തെളിവ് സൂക്ഷിക്കുക.