Bousnic Replacement Remote for P-Collar 320 and P-Collar 320B Dog Training Collars

1. ആമുഖം

This document serves as the instruction manual for the Bousnic Replacement Remote, designed for use with Bousnic P-Collar 320 and P-Collar 320B dog training receiver collars. This product includes only the remote control. Receiver collars, charging cables, and other accessories are not included and must be acquired separately if needed.

The remote features an intuitive LCD display and provides various training modes to assist in effective dog training.

Image: Bousnic Replacement Remote Control with LCD display.

2 സുരക്ഷാ വിവരങ്ങൾ

• പ്രധാന അറിയിപ്പ്: വിദൂര നിയന്ത്രണം വാട്ടർപ്രൂഫ് അല്ല. To prevent damage, keep it away from water and moisture.
• Ensure the remote is handled with care to avoid drops or impacts that could damage internal components.
• Store the remote in a safe place, out of reach of pets, to prevent chewing or damage.

3. സജ്ജീകരണം

The Bousnic Replacement Remote comes with a built-in Lithium Polymer battery. Before first use, it is recommended to fully charge the remote. A charging cable is not included with this replacement remote.

റിമോട്ട് ചാർജ് ചെയ്യുന്നു

1. Connect a compatible charging cable (not included) to the remote's charging port.
2. ചാർജിംഗ് കേബിളിന്റെ മറ്റേ അറ്റം ഒരു USB പവർ അഡാപ്റ്ററിലേക്കോ (ഉൾപ്പെടുത്തിയിട്ടില്ല) കമ്പ്യൂട്ടറിന്റെ USB പോർട്ടിലേക്കോ പ്ലഗ് ചെയ്യുക.
3. The battery indicator on the LCD display will show charging status. Once fully charged, disconnect the remote from the charger.

4. ജോടിയാക്കുന്നതിനുള്ള നിർദ്ദേശങ്ങൾ

To ensure proper functionality, the replacement remote must be paired with your existing Bousnic receiver collar. Follow these steps:

1. Turn on the remote and select the desired channel (e.g., channel 1 or 2).
2. Turn off the receiver collar by pressing and holding its power button until the red indicator light turns off.
3. Press and hold the receiver collar's power button for a few seconds until the green light on the receiver starts flashing. This indicates the receiver has entered pairing mode.
4. While the receiver's green light is flashing, press either the beep button or the vibration button on the remote.
5. Press the beep button or the vibration button again to confirm successful pairing. If paired correctly, you will hear a beep tone or feel a vibration from the receiver collar.

Image: Illustration of receiver collar modes (Beep, Vibration, Static Shock).

5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The Bousnic remote offers multiple training modes to suit your dog's needs. The LCD display shows the selected mode, intensity level, and battery status.

ലഭ്യമായ മോഡുകൾ:

• വൈബ്രേഷൻ മോഡ്: Delivers a gentle vibration to the receiver collar. The intensity can typically be adjusted.
• ബീപ് മോഡ്: Emits an audible tone from the receiver collar. This is often used as a warning or for positive reinforcement.
• സ്റ്റാറ്റിക് ഷോക്ക് മോഡ്: Provides a static stimulation. The intensity levels are adjustable to ensure humane training. Use this mode responsibly and at the lowest effective level.

Switching Modes and Adjusting Intensity:

Refer to the buttons on your remote for mode selection and intensity adjustment. Typically, there are dedicated buttons for each mode and up/down buttons to change intensity levels, which are displayed on the LCD screen.

Image: Bousnic remote control demonstrating a 1000 ft control range.

6. പരിപാലനം

• വൃത്തിയാക്കൽ: Wipe the remote with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
• സംഭരണം: Store the remote in a cool, dry place when not in use. Avoid extreme temperatures.
• ബാറ്ററി കെയർ: To prolong battery life, avoid fully discharging the remote frequently. Charge it regularly, especially if it will be stored for an extended period.

7. പ്രശ്‌നപരിഹാരം

റിമോട്ട് പ്രതികരിക്കുന്നില്ല:

• ബാറ്ററി പരിശോധിക്കുക: Ensure the remote's battery is sufficiently charged. Recharge if necessary.
• Wake Up Remote: Some remotes may enter a sleep mode to conserve battery. Press any button to wake it up before attempting to use a training function.

ജോടിയാക്കൽ പ്രശ്നങ്ങൾ:

• Repeat Pairing Steps: Carefully follow the pairing instructions in Section 4 again. Ensure the receiver collar is in pairing mode (green light flashing) when you press a function button on the remote.
• Check Receiver Battery: Ensure the receiver collar has sufficient battery power.
• സാമീപ്യം: Ensure the remote and receiver collar are close to each other during the pairing process.

8 സ്പെസിഫിക്കേഷനുകൾ

9. വാറൻ്റിയും പിന്തുണയും

For information regarding product warranty, returns, or technical support, please refer to the original product packaging or contact Bousnic customer service directly. Contact details can typically be found on the manufacturer's official webസൈറ്റ് അല്ലെങ്കിൽ നിങ്ങളുടെ വാങ്ങൽ പ്ലാറ്റ്‌ഫോം വഴി.