PUR PLUS 30-Cup Water Filter Dispenser User Manual

ആമുഖം

This manual provides essential instructions for the setup, operation, and maintenance of your PUR PLUS 30-Cup Water Filter Dispenser. Please read this guide thoroughly before using your dispenser to ensure proper function and longevity.

The PUR PLUS dispenser is designed to provide cleaner, great-tasting water by reducing lead, microplastics, and other chemical and physical substances from your tap water. It features a large 30-cup capacity, a slim design for refrigerator storage, and a filter change indicator light.

Image: The PUR PLUS 30-Cup Water Filter Dispenser, showing its clear reservoir, blue filter, and the product packaging in the background.

സജ്ജമാക്കുക

1. Unboxing and Initial Cleaning

Carefully remove all components from the packaging. The package includes one dispenser and one PUR PLUS filter.

Before first use, wash all parts of the dispenser (except the filter) with mild soap and water. The dispenser reservoir, lid, and handle are dishwasher safe. Rinse thoroughly.

Image: The disassembled PUR PLUS Water Filter Dispenser parts, including the reservoir and lid, placed in a dishwasher for cleaning.

2. Filter Preparation and Installation

1. Remove the PUR PLUS filter from its packaging.
2. Submerge the filter in cold water for 15 minutes to prime it. This helps remove air bubbles and ensures optimal filtration.
3. Insert the primed filter into the filter housing in the dispenser's upper reservoir. Twist the filter clockwise until it locks securely into place. The LockFit™ design ensures a tight seal, preventing unfiltered water from bypassing the filter.
4. Ensure the filter is fully seated to prevent leaks and ensure proper filtration.

Image: A hand demonstrating the insertion of a blue PUR PLUS water filter into the designated slot within the clear water dispenser reservoir.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

1. ഡിസ്പെൻസർ നിറയ്ക്കൽ

Open the lid of the dispenser. Fill the upper reservoir with cold tap water. The water will slowly filter through to the lower reservoir. Do not overfill past the maximum fill line.

2. വെള്ളം വിതരണം ചെയ്യുന്നു

To dispense filtered water, simply pull down the spout located at the front of the dispenser. Release the spout to stop the flow of water.

3. Filter Change Indicator Light

The dispenser is equipped with a smart indicator light to remind you when to replace the filter for optimal performance.

• ഗ്രീൻ ലൈറ്റ്: Filter is working correctly.
• മഞ്ഞ വെളിച്ചം: Change filter soon.
• ചുവന്ന വെളിച്ചം: Filter has reached the end of its life and needs immediate replacement.

Image: A close-up of the PUR PLUS water dispenser's filter change indicator light, illustrating the green (working), yellow (change soon), and red (end of life) states.

മെയിൻ്റനൻസ്

1. ഡിസ്പെൻസർ വൃത്തിയാക്കൽ

Regular cleaning of your dispenser is recommended. All parts, except the filter, are dishwasher safe. For manual cleaning, use mild soap and water, then rinse thoroughly. Avoid abrasive cleaners.

2. ഫിൽട്ടർ മാറ്റിസ്ഥാപിക്കൽ

Replace your PUR PLUS filter every 2 months or after filtering 40 gallons of water, whichever comes first. The filter indicator light will signal when a replacement is needed.

ഫിൽട്ടർ മാറ്റിസ്ഥാപിക്കാൻ:

1. Remove the old filter by twisting it counter-clockwise and pulling it out.
2. പഴയ ഫിൽട്ടർ ഉപേക്ഷിക്കുക.
3. Prepare and install a new PUR PLUS filter as described in the 'Setup' section.
4. After installing a new filter, reset the filter indicator light by pressing and holding the button on the indicator until it turns green.

Important: Always use genuine PUR PLUS filters. Compatible filters may not offer the same level of filtration and may not be certified to reduce lead and microplastics.

Image: A genuine PUR PLUS filter displayed alongside a warning against using generic, non-certified filters, emphasizing the importance of authentic replacement parts.

ട്രബിൾഷൂട്ടിംഗ്

• സ്ലോ ഫിൽട്രേഷൻ നിരക്ക്: The PUR PLUS dispenser uses gravity filtration, which can take time. A full reservoir may take up to an hour to filter. This is normal. If filtration becomes excessively slow, ensure the filter is properly primed and not clogged. A clogged filter indicates it's time for replacement.
• Water Tastes or Smells Unusual: This typically indicates that the filter needs to be replaced. Ensure you are using a genuine PUR PLUS filter and that it is correctly installed.
• Dispenser Leaks: Check that the filter is securely twisted into its housing. Ensure all parts of the dispenser are correctly assembled. Inspect the dispenser for any visible cracks or damage.
• Filter Indicator Light Not Working: Ensure the battery in the indicator is functional. If the light does not respond after pressing the reset button, contact customer support.

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റി വിവരങ്ങൾ

For specific warranty details regarding your PUR PLUS 30-Cup Water Filter Dispenser, please refer to the warranty card included with your product or visit the official PUR website. Warranty coverage typically addresses manufacturing defects under normal use conditions.

പിന്തുണ

If you have any questions, require assistance, or need to order replacement filters, please contact PUR customer support through their official webസൈറ്റ് അല്ലെങ്കിൽ ഉൽപ്പന്ന പാക്കേജിംഗിൽ നൽകിയിരിക്കുന്ന ബന്ധപ്പെടാനുള്ള വിവരങ്ങൾ.

കൂടുതൽ ഉറവിടങ്ങൾക്കും ഉൽപ്പന്ന വിവരങ്ങൾക്കും, സന്ദർശിക്കുക PUR Store on Amazon.