ആമുഖം
Thank you for choosing the AREBOS 2-in-1 Mechanic's Creeper and Seat. This versatile tool is designed to provide comfort and mobility for various tasks in your workshop or garage. Please read this manual thoroughly before use to ensure safe and efficient operation.
സുരക്ഷാ നിർദ്ദേശങ്ങൾ
- Always ensure the creeper/seat is on a flat, stable surface before use.
- Do not exceed the maximum load capacity: 150 kg (330 lbs) as a creeper, 120 kg (264 lbs) as a seat.
- Keep hands and fingers clear of moving parts during conversion between creeper and seat modes.
- Inspect the product for any damage or loose parts before each use. Do not use if damaged.
- Ensure all wheels are securely attached and functioning correctly.
- Use the parking brakes on the wheels when stability is required, especially when using as a seat.
- This product is intended for workshop use. Do not use for purposes other than its intended design.
- കുട്ടികളെയും വളർത്തുമൃഗങ്ങളെയും ജോലിസ്ഥലത്ത് നിന്ന് അകറ്റി നിർത്തുക.
ഘടകങ്ങൾ പൂർത്തിയായിview
The AREBOS 2-in-1 Mechanic's Creeper and Seat consists of the following main components:
- സ്റ്റീൽ ഫ്രെയിം: Provides structural integrity and durability.
- പാഡഡ് കുഷ്യനുകൾ: For comfort in both creeper and seat configurations.
- Swivel Casters (6x): 360-degree rotating wheels for easy maneuverability.
- Locking Pins/Mechanisms: For securing the creeper in either the flat (creeper) or folded (seat) position.

Image: The AREBOS 2-in-1 Mechanic's Creeper and Seat shown in both its flat creeper mode and folded seat mode, illustrating its dual functionality.
സജ്ജീകരണവും അസംബ്ലിയും
The AREBOS 2-in-1 Creeper and Seat typically comes pre-assembled or requires minimal setup. Follow these steps:
- അൺപാക്ക് ചെയ്യുന്നു: Carefully remove all components from the packaging. Check for any shipping damage.
- Wheel Installation (if required): If the wheels are not pre-installed, attach the six swivel casters to the designated points on the frame. Ensure they are securely fastened.
- പ്രാഥമിക പരിശോധന: Before first use, verify that all bolts, nuts, and pins are tight and secure. Ensure the frame is stable and there are no loose parts.

Image: A mechanic positioned under a vehicle, utilizing the AREBOS creeper for comfortable access during repairs.
പ്രവർത്തന നിർദ്ദേശങ്ങൾ
Converting from Creeper to Seat
- Ensure the creeper is on a flat, stable surface.
- Locate the locking pins or release mechanism on the frame, typically near the hinge points.
- Carefully disengage the locking mechanism.
- Gently lift the headrest section of the creeper upwards. The frame will begin to fold into a seat configuration.
- Continue folding until the seat position is fully engaged and the locking mechanism clicks into place, securing the seat. Verify it is stable before sitting.

Image: The AREBOS creeper transformed into a seat, demonstrating its robust design and capacity to support weight.
Converting from Seat to Creeper
- Ensure the seat is on a flat, stable surface.
- Locate and disengage the locking mechanism that holds the seat in its upright position.
- Carefully lower the backrest section until the creeper is fully flat.
- Ensure the locking pins are engaged to secure the creeper in the flat position.

ചിത്രം: വിശദമായ ഒരു ചിത്രം view of a hand engaging a locking pin on the creeper's steel frame, illustrating the mechanism for securing its position.
Using the Swivel Casters
The six 360-degree swivel casters allow for easy movement in any direction. Some casters may include a parking brake for added stability.
- To move the creeper/seat, simply push it in the desired direction.
- To lock the position, engage the parking brake on the relevant casters by pressing down the lever.
- To unlock, lift the lever.

ചിത്രം: വിശദമായ ഒരു ചിത്രം view of a 360-degree swivel wheel on the AREBOS creeper, showing the parking brake mechanism.
പരിപാലനവും പരിചരണവും
- വൃത്തിയാക്കൽ: Wipe down the padded surfaces and frame with a damp തുണി. മെറ്റീരിയലുകൾക്ക് കേടുപാടുകൾ വരുത്തുന്ന കഠിനമായ രാസവസ്തുക്കൾ ഒഴിവാക്കുക.
- ലൂബ്രിക്കേഷൻ: Periodically apply a small amount of lubricant to the swivel caster bearings and hinge points to ensure smooth operation.
- ഫാസ്റ്റനർ പരിശോധന: Regularly check all bolts, nuts, and locking pins for tightness. Tighten any loose fasteners to maintain structural integrity.
- സംഭരണം: Store the creeper/seat in a dry, clean environment when not in use. It can be stored in its compact seat configuration to save space.
ട്രബിൾഷൂട്ടിംഗ്
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| Difficulty converting between modes. | Locking pins are stuck or hinges are stiff. | Apply lubricant to hinge points and locking mechanisms. Ensure no debris is obstructing movement. |
| Creeper/Seat feels unstable. | Loose fasteners or damaged frame/wheels. | Check and tighten all bolts and nuts. Inspect frame and wheels for damage. Do not use if severely damaged. |
| Wheels do not swivel smoothly. | Dirt/debris in bearings or lack of lubrication. | Clean wheels and bearings. Apply lubricant to swivel points. |
| Parking brake not holding. | Brake mechanism worn or misaligned. | Inspect the brake mechanism. If worn, consider replacing the caster. |
സാങ്കേതിക സവിശേഷതകൾ
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| മോഡൽ | AR-HE-RM150 |
| ബ്രാൻഡ് | അരെബോസ് |
| ടൈപ്പ് ചെയ്യുക | 2-in-1 Mechanic's Creeper and Seat |
| Max. Load Capacity (Creeper) | 150 കി.ഗ്രാം (330 പൗണ്ട്) |
| Max. Load Capacity (Seat) | 120 കി.ഗ്രാം (264 പൗണ്ട്) |
| Dimensions (Creeper L x W x H) | 92 x 44 x 12 സെ.മീ (ഏകദേശം 36.2 x 17.3 x 4.7 ഇഞ്ച്) |
| Dimensions (Seat H x W x D) | Approx. 45 cm height (17.7 inches), 44 cm width (17.3 inches), 38 cm depth (15 inches) |
| ഭാരം | 5.3 കി.ഗ്രാം (11.7 പൗണ്ട്) |
| ചക്രങ്ങൾ | 6x 360° Swivel Casters |
| ഫ്രെയിം മെറ്റീരിയൽ | പൂശിയ സ്റ്റീൽ |

Image: A diagram illustrating the key dimensions of the AREBOS 2-in-1 Creeper and Seat in both its flat and folded states.
വാറൻ്റിയും പിന്തുണയും
For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official AREBOS webസൈറ്റ്. ഏതെങ്കിലും വാറന്റി ക്ലെയിമുകൾക്ക് നിങ്ങളുടെ വാങ്ങലിന്റെ തെളിവ് സൂക്ഷിക്കുക.





