Notifier DVC-EM Digital Voice Command Alarm System User Manual

1. ആമുഖം

The Notifier DVC-EM (Digital Voice Command with Extended Memory) is a critical component designed to integrate with compatible fire alarm and emergency communication systems. This module provides advanced digital voice command capabilities, enhancing the system's ability to deliver clear and effective audio messages during emergency situations. It is engineered for reliable performance within a comprehensive safety and security infrastructure.

2 സുരക്ഷാ വിവരങ്ങൾ

Please read and understand all safety instructions before installing or operating the DVC-EM module. This device is part of a life safety system and must be installed and maintained by qualified personnel in accordance with all local and national electrical codes and standards. Failure to follow these instructions may result in property damage, serious injury, or death.

• ഇലക്ട്രിക്കൽ സുരക്ഷ: Disconnect all power sources before installation or servicing to prevent electrical shock.
• ബാറ്ററി കൈകാര്യം ചെയ്യൽ: If applicable, use only specified battery types. Dispose of batteries according to local regulations.
• പ്രൊഫഷണൽ ഇൻസ്റ്റാളേഷൻ: Installation and configuration of this module should only be performed by trained and certified fire alarm technicians.
• സിസ്റ്റം അനുയോജ്യത: Ensure the DVC-EM is compatible with your existing fire alarm control panel and other system components.

3. പാക്കേജ് ഉള്ളടക്കം

Upon opening the package, verify that all components are present and undamaged. The standard package for the Notifier DVC-EM includes:

• One (1) Notifier DVC-EM Digital Voice Command module.
• Associated mounting hardware (if applicable, check specific product documentation).

The Notifier DVC-EM module is typically shipped in a protective cardboard box, as shown. Ensure the packaging is intact upon arrival.

The Notifier DVC-EM module, a circuit board component, is protected within an anti-static bag to prevent damage during transit and handling. Handle with care.

4. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

The Notifier DVC-EM module is designed for screw-in, wall-mount installation and operates wirelessly with battery power. Due to its integration into critical safety systems, professional installation is highly recommended.

4.1 മൗണ്ടിംഗ്

1. ലൊക്കേഷൻ തിരഞ്ഞെടുക്കുക: Choose a suitable wall location within the specified range of the main alarm panel, ensuring it is free from obstructions and environmental extremes.
2. സുരക്ഷിത മൗണ്ടിംഗ്: Use appropriate screws and anchors to securely mount the DVC-EM module to the wall. Refer to the detailed installation diagrams in the full technical manual for precise mounting points.

4.2 പവർ കണക്ഷൻ

1. ബാറ്ററി ഇൻസ്റ്റാളേഷൻ: Install the required batteries (type not specified in product data, refer to device labeling or full manual) into the designated battery compartment. Ensure correct polarity.
2. പവർ-അപ്പ് സീക്വൻസ്: Follow the specific power-up sequence outlined in the main system's installation manual to integrate the DVC-EM module.

4.3 വയർലെസ് കണക്റ്റിവിറ്റി

The DVC-EM utilizes wireless connectivity. Ensure the module is within the operational range of the main alarm system for proper communication. Configuration of wireless settings typically occurs via the main alarm control panel interface.

അടുത്ത് view of the Notifier DVC-EM module, still sealed in its protective anti-static packaging, highlighting its electronic components prior to installation.

5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The Notifier DVC-EM functions as a Digital Voice Command unit, primarily controlled via voice commands and integrated with the main alarm system. It is designed to issue alerts based on motion detection.

5.1 Voice Command Activation

The DVC-EM responds to pre-programmed voice commands issued through the connected alarm system. Specific commands and their functions are detailed in the main alarm system's user manual. Typically, these commands are used to:

• Initiate emergency messages.
• Broadcast pre-recorded instructions.
• Control specific zones or functions of the alarm system.

5.2 Motion-Activated Alerts

The DVC-EM is equipped with a photoelectric sensor for motion detection. When motion is detected within its operational range (up to 100 ft), the module can trigger an alert, which may include an 85dB alarm sound, depending on system configuration. The system's response to motion detection is configurable via the main control panel.

6. പരിപാലനം

Regular maintenance ensures the optimal performance and longevity of your Notifier DVC-EM module. Perform these checks periodically:

• ബാറ്ററി പരിശോധന: As a battery-powered device, regularly check the battery status. Replace batteries as indicated by the main alarm system's low battery warnings or as recommended by the manufacturer.
• വൃത്തിയാക്കൽ: Gently clean the exterior of the module with a soft, dry cloth to remove dust and debris. Do not use liquid cleaners or solvents. Ensure the photoelectric sensor is clear of obstructions.
• സിസ്റ്റം ടെസ്റ്റ്: Periodically test the entire alarm system, including the DVC-EM's voice command and motion detection functions, according to the main system's testing procedures.

7. പ്രശ്‌നപരിഹാരം

If you encounter issues with your Notifier DVC-EM, consider the following troubleshooting steps. For complex problems, contact a qualified fire alarm technician.

• വൈദ്യുതിയില്ല/പ്രതികരണമില്ല: Check battery installation and charge level. Ensure the module is properly connected to the main system.
• Voice Commands Not Recognized: Verify that the DVC-EM is within wireless range of the main control panel. Check the main system's configuration for voice command settings.
• തെറ്റായ ചലന മുന്നറിയിപ്പുകൾ: Ensure the photoelectric sensor is clean and free from obstructions. Review the installation location for potential sources of false triggers (e.g., drafts, direct sunlight, moving objects).
• No Alarm Sound: Confirm the 85dB alarm function is enabled in the main system's configuration. Check for any system faults reported by the main control panel.

8 സ്പെസിഫിക്കേഷനുകൾ

9. വാറൻ്റി വിവരങ്ങൾ

Specific warranty details for the Notifier DVC-EM module are not provided in the available product information. Please refer to the official Notifier webസമഗ്രമായ വാറന്റി നിബന്ധനകൾക്കും വ്യവസ്ഥകൾക്കും സൈറ്റിൽ ബന്ധപ്പെടുക അല്ലെങ്കിൽ അവരുടെ ഉപഭോക്തൃ പിന്തുണയുമായി ബന്ധപ്പെടുക.

10. പിന്തുണ

For technical assistance, product inquiries, or support regarding your Notifier DVC-EM Digital Voice Command module, please contact Notifier's dedicated customer service team. They are equipped to help with any questions regarding products and orders.

ബന്ധപ്പെടാനുള്ള വിവരങ്ങൾ: Refer to the official Notifier webസൈറ്റ് (www.notifier.com) for the most current support contact details, including phone numbers and email addresses.