AVANTEK Wireless Doorbell CW-12 User Manual

1. ആമുഖം

This manual provides detailed instructions for the installation, operation, and maintenance of your AVANTEK Wireless Doorbell CW-12. Please read this manual thoroughly before using the product to ensure proper function and longevity. This wireless doorbell system offers convenience and reliability for your home or office.

2. പാക്കേജ് ഉള്ളടക്കം

പായ്ക്ക് ചെയ്യുമ്പോൾ, താഴെ ലിസ്റ്റ് ചെയ്തിരിക്കുന്ന എല്ലാ ഇനങ്ങളും നിങ്ങളുടെ പാക്കേജിൽ ഉൾപ്പെടുത്തിയിട്ടുണ്ടെന്ന് ദയവായി പരിശോധിക്കുക:

• 1 × Transmitter (Doorbell Push Button)
• 2 × Plug-in Receivers (Chime Units)
• 1 × Adhesive Tape for Transmitter Mounting
• 2 × Screws for Transmitter Mounting
• 2 × Anchors for Transmitter Mounting
• 1 × സ്ക്രൂഡ്രൈവർ
• 1 × ഉപയോക്തൃ മാനുവൽ

3. ഉൽപ്പന്ന സവിശേഷതകൾ

• 1000 ft (300 m) Ultra-Long Wireless Range: Ensures you never miss a visitor, even if you are a few rooms away or on another floor.
• 52 Chimes and Melodies: Choose from a wide selection of sounds with a 1.1 inch (29 mm) stereo speaker for rich, crisp audio.
• 5 ക്രമീകരിക്കാവുന്ന വോളിയം ലെവലുകൾ: Customize the sound level up to a maximum of 115 dB.
• LED ഫ്ലാഷ് സൂചകം: Provides a visual alert, useful for noisy environments or for individuals with hearing impairments.
• IP55 Dustproof and Waterproof Transmitter: Designed to withstand various harsh weather conditions, operating effectively from -4 °F to 140 °F (-20 °C to 60 °C).
• മെമ്മറി പ്രവർത്തനം: Remembers your last melody and volume level after a power outage, eliminating the need to reset settings.
• കോം‌പാക്റ്റ് റിസീവർ ഡിസൈൻ: The mini plug-in receivers are designed not to block adjacent power sockets.
• വികസിപ്പിക്കാവുന്ന സിസ്റ്റം: Easily add more AVANTEK CR-1/RB-1 plug-in receivers for increased coverage.

4. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

4.1. റിസീവർ സജ്ജീകരണം

1. Plug the receiver into a standard electrical outlet. The LED on the receiver will flash, indicating it is powered on.

4.2. Transmitter Setup and Installation

The transmitter (push button) can be installed using either the adhesive tape or screws and anchors.

Method A: Using Adhesive Tape

1. Clean the desired installation area thoroughly to ensure it is free of dust and moisture.
2. Remove the protective film from one side of the adhesive tape and attach it to the back of the transmitter.
3. Remove the protective film from the other side of the adhesive tape.
4. Firmly press the transmitter onto the cleaned surface for at least 30 seconds.

Method B: Using Screws and Anchors

1. Open the transmitter cover by inserting the provided key into the grooved slot and gently prying it open.
2. Mark the positions for drilling holes on the wall using the back plate of the transmitter as a template.
3. Drill two holes at the marked positions. Insert the anchors into the holes.
4. Secure the back plate of the transmitter to the wall using the provided screws.
5. Snap the transmitter cover back onto the secured back plate.

5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

5.1. മാറ്റുന്ന ഈണങ്ങൾ

To select a melody, press the 'Next' or 'Previous' button on the side of the receiver. There are 52 melodies available. Once you find your desired melody, it will be saved automatically.

5.2. വോളിയം ക്രമീകരിക്കുന്നു

Press the 'Volume' button on the side of the receiver to cycle through 5 adjustable volume levels. Select the volume level that best suits your needs.

5.3. സൈലൻ്റ് മോഡ്

To activate silent mode, repeatedly press the 'Volume' button until the volume indicator shows the lowest setting or is muted. In silent mode, the LED indicator will still flash when the doorbell is pressed, providing a visual alert without sound.

5.4. ട്രാൻസ്മിറ്ററും റിസീവറും ജോടിയാക്കുന്നു

Your doorbell system comes pre-paired. If you need to re-pair or add additional transmitters/receivers:

1. റിസീവർ ഒരു പവർ സോക്കറ്റിൽ പ്ലഗ് ചെയ്യുക.
2. Press and hold the 'Volume' button on the receiver for 3 seconds until the LED flashes rapidly. This indicates pairing mode.
3. Immediately press the push button on the transmitter. The receiver will chime once, and its LED will flash simultaneously with the transmitter's LED, indicating successful pairing.
4. Repeat the process for any additional transmitters or receivers.

6. പരിപാലനം

6.1. ബാറ്ററി മാറ്റിസ്ഥാപിക്കൽ (ട്രാൻസ്മിറ്റർ)

The transmitter uses a CR2032 lithium battery, which typically lasts up to 3 years. To replace the battery:

1. Insert the provided key or a small flat-head screwdriver into the grooved slot on the side of the transmitter.
2. Gently pry open the rear cover of the transmitter.
3. പഴയ CR2032 ബാറ്ററി ശ്രദ്ധാപൂർവ്വം നീക്കം ചെയ്യുക.
4. Insert a new CR2032 battery, ensuring the positive (+) side is facing up.
5. Snap the rear cover back into place until it clicks securely.

7. പ്രശ്‌നപരിഹാരം

• റിസീവറിൽ നിന്ന് ശബ്ദമില്ല: Ensure the receiver is properly plugged into a working power outlet. Check the volume level and ensure it is not set to silent mode. Re-pair the transmitter and receiver if necessary.
• Transmitter Not Working: Verify the battery in the transmitter is correctly installed and has sufficient charge. Replace the CR2032 battery if needed. Ensure the transmitter is within the 1000 ft wireless range of the receiver.
• ഇടപെടൽ: Avoid installing the transmitter close to or on metal surfaces (e.g., metal door frames, metal mailboxes) as this can interfere with the wireless signal. Large metal objects or thick walls can reduce the effective range.
• ഹ്രസ്വ പരിധി: Obstacles such as thick walls, metal structures, or other wireless devices can reduce the operating range. Try relocating the receiver or transmitter to a different position.

8 സ്പെസിഫിക്കേഷനുകൾ

9. വാറൻ്റിയും പിന്തുണയും

AVANTEK is committed to providing high-quality products and customer satisfaction. Our wireless doorbell is approved by FCC, CE, and RoHS standards. We offer dedicated customer service and will always do our best to support you with any inquiries or issues.

For further assistance or warranty claims, please refer to the contact information provided on the AVANTEK official webസൈറ്റ് അല്ലെങ്കിൽ നിങ്ങളുടെ വാങ്ങൽ ഡോക്യുമെന്റേഷൻ.