Littelfuse FLNR045

ഇൻസ്ട്രക്ഷൻ മാനുവൽ

Littelfuse FLNR045 FUS 250V T/D Class RK5 45A

1. ആമുഖം

This manual provides essential information for the safe and effective use of the Littelfuse FLNR045 FUS 250V T/D Class RK5 45A fuse. Please read this manual thoroughly before installation or operation and retain it for future reference. This fuse is designed for use in panel accessories and electrical systems requiring reliable overcurrent protection.

2 സുരക്ഷാ വിവരങ്ങൾ

മുന്നറിയിപ്പ്: Electrical shock hazard. Improper installation or use of this product can result in serious injury or death. Always follow local electrical codes and safety regulations.

3. ഉൽപ്പന്ന വിവരണവും സവിശേഷതകളും

The Littelfuse FLNR045 is a 45 Amp, 250 Volt, Class RK5, dual-element, time-delay fuse. It is designed to provide superior protection for motors and other inductive loads against both overloads and short-circuits. Its time-delay characteristic allows for temporary inrush currents without nuisance opening, while still providing fast-acting protection under short-circuit conditions.

Littelfuse FLNR045 Class RK5 Time-Delay Fuse

Figure 3.1: A Littelfuse FLNR045 Class RK5 time-delay fuse. This image shows the cylindrical body of the fuse with the Littelfuse brand and "CLASS RK5 Time Delay Dual Element" visible on its label.

പ്രധാന സവിശേഷതകൾ:

4. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

Installation of the FLNR045 fuse should only be performed by a qualified electrician in accordance with all applicable national and local electrical codes.

  1. സർക്യൂട്ട് ഡീ-എനർജൈസ് ചെയ്യുക: Before beginning any work, ensure that the circuit where the fuse is to be installed or replaced is completely de-energized. Verify with a voltagഇ ടെസ്റ്റർ.
  2. ഫ്യൂസ് ഹോൾഡർ തിരിച്ചറിയുക: Locate the appropriate fuse holder or disconnect switch for the circuit requiring protection.
  3. ഫ്യൂസ് ചേർക്കുക: Carefully insert the FLNR045 fuse into the fuse clips or holder, ensuring a secure and proper connection. Do not force the fuse.
  4. ഇൻസ്റ്റാളേഷൻ പരിശോധിക്കുക: Double-check that the fuse is seated correctly and that all connections are tight.
  5. Re-energize Circuit: ഇൻസ്റ്റാളേഷൻ പൂർത്തിയായി പരിശോധിച്ചുറപ്പിച്ചുകഴിഞ്ഞാൽ, സർക്യൂട്ടിലേക്ക് പവർ പുനഃസ്ഥാപിക്കുക.

It is critical to match the fuse's voltagഇ കൂടാതെ amperage ratings to the circuit's requirements. Using a fuse with an incorrect rating can lead to system failure or hazardous conditions.

5. പ്രവർത്തന തത്വങ്ങൾ

The Littelfuse FLNR045 is a current-limiting, time-delay fuse. This means it is designed to:

The time-delay feature is particularly beneficial in circuits with inductive loads that draw high inrush currents upon startup, preventing unnecessary fuse blows and ensuring continuous operation.

6. പരിപാലനം

Fuses are generally maintenance-free components. However, periodic inspection of the fuse and its holder is recommended as part of routine electrical system maintenance.

7. പ്രശ്‌നപരിഹാരം

If a circuit protected by the FLNR045 fuse loses power, the fuse may have blown due to an overcurrent condition. Follow these steps:

  1. സർക്യൂട്ട് ഡീ-എനർജൈസ് ചെയ്യുക: Immediately disconnect power to the affected circuit at the main panel.
  2. ഊതപ്പെട്ട ഫ്യൂസ് തിരിച്ചറിയുക: Carefully remove the fuse (using appropriate tools if necessary) and test it with a multimeter for continuity. A blown fuse will show an open circuit (no continuity).
  3. Investigate Cause: Before replacing the fuse, identify and rectify the cause of the overcurrent. Common causes include:
    • Short-circuit in wiring or equipment.
    • Overloaded circuit (too many devices drawing power).
    • Faulty appliance or motor.
  4. ഫ്യൂസ് മാറ്റിസ്ഥാപിക്കുക: Once the fault is cleared, replace the blown fuse with a new Littelfuse FLNR045 fuse. Ensure the replacement fuse has the exact same ratings.
  5. Re-energize and Monitor: Restore power and monitor the circuit for proper operation. If the new fuse blows immediately, there is still an unresolved issue in the circuit that requires professional attention.

Do not repeatedly replace fuses without addressing the underlying problem, as this can lead to serious electrical hazards.

8 സ്പെസിഫിക്കേഷനുകൾ

സ്പെസിഫിക്കേഷൻമൂല്യം
മോഡൽ നമ്പർFLNR045
ബ്രാൻഡ്ലിറ്റൽഫ്യൂസ്
വാല്യംtagഇ റേറ്റിംഗ്250 വോൾട്ട് എസി
Ampഇറേജ് റേറ്റിംഗ്45 Amps
ഫ്യൂസ് ക്ലാസ്RK5
സ്വഭാവംTime-Delay, Dual-Element
മെറ്റീരിയൽStone (Insulating Body)
പാലിക്കൽUL ലിസ്‌റ്റുചെയ്‌തു
വിഭാഗംPanel Accessories, Fuse

9. വാറൻ്റിയും പിന്തുണയും

For information regarding warranty, technical support, or service for your Littelfuse FLNR045 fuse, please contact Littelfuse directly through their official webസൈറ്റ് അല്ലെങ്കിൽ ഉപഭോക്തൃ സേവന ചാനലുകൾ. ഏതെങ്കിലും വാറന്റി ക്ലെയിമുകൾക്കായി നിങ്ങളുടെ വാങ്ങൽ രസീത് സൂക്ഷിക്കുക.

Littelfuse Official Webസൈറ്റ്: www.littelfuse.com

അനുബന്ധ രേഖകൾ - FLNR045

പ്രീview Littelfuse JLLN Series Class T Fuses | Fast-Acting, High Interrupting Capacity
Explore Littelfuse JLLN Series Class T fuses, offering compact design, fast-acting overload and short-circuit protection, and high interrupting ratings up to 200,000 AIR. Ideal for drives, inverters, and power supplies. View specifications, ordering information, and dimensions.
പ്രീview ലിറ്റൽഫ്യൂസ് P6SMB സീരീസ് 600W സർഫേസ് മൗണ്ട് ടിവിഎസ് ഡയോഡുകൾ ഡാറ്റാഷീറ്റ്
ലിറ്റൽഫ്യൂസ് P6SMB സീരീസ് 600W സർഫേസ് മൗണ്ട് ട്രാൻസിയന്റ് വോള്യത്തിനായുള്ള ഡാറ്റാഷീറ്റ്tagഇ സപ്രസ്സർ (ടിവിഎസ്) ഡയോഡുകൾ. സവിശേഷതകൾ, ഗുണങ്ങൾ, ഇലക്ട്രിക്കൽ സവിശേഷതകൾ, റേറ്റിംഗുകൾ, കർവുകൾ, സോളിഡിംഗ് പാരാമീറ്ററുകൾ, ഭൗതികവും പാരിസ്ഥിതികവുമായ സവിശേഷതകൾ, പാർട്ട് നമ്പറിംഗ് വിവരങ്ങൾ എന്നിവ ഉൾപ്പെടുന്നു.
പ്രീview CT Turns Ratio Modification Guide: Littelfuse Technical Note
Learn how to modify the turns ratio of Littelfuse current transformers (CTs) with this technical note, including methods for adding and subtracting turns, and practical examples. Understand the principles of CT operation and ratio adjustments.
പ്രീview PTS526 Series Microminiature SMT Top Actuated Tactile Switch Datasheet
Datasheet for the Littelfuse PTS526 Series microminiature SMT top-actuated tactile switch. Features a 5.2 x 5.2 mm footprint, variable heights, and multiple actuation forces, suitable for IoT, home automation, and remote control applications. Includes detailed specifications, mechanical characteristics, dimensions, and ordering information.
പ്രീview Ground-Fault Monitoring in Adjustable-Speed Drive Applications | Littelfuse Technical Note
Technical note from Littelfuse on ground-fault monitoring for adjustable-speed drives (VFDs) using SE-700 and EL731 series relays. Covers issues, filtering, recommended settings, and current transformer location for resistance-grounded systems.
പ്രീview Littelfuse 55505 Series Hall Effect Geartooth Speed Sensor Datasheet
Datasheet for the Littelfuse 55505 Series Hall Effect Flange Mount Geartooth Speed Sensor, detailing its features, applications, electrical ratings, and part numbering system for industrial, commercial, and automotive use.