1. ആമുഖം
This manual provides comprehensive instructions for the safe installation, operation, and maintenance of your V-TAC VT-702 GU10 Shower Fire Rated Downlight Fitting. Please read this manual thoroughly before installation and retain it for future reference. This product is designed for indoor use, specifically in areas requiring IP65 and fire-rated protection, such as bathrooms and kitchens.
2 സുരക്ഷാ വിവരങ്ങൾ
- ഇലക്ട്രിക്കൽ ഇൻസ്റ്റാളേഷൻ: Installation must be carried out by a qualified electrician in accordance with all local and national wiring regulations.
- വൈദ്യുതി വിച്ഛേദിക്കൽ: Always ensure the main power supply is switched off at the consumer unit/fuse box before commencing any installation, maintenance, or repair work.
- ഉൽപ്പന്ന സമഗ്രത: Do not modify or alter the product in any way. Any modifications will void the warranty and may pose a safety risk.
- ഫയർ റേറ്റിംഗ്: This downlight is fire-rated for 90 minutes. Ensure proper installation to maintain its fire integrity. Do not remove or damage the fire-rated components.
- IP65 റേറ്റിംഗ്: The IP65 rating signifies protection against dust ingress and low-pressure water jets from any direction. This makes it suitable for bathroom zones 1 and 2. Ensure all seals are correctly seated during installation to maintain this rating.
- ബൾബ് അനുയോജ്യത: Use only GU10 LED bulbs. Ensure the bulb's wattage does not exceed the maximum specified for the fitting (check bulb manufacturer's specifications). Bulbs are not included.
- ചൂട്: Allow the fitting and bulb to cool down before handling or replacing the bulb.
3. ഉൽപ്പന്നം കഴിഞ്ഞുview
The V-TAC VT-702 is a high-quality, fire-rated, and IP65-rated downlight fitting designed for recessed installation. It features a satin nickel finish and is compatible with standard GU10 LED bulbs.
ചിത്രം 3.1: ഓവർview of the V-TAC VT-702 GU10 Downlight Fitting in satin nickel finish.
Figure 3.2: The downlight is fire-rated for 90 minutes, providing enhanced safety and compliance with building regulations. It includes air leak protection for fire safety.
Figure 3.3: Key dimensions of the GU10 fixed fire-rated downlight fitting. The cutting size required for installation is Ø65mm, with an overall diameter of Ø86mm and a height of 115mm.
Figure 3.4: The downlight features quick connectors for loop-in loop-out wiring, ensuring quicker and safer installation. Robust spring clips are provided for secure mounting in the ceiling.
Figure 3.5: The V-TAC VT-702 boasts an IP65 rating, making it water-resistant and protected against dust and low-pressure water jets. This makes it suitable for use in bathrooms and other damp പരിസരങ്ങൾ.
Figure 3.6: The downlight is compatible with any standard GU10 lamp. Please note that bulbs are not included with the fitting and must be purchased separately.
4. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
പ്രധാനപ്പെട്ടത്: Installation should only be performed by a qualified electrician.
- തയ്യാറാക്കൽ: Ensure the main power supply to the circuit where the downlight will be installed is switched off at the consumer unit/fuse box.
- സീലിംഗ് കട്ട് ഔട്ട്: Using a suitable hole saw, create a circular cut-out in the ceiling with a diameter of Ø65mm. Ensure there is sufficient clear space above the ceiling for the fitting and wiring, respecting fire safety regulations and insulation requirements.
- വയറിംഗ്: Connect the electrical supply cables to the quick connectors provided on the downlight fitting. Ensure correct polarity (Live, Neutral, Earth) and secure all connections. The quick connectors facilitate loop-in loop-out wiring.
- ബൾബ് ചേർക്കൽ: Insert a GU10 LED bulb (not included) into the lamp holder of the downlight fitting.
- മൗണ്ടിംഗ്: Fold back the spring clips on the sides of the downlight fitting. Carefully push the fitting into the prepared ceiling cut-out. The spring clips will automatically expand and secure the fitting firmly in place against the ceiling.
- അന്തിമ പരിശോധന: Ensure the fitting is securely seated and flush with the ceiling surface.
- വൈദ്യുതി പുനഃസ്ഥാപിക്കൽ: Restore power to the circuit at the consumer unit/fuse box and test the downlight.
5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ
The V-TAC VT-702 downlight operates via a standard wall switch connected to its electrical circuit. Once installed and wired correctly, simply toggle the wall switch to turn the light on or off.
- Ensure a compatible GU10 LED bulb is correctly inserted into the fitting.
- The fitting is designed for continuous use within its specified voltagഇ ശ്രേണി (220 വോൾട്ട്).
6. പരിപാലനം
Regular maintenance will ensure the longevity and optimal performance of your downlight fitting.
- വൃത്തിയാക്കൽ: Disconnect power before cleaning. Wipe the fitting with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the finish. For stubborn marks, a slightly damp cloth can be used, ensuring no moisture enters the electrical components.
- ബൾബ് മാറ്റിസ്ഥാപിക്കൽ:
- Switch off the power supply to the downlight at the main consumer unit/fuse box.
- ബൾബ് ഉപയോഗിച്ചിട്ടുണ്ടെങ്കിൽ അത് പൂർണ്ണമായും തണുക്കാൻ അനുവദിക്കുക.
- Carefully remove the old GU10 bulb by twisting it counter-clockwise.
- Insert the new GU10 LED bulb by aligning the pins with the lamp holder slots and twisting clockwise until secure.
- പവർ പുനഃസ്ഥാപിച്ച് പുതിയ ബൾബ് പരിശോധിക്കുക.
- പരിശോധന: Periodically inspect the fitting for any signs of damage or wear. If any damage is observed, disconnect power and consult a qualified electrician.
7. പ്രശ്നപരിഹാരം
If your V-TAC VT-702 downlight is not functioning correctly, please refer to the following common issues and solutions:
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| ലൈറ്റ് ഓണാക്കില്ല. | വൈദ്യുതി വിതരണം ഇല്ല. കേടായ ബൾബ്. അയഞ്ഞ വയറിംഗ് കണക്ഷൻ. | Check if the main power switch is on. സർക്യൂട്ട് ബ്രേക്കർ തകരാറിലാണോയെന്ന് പരിശോധിക്കുക. Replace the GU10 bulb. (For loose wiring) Disconnect power and have a qualified electrician check the connections. |
| ലൈറ്റ് മിന്നുന്നു. | പൊരുത്തപ്പെടാത്ത ബൾബ്. ലൂസ് ബൾബ് കണക്ഷൻ. വാല്യംtagഇ ഏറ്റക്കുറച്ചിലുകൾ. | Ensure you are using a compatible GU10 LED bulb. Ensure the bulb is securely twisted into the lamp ഹോൾഡർ. വോളിയം ആണെങ്കിൽ ഒരു ഇലക്ട്രീഷ്യനെ സമീപിക്കുകtagഇ പ്രശ്നങ്ങൾ സംശയിക്കുന്നു. |
| Fitting is hot to touch. | ഓവർ-വാട്ട്tagഇ ബൾബ്. വേണ്ടത്ര വായുസഞ്ചാരം. | ബൾബ് വാട്ട് ഉറപ്പാക്കുകtage does not exceed the recommended maximum for the fitting. Ensure proper air circulation around the fitting in the ceiling void. |
If the problem persists after attempting these solutions, please contact a qualified electrician or V-TAC customer support.
8 സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| ബ്രാൻഡ് | വി-ടിഎസി |
| മോഡൽ നമ്പർ | VT-702 |
| ഭാഗം നമ്പർ | 3683 |
| ടൈപ്പ് ചെയ്യുക | GU10 Recessed Downlight Fitting |
| നിറം | Nickel (Satin Finish) |
| മെറ്റീരിയൽ | Nickel / Alloy Steel |
| വാല്യംtage | 220 വോൾട്ട് |
| IP റേറ്റിംഗ് | IP65 (ജല പ്രതിരോധം) |
| ഫയർ റേറ്റിംഗ് | 90 Minutes Fire Rated |
| മുറിക്കുന്ന വലിപ്പം | Ø65mm |
| മൊത്തത്തിലുള്ള വ്യാസം | Ø86mm |
| ഉയരം | 115 മി.മീ |
| ബൾബ് തരം | GU10 (ബൾബ് ഉൾപ്പെടുത്തിയിട്ടില്ല) |
| ഉൾപ്പെടുത്തിയ ഘടകങ്ങൾ | Mounting Hardware, Screws |
| ഇനത്തിൻ്റെ ഭാരം | 250 ഗ്രാം |
9. വാറൻ്റിയും പിന്തുണയും
For warranty information, please refer to the terms and conditions provided by your retailer at the time of purchase. V-TAC products typically come with a manufacturer's warranty against defects in materials and workmanship.
For technical support or further assistance, please contact V-TAC customer service or visit their official website. You can find more information about V-TAC products at the V-TAC Store on Amazon.
