CONTEC CMS50NA

CONTEC CMS50NA പൾസ് ഓക്സിമീറ്റർ ഉപയോക്തൃ മാനുവൽ

Model: CMS50NA | Brand: CONTEC

1. ആമുഖം

The CONTEC CMS50NA Pulse Oximeter is a portable device designed for non-invasive spot-check measurement of oxygen saturation of arterial hemoglobin (SpO2) and pulse rate. It is intended for sports and aviation use only and is not a medical device. This manual provides essential information for the safe and effective operation of the device.

പ്രധാന കുറിപ്പ്: This product is intended for sports and aviation use only. It is not a medical device and should not be used for diagnosis or treatment of any medical condition.

2. എന്താണ് ഉൾപ്പെടുത്തിയിരിക്കുന്നത്

പാക്കേജ് തുറക്കുമ്പോൾ, എല്ലാ ഘടകങ്ങളും അവിടെ ഉണ്ടെന്ന് ഉറപ്പാക്കുക:

  • CONTEC CMS50NA Pulse Oximeter (1 unit)
  • Handy Carry Pouch (1 unit)
  • 1.5V AAA Alkaline Batteries (2 units)
  • Long Lanyard (Neck/Wrist Cord) (1 unit)
  • ഉപയോക്തൃ മാനുവൽ (1 യൂണിറ്റ്)
Contents of CONTEC CMS50NA Pulse Oximeter package

Image: All items included in the CONTEC CMS50NA Pulse Oximeter package, including the oximeter, carry pouch, batteries, lanyard, and user manual.

3. സജ്ജീകരണം

3.1 ബാറ്ററി ഇൻസ്റ്റാളേഷൻ

  1. Open the battery cover on the back of the device by sliding it downwards.
  2. Insert two 1.5V AAA alkaline batteries into the battery compartment, ensuring the positive (+) and negative (-) terminals align correctly with the indicators inside the compartment.
  3. സുരക്ഷിതമായി ക്ലിക്ക് ചെയ്യുന്നത് വരെ ബാറ്ററി കവർ തിരികെ അതിന്റെ സ്ഥാനത്തേക്ക് സ്ലൈഡ് ചെയ്ത് അടയ്ക്കുക.
Battery compartment of CONTEC CMS50NA Pulse Oximeter

Image: The open battery compartment of the pulse oximeter, showing where to insert the two AAA batteries.

3.2 ലാനിയാർഡ് ഘടിപ്പിക്കൽ

  1. Thread the thinner end of the lanyard through the lanyard loop hole located on the side of the oximeter.
  2. Pass the thicker end of the lanyard through the looped thinner end and pull gently to secure.
Steps to attach lanyard to CONTEC CMS50NA Pulse Oximeter

Image: A visual guide demonstrating the three steps to correctly attach the neck/wrist lanyard to the pulse oximeter.

4. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

4.1 ഒരു അളവ് എടുക്കുന്നു

  1. പൾസ് ഓക്സിമീറ്ററിന്റെ ക്ലിപ്പ് തുറക്കുക.
  2. Insert one of your fingers (preferably the index or middle finger) into the rubber opening of the oximeter, ensuring it is placed correctly.
  3. Press the power button on the top of the device.
  4. Keep your hand still and avoid shaking during the measurement process.
  5. The SpO2 and Pulse Rate values will appear on the display within a few seconds.
Steps for taking a measurement with CONTEC CMS50NA Pulse Oximeter

Image: A three-step visual guide showing how to open the clip, insert a finger, and press the power button to take a measurement.

4.2 ഡിസ്പ്ലേ മനസ്സിലാക്കുന്നു

The bright TFT display shows the following information:

  • SpO2: Blood Oxygen Saturation Level (displayed as a percentagഒപ്പം).
  • PRbpm: Pulse Rate (displayed in beats per minute).
  • Pulse Rate Waveform: A graphical representation of your pulse.
  • Pulse Bar Graph: A vertical bar graph indicating pulse intensity.
  • ബാറ്ററി സൂചകം: ശേഷിക്കുന്ന ബാറ്ററി ലൈഫ് കാണിക്കുന്നു.
CONTEC CMS50NA Pulse Oximeter display features

Image: The pulse oximeter display showing SpO2 and PRbpm readings, along with the pulse waveform and bar graph.

4.3 ഡിസ്പ്ലേ ഓറിയന്റേഷൻ

The device features a rotatable multi-directional display. The display orientation automatically adjusts based on how the device is held, ensuring easy readability from various angles.

Rotatable display of CONTEC CMS50NA Pulse Oximeter

Image: The pulse oximeter display shown in different orientations, demonstrating its rotatable feature for easy viewing.

4.4 ഓട്ടോമാറ്റിക് പവർ ഓഫ്

The device will automatically power off after 5 seconds of inactivity or when the finger is removed from the sensor.

5. പരിപാലനം

5.1 ഉപകരണം വൃത്തിയാക്കുന്നു

  • ഓക്സിമീറ്ററിന്റെ ഉപരിതലം മൃദുവായ തുണി ഉപയോഗിച്ച് വൃത്തിയാക്കുക d.amp70% ഐസോപ്രോപൈൽ ആൽക്കഹോൾ അടങ്ങിയിരിക്കുന്നു.
  • Do not immerse the device in water or any cleaning solution.
  • Ensure the device is completely dry before reuse.

5.2 ബാറ്ററി മാറ്റിസ്ഥാപിക്കൽ

Replace batteries when the low battery indicator appears on the display. Always use new 1.5V AAA alkaline batteries.

5.3 സംഭരണം

Store the pulse oximeter in its handy carry pouch in a cool, dry place, away from direct sunlight and extreme temperatures.

6. പ്രശ്‌നപരിഹാരം

പ്രശ്നംസാധ്യമായ കാരണംപരിഹാരം
പവർ ഓണാക്കിയതിന് ശേഷം പ്രദർശനമില്ല.ബാറ്ററികൾ ഡെഡ് അല്ലെങ്കിൽ തെറ്റായി ഇൻസ്റ്റാൾ ചെയ്തു.Replace batteries or re-install them correctly, ensuring polarity.
SpO2 and PR values are unstable.Finger not inserted properly, patient movement, or cold hands.Re-insert finger, remain still, or warm hands before measurement. Ensure no nail polish.
"Finger Out" message displayed.Finger not detected or removed.Ensure finger is fully inserted into the sensor.
ഡിസ്പ്ലേ മങ്ങിയതാണ്.Low battery or screen protective film still on.Replace batteries. Remove the thin protective film from the screen.

7 സ്പെസിഫിക്കേഷനുകൾ

  • മോഡലിൻ്റെ പേര്: CMS50NA
  • ഉൽപ്പന്ന അളവുകൾ: 2.24 x 1.34 x 1.22 ഇഞ്ച്
  • ഭാരം: 3.21 ഔൺസ് (ബാറ്ററികൾക്കൊപ്പം)
  • പവർ ആവശ്യകതകൾ: 2 x 1.5V AAA ആൽക്കലൈൻ ബാറ്ററികൾ
  • ബാറ്ററി ലൈഫ്: Approximately 20-30 hours of continuous operation
  • ഡിസ്പ്ലേ തരം: TFT ഡിസ്പ്ലേ
  • SpO2 അളക്കുന്ന ശ്രേണി: 0% - 100%
  • പൾസ് നിരക്ക് അളക്കുന്ന ശ്രേണി: 30 bpm - 250 bpm
  • ഓട്ടോമാറ്റിക് പവർ ഓഫ്: 5 സെക്കൻഡ് നിഷ്‌ക്രിയത്വത്തിന് ശേഷം
  • നിർമ്മാതാവ്: കോണ്ടെക് മെഡിക്കൽ സിസ്റ്റംസ് കോ., ലിമിറ്റഡ്.

8. വാറണ്ടിയും പിന്തുണയും

For warranty information and customer support, please refer to the official CONTEC webസൈറ്റിൽ ബന്ധപ്പെടുക അല്ലെങ്കിൽ നിങ്ങളുടെ റീട്ടെയിലറെ ബന്ധപ്പെടുക. വാങ്ങിയതിന്റെ തെളിവായി നിങ്ങളുടെ വാങ്ങൽ രസീത് സൂക്ഷിക്കുക.

നിയമപരമായ നിരാകരണം: This product is intended for sports and aviation use only. We are the direct manufacturer, there is a clear screen protector which can be removed before use.

For additional resources, you may refer to the ഔദ്യോഗിക ഉപയോക്തൃ മാനുവൽ (PDF).

9. ഔദ്യോഗിക ഉൽപ്പന്ന വീഡിയോകൾ

How to take measurements with CONTEC50NA pulse oximeter?

Video: An official demonstration by Contec Medical Systems Co., Ltd. showing the correct procedure for taking measurements with the CMS50NA pulse oximeter.