ആമുഖം
The SONICAKE Black Hammer is a versatile guitar multi-effect pedal designed to provide essential tonal components for metal music. It integrates Boost, Hi-Gain Distortion, Chorus, and Delay effects into a single, compact unit. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your Black Hammer pedal to ensure optimal performance.

ഫ്രണ്ട് view of the SONICAKE Black Hammer Multi-Effect Pedal, showcasing its compact design and integrated controls for various effects.
സജ്ജമാക്കുക
Before using your SONICAKE Black Hammer pedal, please follow these steps to ensure proper setup and functionality.
1. പാക്കേജ് ഉള്ളടക്കം
- SONICAKE Black Hammer Multi-Effect Pedal
- ഉപയോക്തൃ മാനുവൽ
- 9V DC പവർ അഡാപ്റ്റർ
2 പവർ ആവശ്യകതകൾ
The Black Hammer pedal requires a 9V DC power adapter. Ensure the adapter's polarity is negative center. Using an incorrect power supply may damage the unit and void the warranty.
3. Connecting the Pedal
- ഇതിലേക്ക് നിങ്ങളുടെ ഗിറ്റാർ ബന്ധിപ്പിക്കുക ഇൻപുട്ട് jack on the pedal using a standard 1/4-inch instrument cable.
- ബന്ധിപ്പിക്കുക ഔട്ട്പുട്ട് jack of the pedal to your amplifier's input using another 1/4-inch instrument cable.
- Plug the 9V DC power adapter into the DC 9V input on the pedal and then into a power outlet.

The Black Hammer pedal is shown connected to a guitar and amplifier, illustrating a typical setup for use.
പെഡൽ പ്രവർത്തിപ്പിക്കുന്നു
The Black Hammer pedal features four distinct effects, each with intuitive controls and LED indicators for active status.

This image illustrates the four core effects integrated into the Black Hammer pedal: Boost, Hi-Gain Distortion, Chorus, and Delay, each with dedicated controls.
Effect Modules:
- ബൂസ്റ്റ്: This module provides a pre-gain boost to increase the volume and drive of your signal, ideal for pushing your amplifier or the Hi-Gain section for solos and heavy riffs.
- HI-GAIN: An analog high-gain distortion with a versatile 3-band EQ (Bass, Mid, Treble) and a smart Noise Gate (NR) to eliminate unwanted hum and feedback. The Volume knob controls the overall output level of the distortion.
- കോറസ്: A BBD-style analog-sounding chorus effect. Controls include Level (mix of wet/dry signal), Depth (intensity of the chorus effect), and Rate (speed of the chorus modulation).
- കാലതാമസം: A 500ms analog-voicing delay. Controls include Mix (wet/dry signal blend), Repeat (number of repeats), and Time (delay time).
LED സൂചകങ്ങൾ:
Each effect module features LED-illuminated control knobs that clearly indicate their working status. When an effect is active, its corresponding LEDs will light up, providing immediate visual feedback.

Close-up of the pedal's LED-illuminated control knobs, providing clear visual feedback on the active status of each effect, especially useful in low-light conditions.
യഥാർത്ഥ ബൈപാസ്:
The Black Hammer pedal features true bypass switching, ensuring that your guitar's signal remains unaffected when the pedal is disengaged. This preserves your original tone without any coloration or signal degradation.
മെയിൻ്റനൻസ്
Proper care and maintenance will extend the lifespan of your SONICAKE Black Hammer pedal.
- വൃത്തിയാക്കൽ: Use a soft, dry cloth to clean the pedal's surface. Avoid using abrasive cleaners, solvents, or excessive moisture, which can damage the finish or internal components.
- സംഭരണം: When not in use, store the pedal in a dry, cool environment away from direct sunlight and extreme temperatures. Disconnect the power adapter when storing for extended periods.
- കണക്ഷനുകൾ: Regularly check all input and output jacks for dust or debris. Ensure cables are securely connected to prevent signal loss or intermittent issues.
ട്രബിൾഷൂട്ടിംഗ്
If you encounter issues with your Black Hammer pedal, refer to the following common problems and solutions:
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| ശബ്ദമില്ല | Incorrect power supply; loose cable connections; pedal not engaged. | Verify 9V DC power adapter is correctly connected. Check all instrument cables. Ensure the effect is engaged (LEDs lit). |
| അനാവശ്യ ശബ്ദം/ഹമ്മ് | Ground loop; faulty cables; high gain settings. | Use a high-quality isolated power supply. Try different cables. Adjust the Noise Gate (NR) knob on the Hi-Gain section. Reduce gain settings. |
| ഇഫക്റ്റ് ഇടപഴകുന്നില്ല | Footswitch issue; internal fault. | Ensure the footswitch is fully pressed. If the issue persists, contact customer support. |
| ദുർബലമായ/വികലമായ ശബ്ദം | Incorrect level settings; impedance mismatch. | Adjust the Level/Volume knobs on the pedal. Ensure your amplifier's input impedance is compatible. |
സ്പെസിഫിക്കേഷനുകൾ
- ഇനത്തിൻ്റെ ഭാരം: 1.1 പൗണ്ട് (0.5 കിലോഗ്രാം)
- ഉൽപ്പന്ന അളവുകൾ: 10.31"L x 2.52"W x 1.73"H
- ഇനം മോഡൽ നമ്പർ: QCE-10-40
- സിഗ്നൽ ഫോർമാറ്റ്: അനലോഗ്
- ഊർജ്ജ സ്രോതസ്സ്: അഡാപ്റ്റർ
- വാല്യംtage: 9 വോൾട്ട്
- Effects Included: Delay, Chorus, Multi Effects, Distortion
വാറൻ്റിയും പിന്തുണയും
SONICAKE products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please visit the official SONICAKE webസൈറ്റിൽ ബന്ധപ്പെടുകയോ അവരുടെ ഉപഭോക്തൃ സേവന വിഭാഗവുമായി ബന്ധപ്പെടുകയോ ചെയ്യുക. ഏതെങ്കിലും വാറന്റി ക്ലെയിമുകൾക്ക് വാങ്ങിയതിന്റെ തെളിവായി നിങ്ങളുടെ വാങ്ങൽ രസീത് സൂക്ഷിക്കുക.





