Geko G02062 3T ബലൂൺ ജാക്ക് ഇൻസ്ട്രക്ഷൻ മാനുവൽ

1. ഉൽപ്പന്നം കഴിഞ്ഞുview

The Geko G02062 3T Balloon Jack is a robust and reliable lifting device designed for various automotive and workshop applications. Constructed from high-quality alloy steel, this pneumatic jack offers a lifting capacity of 3 tons, ensuring solid performance and durability. It is manufactured in Poland, adhering to stringent quality standards.

ചിത്രം 1.1: വശം view of the Geko G02062 3T Balloon Jack, showcasing അതിന്റെ ഒതുക്കമുള്ള രൂപകൽപ്പനയും ഹാൻഡിലും.

2 സുരക്ഷാ വിവരങ്ങൾ

മുന്നറിയിപ്പ്: ഈ സുരക്ഷാ നിർദ്ദേശങ്ങൾ പാലിക്കുന്നതിൽ പരാജയപ്പെടുന്നത് ഗുരുതരമായ പരിക്കോ സ്വത്ത് നാശമോ ഉണ്ടാക്കിയേക്കാം.

• Always read and understand this entire instruction manual before operating the Geko G02062 3T Balloon Jack.
• Ensure the jack is placed on a firm, level, and stable surface capable of supporting the load.
• Never exceed the maximum lifting capacity of 3 tons (6000 lbs).
• Use appropriate jack stands to support the vehicle immediately after lifting. Never rely solely on the balloon jack to hold a vehicle.
• Keep hands, feet, and other body parts clear of the jack and the load during lifting and lowering operations.
• സുരക്ഷാ ഗ്ലാസുകൾ, കയ്യുറകൾ പോലുള്ള ഉചിതമായ വ്യക്തിഗത സംരക്ഷണ ഉപകരണങ്ങൾ (പിപിഇ) ധരിക്കുക.
• Do not use the jack if it shows any signs of damage, leaks, or malfunction.
• വാഹനം ഉയർത്തുന്നതിന് മുമ്പ് പാർക്കിംഗ് ബ്രേക്ക് ഇടുന്നുണ്ടെന്നും ചക്രങ്ങൾ അടഞ്ഞിട്ടുണ്ടെന്നും ഉറപ്പാക്കുക.
• ജാക്ക് മാത്രം താങ്ങിനിർത്തുന്ന വാഹനത്തിനടിയിൽ ഒരിക്കലും പ്രവർത്തിക്കരുത്.

3. പാക്കേജ് ഉള്ളടക്കം

അൺപാക്ക് ചെയ്യുമ്പോൾ, എല്ലാ ഘടകങ്ങളും ഉണ്ടെന്നും കേടുപാടുകൾ സംഭവിച്ചിട്ടില്ലെന്നും ഉറപ്പാക്കുക:

• 1x Geko G02062 3T Balloon Jack

If any parts are missing or damaged, do not use the product and contact your retailer.

4. സജ്ജീകരണം

Before operating the jack, perform the following setup steps:

1. Carefully remove the Geko G02062 3T Balloon Jack from its packaging.
2. Visually inspect the entire jack for any signs of shipping damage, such as dents, cracks, or leaks. Do not proceed if damage is observed.
3. Ensure the air inlet and release valves are in the closed position before connecting to an air source.
4. Connect a suitable compressed air hose to the jack's air inlet valve. Ensure the connection is secure and free of leaks. The recommended air pressure for optimal operation is typically between 6-8 bar (90-120 PSI), but always refer to the specific pressure requirements of your air compressor.

ചിത്രം 4.1: ക്ലോസ്-അപ്പ് view of the control valves and air connection point on the jack's handle.

5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

5.1. ഒരു വാഹനം ഉയർത്തൽ

1. Position the vehicle on a firm, level surface. Engage the parking brake and chock the wheels that will remain on the ground.
2. Carefully slide the Geko G02062 3T Balloon Jack under the vehicle, ensuring the lifting pad is centered directly beneath the manufacturer's recommended lifting point.
3. Slowly open the air inlet valve (typically green or marked 'IN') to allow compressed air to inflate the balloon. The jack will begin to raise the vehicle.
4. Continuously monitor the lifting process to ensure stability and proper alignment. Do not lift the vehicle beyond the maximum safe height or the jack's capacity.
5. Once the desired height is reached, close the air inlet valve securely. Immediately place appropriate jack stands under the vehicle's designated support points.

5.2. വാഹനം താഴ്ത്തൽ

1. Ensure the vehicle is securely supported by jack stands.
2. Slightly raise the vehicle with the balloon jack to relieve pressure on the jack stands, then carefully remove the jack stands.
3. Slowly open the air release valve (typically red or marked 'OUT') to gradually deflate the balloon, lowering the vehicle. Control the rate of descent by adjusting the valve opening.
4. Once the vehicle is fully lowered and resting on its wheels, close the air release valve and remove the jack from underneath the vehicle.

ചിത്രം 5.1: വിശദമായത് view of the multi-stage balloon and the robust lifting pad, designed for stable contact with the vehicle.

6. പരിപാലനം

Regular maintenance ensures the longevity and safe operation of your Geko G02062 3T Balloon Jack:

• വൃത്തിയാക്കൽ: Keep the jack clean and free from dirt, grease, and debris. Wipe down the exterior with a damp ഓരോ ഉപയോഗത്തിനും ശേഷം തുണി.
• പരിശോധന: Regularly inspect the air hose, connections, and the balloon for any signs of wear, cuts, punctures, or leaks. Check all bolts and fasteners for tightness.
• സംഭരണം: Store the jack in a dry, clean, and safe environment when not in use. Avoid exposing it to extreme temperatures or direct sunlight for prolonged periods.
• ലൂബ്രിക്കേഷൻ: Periodically apply a light coat of general-purpose lubricant to moving parts, such as the wheels and handle pivot points, to ensure smooth operation.
• പരിഷ്കാരങ്ങളൊന്നുമില്ല: Do not attempt to modify the jack in any way. Unauthorized modifications can compromise safety and void any warranty.

7. പ്രശ്‌നപരിഹാരം

This section addresses common issues you might encounter with your Geko G02062 3T Balloon Jack:

• Issue: Jack does not lift or lifts slowly.
  സാധ്യമായ കാരണങ്ങളും പരിഹാരങ്ങളും:
  • Insufficient Air Pressure: Ensure your air compressor is providing adequate pressure (6-8 bar / 90-120 PSI) and that the air supply is connected securely.
  • Air Inlet Valve Closed: Verify the air inlet valve is fully open.
  • ഓവർലോഡ്: Confirm the weight of the vehicle does not exceed the jack's 3-ton capacity.
  • വായു ചോർച്ച: Check all air connections and the balloon for audible leaks. Tighten connections or replace damaged components if necessary.
• Issue: Jack lowers too quickly or unexpectedly.
  സാധ്യമായ കാരണങ്ങളും പരിഹാരങ്ങളും:
  • Air Release Valve Open: Ensure the air release valve is fully closed when lifting and only opened slowly for controlled lowering.
  • വായു ചോർച്ച: Inspect the balloon and air lines for any damage or leaks that could cause rapid pressure loss.
• Issue: Jack is unstable during operation.
  സാധ്യമായ കാരണങ്ങളും പരിഹാരങ്ങളും:
  • അസമമായ ഉപരിതലം: Always operate the jack on a firm, level, and stable surface.
  • Improper Load Placement: Ensure the vehicle's lifting point is centered on the jack's lifting pad.
  • Damaged Jack: Discontinue use if the jack appears bent, cracked, or otherwise compromised.

If you encounter issues not listed here or if troubleshooting steps do not resolve the problem, contact your retailer or a qualified service technician.

8 സ്പെസിഫിക്കേഷനുകൾ

9. വാറൻ്റിയും പിന്തുണയും

Warranty and support information for the Geko G02062 3T Balloon Jack is not available in this document. Please refer to your purchase documentation, the product packaging, or contact the retailer from whom you purchased the product for specific details regarding warranty coverage and customer support services.