KING PX2417-ECO-WD-R

കിംഗ് PX2417-ECO-WD-R PX ECO2S 2-Stagഇ ഇലക്ട്രിക് വാൾ ഹീറ്റർ യൂസർ മാനുവൽ

Model: PX2417-ECO-WD-R | Brand: KING

പ്രധാനപ്പെട്ട സുരക്ഷാ വിവരങ്ങൾ

Please read this entire manual before installation or use of this heater. Failure to follow these instructions could result in electric shock, fire, property damage, or personal injury. Keep this manual for future reference.

ഉൽപ്പന്നം കഴിഞ്ഞുview

The KING PX ECO2S Electric Wall Heater is designed for efficient and comfortable heating. Featuring 2-stage heating technology, it automatically adjusts wattage to maintain desired room temperature, optimizing energy use. It includes a remote control and a remote temperature sensor for precise temperature management.

KING PX ECO2S Electric Wall Heater with remote and remote sensor
Image: The KING PX ECO2S Electric Wall Heater, shown with its accompanying remote control and remote temperature sensor.

പ്രധാന സവിശേഷതകൾ:

പാക്കേജ് ഉള്ളടക്കം

സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

Installation of the KING PX ECO2S Electric Wall Heater requires electrical wiring and should only be performed by a qualified electrician to ensure safety and compliance with local codes.

പൊതു ഇൻസ്റ്റാളേഷൻ ഘട്ടങ്ങൾ:

  1. Prepare Wall Opening: Mark and cut an opening in the wall according to the rough-in dimensions (typically 14"W x 8"L x 4" Depth).
  2. Secure Wall Can: Install the heater's wall can into the prepared opening, ensuring it is securely fastened to wall studs.
  3. ഇലക്ട്രിക്കൽ വയറിംഗ്: Connect the electrical supply wires to the heater's terminal block inside the wall can. Ensure proper voltage (240V for this model) and ampഇറേജ്.
  4. Install Heater Assembly: Insert the heater assembly into the wall can and secure it.
  5. ഗ്രിൽ അറ്റാച്ചുചെയ്യുക: Fasten the front grille to the heater assembly.
  6. പവർ ഓൺ: Restore power at the main service panel.
Diagram showing three steps for easy installation of a wall heater: preparing the rough-in, installing the internal unit, and attaching the grille.
Image: Visual guide illustrating the three main steps for installing the wall heater: preparing the wall opening, inserting the heater unit, and securing the front grille.

കുറിപ്പ്: The heater unit is designed to fit between standard wall studs. Wiring access is typically from the bottom; plan your electrical rough-in accordingly.

ഇൻസ്റ്റാളേഷൻ വീഡിയോ:

Video: This video demonstrates the installation process for the King Electric PX Eco2S 2-Stage Electronic Smart Wall Heater, showing how to prepare the wall, install the unit, and connect wiring.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The PX ECO2S heater can be operated using the controls on the unit or the included remote control. The ECO2S Remote Temperature Sensor should be placed in the desired heating area, away from drafts or direct heat sources, for optimal temperature sensing.

ഫ്രണ്ട് view of the KING PX ECO2S Electric Wall Heater with digital display and control buttons.
ചിത്രം: മുൻഭാഗം view of the heater, showing the digital display and control panel for setting temperature and mode.

റിമോട്ട് കൺട്രോൾ ഉപയോഗിക്കുന്നത്:

Hand-held remote control for the KING PX ECO2S Electric Wall Heater with Start/Stop, Mode, Up, and Down buttons.
Image: The compact remote control, featuring buttons for power, mode selection, and temperature adjustment.

2-എസ്tage Heating Operation:

The ECO2S system automatically selects the appropriate wattage (high or low) to efficiently heat your space. When the room is cold, it uses full power to quickly reach the set temperature. Once the desired temperature is achieved, it reduces wattage to maintain comfort and save energy.

ടൈമർ മോഡ്:

The heater features a timer mode, allowing you to set it to run for a specific duration. Consult the detailed instructions in the full manual for setting the timer function.

മെയിൻ്റനൻസ്

Regular maintenance ensures optimal performance and longevity of your heater. Always disconnect power at the main service panel before performing any maintenance.

ട്രബിൾഷൂട്ടിംഗ്

If your heater is not operating correctly, refer to the following common issues and solutions:

പ്രശ്നംസാധ്യമായ കാരണംപരിഹാരം
ഹീറ്റർ ഓണാക്കുന്നില്ല.No power, tripped circuit breaker, incorrect thermostat setting.Check circuit breaker. Ensure power is supplied to the unit. Verify thermostat is set above room temperature.
Heater runs but no heat.Fan-only mode selected, element issue.Check if the heater is in fan-only mode and switch to a heating mode. If problem persists, contact a qualified technician.
ആവശ്യത്തിന് ചൂടാക്കൽ ഇല്ല.തെറ്റായ വാട്ട്tage setting, remote sensor placement, room size.Ensure the heater is set to the appropriate wattage for the room size. Reposition the remote sensor for better accuracy.
അസാധാരണമായ ശബ്ദങ്ങൾ അല്ലെങ്കിൽ ഗന്ധം.Dust accumulation, internal component issue.Turn off and disconnect power. Clean grilles. If noises or odors persist, contact a qualified technician.

For issues not listed here or if troubleshooting steps do not resolve the problem, contact KING customer support or a qualified electrician.

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റിയും പിന്തുണയും

For warranty information, please refer to the documentation included with your product or visit the official KING website. For technical support, replacement parts, or service inquiries, please contact KING customer service directly.

നിർമ്മാതാവ്: കിംഗ് ഇലെക്ട്രിക്

ബന്ധപ്പെടാനുള്ള വിവരങ്ങൾ: നിർമ്മാതാവിന്റെ webഏറ്റവും പുതിയ കോൺടാക്റ്റ് വിശദാംശങ്ങൾക്കായി സൈറ്റ് അല്ലെങ്കിൽ ഉൽപ്പന്ന പാക്കേജിംഗ്.

അനുബന്ധ രേഖകൾ - PX2417-ECO-WD-R

പ്രീview കിംഗ് KBP ECO2S+ സീരീസ് കോംപാക്റ്റ് യൂണിറ്റ് ഹീറ്റർ - ഊർജ്ജക്ഷമതയുള്ള 2-Stagഇ ചൂടാക്കൽ
ഊർജ്ജ സംരക്ഷണമുള്ള ECO2S+ ഇലക്ട്രോണിക് കൺട്രോൾ ഫീച്ചർ ചെയ്യുന്ന കിംഗ് KBP ECO2S+ സീരീസ് കോംപാക്റ്റ് യൂണിറ്റ് ഹീറ്ററിനെക്കുറിച്ചുള്ള വിശദമായ വിവരങ്ങൾ, 2-സെ.tagഇ ഹീറ്റിംഗ്, റിമോട്ട് ടെമ്പറേച്ചർ സെൻസിംഗ്, വൈവിധ്യമാർന്ന ഇൻസ്റ്റലേഷൻ ഓപ്ഷനുകൾ. സ്പെസിഫിക്കേഷനുകൾ, ഓർഡർ വിവരങ്ങൾ, എഞ്ചിനീയറിംഗ് വിശദാംശങ്ങൾ എന്നിവ ഉൾപ്പെടുന്നു.
പ്രീview കിംഗ് LPW-ECO സീരീസ് ഹീറ്റർ ഇൻസ്റ്റാളേഷനും മെയിന്റനൻസ് ഗൈഡും
കിംഗ് LPW-ECO സീരീസ് ഇലക്ട്രോണിക് ഹീറ്ററുകൾ ഇൻസ്റ്റാൾ ചെയ്യുന്നതിനും പ്രവർത്തിപ്പിക്കുന്നതിനും പരിപാലിക്കുന്നതിനുമുള്ള സമഗ്രമായ ഗൈഡ്, സുരക്ഷാ നിർദ്ദേശങ്ങൾ, വയറിംഗ് ഡയഗ്രമുകൾ, റിമോട്ട് സെൻസർ സജ്ജീകരണം, ട്രബിൾഷൂട്ടിംഗ് എന്നിവ ഇതിൽ ഉൾപ്പെടുന്നു.
പ്രീview കിംഗ് LPW ECO2S PRO ഹീറ്റർ: ഇൻസ്റ്റാളേഷൻ, പരിപാലനം, പ്രവർത്തന മാനുവൽ
കിംഗ് LPW ECO2S PRO 7-ദിവസത്തെ പ്രോഗ്രാമബിൾ 2-S-നുള്ള സമഗ്ര ഗൈഡ്tagറിമോട്ട് ടെമ്പറേച്ചർ സെൻസിംഗ് കൺട്രോളറുള്ള ഇ ഇലക്ട്രോണിക് ഹീറ്റർ. ഇൻസ്റ്റാളേഷൻ, വയറിംഗ്, വാട്ട് എന്നിവ ഉൾക്കൊള്ളുന്നു.tagഇ തിരഞ്ഞെടുക്കൽ, സജ്ജീകരണം, പ്രവർത്തനം, അറ്റകുറ്റപ്പണി, പ്രശ്‌നപരിഹാരം, വാറന്റി വിവരങ്ങൾ.
പ്രീview കിംഗ് PSH2440TB പോർട്ടബിൾ ഷോപ്പ് ഹീറ്റർ: ഇൻസ്റ്റാളേഷൻ, ഓപ്പറേഷൻ, സുരക്ഷാ മാനുവൽ
കിംഗ് PSH2440TB പോർട്ടബിൾ ഷോപ്പ് ഹീറ്ററിനെക്കുറിച്ചുള്ള അവശ്യ വിവരങ്ങൾ ഈ സമഗ്ര മാനുവലിൽ അടങ്ങിയിരിക്കുന്നു, അതിൽ ഇൻസ്റ്റാളേഷൻ, സുരക്ഷാ മാർഗ്ഗനിർദ്ദേശങ്ങൾ, പ്രവർത്തന നിർദ്ദേശങ്ങൾ, അറ്റകുറ്റപ്പണി നുറുങ്ങുകൾ, ട്രബിൾഷൂട്ടിംഗ് പരിഹാരങ്ങൾ എന്നിവ ഉൾപ്പെടുന്നു. ഗാരേജിലും വർക്ക്ഷോപ്പിലും ഉപയോഗിക്കുന്നതിനായി രൂപകൽപ്പന ചെയ്‌തിരിക്കുന്ന ഇത് 3750W പവറും 240V പ്രവർത്തനവും നൽകുന്നു.
പ്രീview കിംഗ് PX ECO2S PRO 7-ദിവസത്തെ പ്രോഗ്രാമബിൾ കൺട്രോളർ ഇൻസ്റ്റാളേഷനും ഓപ്പറേഷൻ മാനുവലും
കിംഗ് PX ECO2S PRO 7-ദിവസത്തെ പ്രോഗ്രാമബിൾ 2-S-നുള്ള സമഗ്ര ഗൈഡ്tagറിമോട്ട് ടെമ്പറേച്ചർ സെൻസിംഗ് ഉള്ള ഇലക്ട്രോണിക് കൺട്രോളർ. സുരക്ഷാ നിർദ്ദേശങ്ങൾ, ഇൻസ്റ്റാളേഷൻ, വയറിംഗ്, വാട്ട് എന്നിവ ഉൾപ്പെടുന്നു.tagഇ സെലക്ഷൻ, കൺട്രോളർ ജോടിയാക്കൽ, സജ്ജീകരണം, പ്രവർത്തന മോഡുകൾ, പ്രോഗ്രാമിംഗ്, ട്രബിൾഷൂട്ടിംഗ്, അറ്റകുറ്റപ്പണി, ഓപ്ഷണൽ സെൻസർ ഇന്റഗ്രേഷൻ.
പ്രീview കിംഗ് കെഡിഎസ്ആർ സീരീസ് ഇലക്ട്രിക് ഹീറ്റർ ഇൻസ്റ്റാളേഷൻ, ഓപ്പറേഷൻ, മെയിന്റനൻസ് മാനുവൽ
Comprehensive guide for King KDSR Series electric heaters (2 kW to 5 kW), covering installation, safe operation, and regular maintenance. Includes important safety warnings and instructions for standard and suspended ceiling mounting.