1. ഉൽപ്പന്നം കഴിഞ്ഞുview
The Antminer S9i 14TH/s is a high-performance ASIC (Application-Specific Integrated Circuit) miner specifically designed for Bitcoin mining. This device offers a robust hash rate and efficient power consumption, making it suitable for cryptocurrency mining operations.
ചിത്രം 1: മുൻഭാഗം view of the Antminer S9i 14TH/s Bitcoin Miner, showcasing its compact design and cooling fan.
പ്രധാന സവിശേഷതകളിൽ ഇവ ഉൾപ്പെടുന്നു:
- High Hash Rate: Achieves a total hash rate of 14.00 TH/s, distributed across three hash boards, each containing 63 hash chips.
- കാര്യക്ഷമമായ വൈദ്യുതി ഉപഭോഗം: Designed for optimal power efficiency with a rating of 94 J/TH + 10%.
- ശക്തമായ തണുപ്പിക്കൽ: Features an air cooling method to maintain optimal operating temperatures.
2. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
Follow these steps to properly set up your Antminer S9i:
- അൺപാക്ക് ചെയ്യുന്നു: Carefully remove the Antminer from its packaging. Inspect for any visible damage.
- പവർ കണക്ഷൻ: The device requires power to all three PCI-E ports on the hash boards. It is recommended to power the control board before connecting power to the hash boards. You can use one Power Supply Unit (PSU) to power several boards, but avoid powering a single board with two PSUs.
ചിത്രം 2: ആന്തരിക view of the Antminer S9i, showing the hash boards and PCI-E power connectors. Ensure all three PCI-E ports are connected to a power supply.
- നെറ്റ്വർക്ക് കണക്ഷൻ: Connect an Ethernet cable from your network router or switch to the Ethernet port on the Antminer's control board.
Figure 3: Close-up of the Antminer S9i control board, highlighting the Ethernet port for network connectivity and indicator lights (Reset, Fault, Normal).
- പ്ലേസ്മെൻ്റ്: Place the Antminer in a well-ventilated area to ensure proper airflow for cooling. The operating temperature range is 0 to 40°C.
3. പ്രവർത്തന നിർദ്ദേശങ്ങൾ
Once the Antminer S9i is powered on and connected to the network, it will begin its initialization process. You can typically access the miner's web interface via its IP address to configure mining pools and monitor performance.
- ഹാഷ് നിരക്ക്: The device is designed to achieve a hash rate of 14.00 TH/s.
- പവർ സ്പെസിഫിക്കേഷനുകൾ:
- ഡിസി വോളിയംtage Input: 11.60 to 13.00V
- DC Input Current (at 12V): 102.3 A +10%
- DC Input Power (at 12V): 1228 W +10%
- 220VAC Power @25°C, 93% conversion efficiency of APW3: 1320 W +10%
- ശബ്ദ നില: The typical noise level during operation is 76 dB. Consider this when choosing a location for the miner.
ചിത്രം 4: മുൻഭാഗം view of the Antminer S9i's cooling fan, essential for maintaining operational temperature.
ചിത്രം 5: പിൻഭാഗം view of the Antminer S9i's cooling fan, showing the Nidec UltraFlo branding, indicating a high-performance fan.
4. പരിപാലനം
Regular maintenance helps ensure the longevity and optimal performance of your Antminer S9i:
- പരിസ്ഥിതി വ്യവസ്ഥകൾ:
- സംഭരണ താപനില: -40 മുതൽ 85 ഡിഗ്രി സെൽഷ്യസ് വരെ
- Operation Humidity: 5%RH-95%RH (non-condensing)
- പൊടി നീക്കം: Periodically clean the fans and heatsinks to prevent dust buildup, which can impede airflow and lead to overheating. Use compressed air for best results.
- കേബിൾ മാനേജുമെന്റ്: Ensure all power and network cables are securely connected and not obstructing airflow.
5. പ്രശ്നപരിഹാരം
If you encounter issues with your Antminer S9i, consider the following:
- ശക്തിയില്ല:
- Verify that all three PCI-E power connectors are securely plugged into the hash boards and the control board is powered.
- Ensure the Power Supply Unit (PSU) is functioning correctly and providing adequate power.
- നെറ്റ്വർക്ക് കണക്ഷൻ ഇല്ല:
- Check the Ethernet cable connection to both the miner and your network device.
- Confirm your network router/switch is operational.
- Observe the network indicator lights on the control board (refer to Figure 3).
- Low Hash Rate:
- Ensure the miner is operating within the recommended temperature range (0 to 40°C). Overheating can lead to performance degradation.
- Check for dust buildup on fans and heatsinks.
- Verify mining pool configuration and internet connectivity.
- ശാരീരിക അവസ്ഥ: Minor scratches and rust on the surface do not typically affect the functionality of the device. All hash boards are tested to ensure they are in good working condition before shipment.
6 സ്പെസിഫിക്കേഷനുകൾ
Detailed technical specifications for the Antminer S9i 14.0TH/s:
Figure 6: Detailed specifications table for the Antminer S9i 14.0TH/s.
| പരാമീറ്റർ | മൂല്യം |
|---|---|
| ഉൽപ്പന്ന മോഡൽ | S9i-14.0 |
| Total Quantity of Hash Chips | 189 പിസിഎസ് |
| Total Quantity of Hash Boards | 3 പിസിഎസ് |
| Total Hash Rate | 14.00 TH/s |
| ഡിസി വോളിയംtagഇ ഇൻപുട്ട് | 11.60~13.00 വി |
| DC Current Input @12V DC Input | 102.3 A +10% |
| DC Power @12V DC Input | 1228 W +10% |
| 220VAC Power @25°C, 93% conversion efficiency of APW3 | 1320 W +10% |
| പവർ എഫിഷ്യൻസി | 94 J/TH +10% |
| ഭാരം (പാക്കേജ് ഇല്ലാതെ) | 4.2 കി.ഗ്രാം (9.24 പൗണ്ട്) |
| പ്രവർത്തന താപനില | 0-40 °C |
| സംഭരണ താപനില | -40 മുതൽ 85 ഡിഗ്രി സെൽഷ്യസ് വരെ |
| ഓപ്പറേഷൻ ഈർപ്പം | 5%RH-95%RH, ഘനീഭവിക്കുന്നത് തടയുക |
| ശബ്ദം | 76 ഡി.ബി |
| Networking Connection Mode | ഇഥർനെറ്റ് കേബിൾ |
| Power Connection Mode | All three PCI-E ports are required to power the board. One PSU can power multiple boards, but do not attempt to power one board with two PSUs. Control board should be powered up before hash boards. |
| വലിപ്പം (നീളം*വീതി*ഉയരം) | 350mm*135mm*158mm (13.78 x 5.31 x 6.22 inches) |
7. വാറൻ്റിയും പിന്തുണയും
For specific warranty terms and conditions, please refer to the documentation provided by your seller or the official Antminer webസൈറ്റ്. വാറന്റി കവറേജ് സാധാരണയായി നിർമ്മാണ വൈകല്യങ്ങൾ പരിഹരിക്കുന്നു.
For technical support, troubleshooting assistance beyond this manual, or inquiries regarding repairs, please contact the manufacturer or your authorized reseller. Ensure you have your product model number (S9i 14.0TH/s) and serial number ready when seeking support.
