FRER Q15E2 DIN Rail Mounting Multifunction Meter User Manual

1. ആമുഖം

The FRER Q15E2 is a high-efficiency DIN rail mounting multifunction meter designed for three-phase electrical systems. It features a 2-line LCD display for clear readings and provides comprehensive measurement capabilities for various electrical parameters. This manual provides essential information for the safe and effective installation, operation, and maintenance of the Q15E2 meter.

2 സുരക്ഷാ വിവരങ്ങൾ

Please read and understand all safety instructions before installing, operating, or servicing the FRER Q15E2 meter. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• ഇൻസ്റ്റാളേഷനും സർവീസിംഗും യോഗ്യതയുള്ള ഉദ്യോഗസ്ഥർ മാത്രമേ നടത്താവൂ.
• ഏതെങ്കിലും വൈദ്യുത കണക്ഷനുകൾ സ്ഥാപിക്കുന്നതിന് മുമ്പ് എല്ലാ വൈദ്യുതി ബന്ധങ്ങളും വിച്ഛേദിക്കപ്പെട്ടുവെന്ന് ഉറപ്പാക്കുക.
• Verify correct wiring according to the provided diagrams to prevent damage to the meter or connected equipment.
• മീറ്റർ കേടായതായി തോന്നിയാൽ അത് പ്രവർത്തിപ്പിക്കരുത്.
• എല്ലാ പ്രാദേശിക, ദേശീയ വൈദ്യുത കോഡുകളും നിരീക്ഷിക്കുക.

3. ഉൽപ്പന്നം കഴിഞ്ഞുview

The FRER Q15E2 meter is housed in a compact enclosure suitable for DIN rail mounting. It features a clear LCD display, control buttons, and various terminal connections for power, measurement inputs, and communication.

Figure 1: FRER Q15E2 Multifunction Meter. This image displays the FRER Q15E2 meter from an angled front-top perspective. The device is beige-colored with a rectangular 2-line LCD screen labeled 'Q15E2' above it. To the right of the screen are three blue buttons: an arrow pointing right, an arrow pointing up, and an 'ENTER' button. The top of the meter features multiple screw terminals, including those labeled '64 65 B- A+ RS485' for communication, '82 83 + -' for auxiliary power, and '60 61 62 63 OUT 1 OUT 2' for outputs. The bottom of the meter also has numerous screw terminals for electrical connections, including those labeled 'L1', 'L2', 'L3', and 'N'. A warning triangle symbol is visible on the top left corner.

3.1 പ്രധാന ഘടകങ്ങൾ

• LCD ഡിസ്പ്ലേ: 2-line display for showing measured values and menu options.
• നാവിഗേഷൻ ബട്ടണുകൾ: Up, Right, and Enter buttons for menu navigation and parameter selection.
• RS485 കമ്മ്യൂണിക്കേഷൻ പോർട്ട്: Terminals B- (64) and A+ (65) for Modbus RTU communication.
• Auxiliary Power Input: Terminals 82 (+) and 83 (-) for meter power supply.
• ഡിജിറ്റൽ ഔട്ട്പുട്ടുകൾ: Terminals 60, 61, 62, 63 for OUT 1 and OUT 2.
• അളക്കൽ ഇൻപുട്ടുകൾ: Terminals for connecting voltage (L1, L2, L3, N) and current transformers (not explicitly visible but implied by multifunction meter type).

4. സജ്ജീകരണം

4.1 മൗണ്ടിംഗ്

The Q15E2 meter is designed for standard 35mm DIN rail mounting. Ensure sufficient space for ventilation and wiring connections.

1. Hook the top edge of the meter onto the DIN rail.
2. Push the bottom edge of the meter firmly until it clicks into place on the rail.

4.2 വയറിംഗ്

All wiring must be performed with the power supply disconnected. Refer to the wiring diagram provided with the product for specific connection details. The following describes general connections:

• സഹായ ശക്തി: Connect the auxiliary power supply to terminals 82 (+) and 83 (-). Verify the voltage matches the meter's specifications.
• വാല്യംtagഇ ഇൻപുട്ടുകൾ: Connect the phase voltages (L1, L2, L3) and neutral (N) to the corresponding terminals at the bottom of the meter.
• Current Inputs: Connect the secondary windings of current transformers (CTs) to the designated current input terminals. Ensure correct polarity.
• RS485 ആശയവിനിമയം: Connect the RS485 communication bus to terminals 64 (B-) and 65 (A+).
• ഡിജിറ്റൽ ഔട്ട്പുട്ടുകൾ: Connect external devices to terminals 60-63 for digital output functionality as required.

5. പ്രവർത്തിക്കുന്നു

5.1 പവർ ഓണാണ്

Once all wiring is complete and verified, apply power to the auxiliary power input. The meter's LCD display will illuminate and show initial readings or a startup sequence.

5.2 ഡിസ്പ്ലേ നാവിഗേഷൻ

The Q15E2 uses three buttons for navigating through its menus and displaying various parameters:

• മുകളിലേക്കുള്ള അമ്പടയാള ബട്ടൺ: Scrolls through parameters or menu options upwards.
• വലത് അമ്പടയാള ബട്ടൺ: Scrolls through parameters or menu options to the right, or enters a submenu.
• എന്റർ ബട്ടൺ: Confirms a selection or enters a parameter editing mode.

Press the Right Arrow button to cycle through different measurement screens (e.g., Voltage, Current, Power, Energy). Use the Up Arrow button to view different phases or specific values within a screen. Press ENTER to access configuration menus (if enabled).

5.3 പാരാമീറ്റർ കോൺഫിഗറേഷൻ

To configure settings such as CT ratios, communication parameters, or output functions, access the configuration menu. This typically involves pressing and holding the ENTER button for a few seconds or navigating to a specific menu item. Follow the on-screen prompts to adjust parameters. Always save changes before exiting the configuration menu.

6. പരിപാലനം

The FRER Q15E2 meter is designed for long-term, reliable operation with minimal maintenance.

• വൃത്തിയാക്കൽ: Keep the meter clean and free from dust. Use a soft, dry cloth for cleaning the display and casing. അബ്രാസീവ് ക്ലീനറുകളോ ലായകങ്ങളോ ഉപയോഗിക്കരുത്.
• പരിശോധന: Periodically inspect wiring connections for tightness and signs of wear or damage.
• ഫേംവെയർ അപ്‌ഡേറ്റുകൾ: If firmware updates become available, follow the specific instructions provided by FRER for the update process.

7. പ്രശ്‌നപരിഹാരം

This section addresses common issues that may arise during the operation of the Q15E2 meter.

7.1 No Display or Blank Screen

• Check Auxiliary Power: Ensure the auxiliary power supply is connected correctly to terminals 82 and 83 and is within the specified voltagഇ ശ്രേണി.
• വയറിംഗ് പരിശോധിക്കുക: Confirm that all power connections are secure and correctly wired.

7.2 Incorrect Readings

• CT അനുപാതം: Verify that the Current Transformer (CT) ratio configured in the meter matches the physical CTs installed.
• Wiring Polarity: Check the polarity of current transformer connections. Reversed polarity will result in negative power readings.
• വാല്യംtagഇ കണക്ഷനുകൾ: വോളിയം ഉറപ്പാക്കുകtage inputs are connected to the correct phases and neutral.

7.3 Communication Issues (RS485)

• വയറിംഗ്: Check RS485 wiring for correct polarity (A+ to A+, B- to B-) and secure connections.
• Baud Rate/Parity: Ensure the meter's communication settings (baud rate, parity, stop bits) match those of the master device.
• ഉപകരണ വിലാസം: Verify the Modbus address of the meter is unique on the bus.

If issues persist, contact FRER technical support.

8 സ്പെസിഫിക്കേഷനുകൾ

• മോഡൽ: Q15E2
• നിർമ്മാതാവ്: ഫ്രെർ
• ഡിസ്പ്ലേ: 2-ലൈൻ എൽസിഡി
• മൗണ്ടിംഗ്: DIN റെയിൽ
• ആശയവിനിമയം: RS485 (Modbus RTU)
• ഇൻപുട്ടുകൾ: ത്രീ-ഫേസ് വോള്യംtagഇയും കറൻ്റും
• ഔട്ട്പുട്ടുകൾ: Digital outputs (OUT 1, OUT 2)
• ആദ്യം ലഭ്യമായത്: സെപ്റ്റംബർ 14, 2018

For detailed electrical and environmental specifications, please refer to the product datasheet available on the FRER webസൈറ്റ്.

9. വാറൻ്റിയും പിന്തുണയും

The FRER Q15E2 meter is covered by a manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official FRER webസൈറ്റ്.

For technical assistance, troubleshooting, or spare parts, please contact FRER customer support or your authorized distributor. When contacting support, please have your meter's model number (Q15E2) and any relevant purchase information ready.