ആമുഖം
This manual provides detailed instructions for the installation, operation, and maintenance of your Amazon Basics Electronic Keypad Deadbolt Door Lock. Please read this manual thoroughly before installation and use to ensure proper function and safety. Keep this manual for future reference.
Image: The Amazon Basics Electronic Keypad Deadbolt Door Lock, featuring a touch-control keypad and a traditional key cylinder, in an oil bronze finish.
സുരക്ഷാ വിവരങ്ങൾ
Always follow basic safety precautions when installing and operating this electronic deadbolt. Failure to do so may result in injury, damage to the product, or property damage.
- ലോക്ക് വേർപെടുത്താനോ പരിഷ്ക്കരിക്കാനോ ശ്രമിക്കരുത്. ഇത് വാറന്റി അസാധുവാക്കുകയും സുരക്ഷയെ അപകടപ്പെടുത്തുകയും ചെയ്തേക്കാം.
- Use only the specified battery type (4 AA 1.5V Alkaline batteries). Do not mix old and new batteries or different types of batteries.
- Ensure the door is properly aligned and the deadbolt operates smoothly before relying on the electronic locking mechanism.
- Keep your programming code and user codes confidential.
- Avoid exposing the lock to extreme temperatures or direct moisture.
പാക്കേജ് ഉള്ളടക്കം
Verify that all components are present before beginning installation. If any parts are missing or damaged, contact customer support.
Image: A complete set of components for the deadbolt lock, including the keypad assembly, interior assembly, deadbolt latch, strike plate, screws, and keys.
പാക്കേജിൽ ഉൾപ്പെടണം:
- Drive-in Sleeve x 1
- Square corner latch x 1
- സ്ട്രൈക്ക് പ്ലേറ്റ് x 1
- സിലിണ്ടർ x 1
- Deadbolt Latch x 1
- മൗണ്ടിംഗ് പ്ലേറ്റ് x 1
- Deadbolt Chassis Screws x 2
- മെഷീൻ സ്ക്രൂകൾ x 3
- വുഡ് സ്ക്രൂകൾ x 5
- കീ x 2
- Deadbolt Keypad Assembly x 1
- Receiver Assembly x 1
For a visual guide on package contents, refer to the video below:
Video: A segment from the official product video demonstrating the package contents of the electronic keypad deadbolt door lock.
ഇൻസ്റ്റലേഷൻ
This section guides you through the step-by-step installation process of your new electronic keypad deadbolt. Ensure you have the necessary tools, such as a screwdriver, before you begin.
Image: A detailed diagram illustrating the required door measurements for proper deadbolt installation, including backset, hole diameter, bore diameter, and door thickness.
Step 1: Install Latch & Keypad Assembly
Determine if the latch needs to be adjusted to the 2-3/4" (70mm) backset. To adjust, rotate the latch until it stops. Reverse the direction to return to the 2-3/8" (60mm) backset. Insert the latch and ensure it is parallel to the door face. Use 2 wood screws to secure the latch.
Video: A segment from the official product video demonstrating how to install the latch and keypad assembly, including adjusting the backset and securing the latch.
Step 2: Install Inside Mounting Plate
Insert the tailpiece of the outside assembly until it passes through the latch. The tailpiece should fit through the black cam. Pass the harness under the latch to the interior side of the door. Attach the mounting plate with screws, tightening them lightly at first. Adjust the outside lock assembly position as needed, then fully tighten the screws.
Video: A segment from the official product video detailing the installation of the inside mounting plate, including routing the harness and securing the plate.
ഘട്ടം 3: ഡോർ ഹാൻഡിംഗ് തിരിച്ചറിയുക
Face the door from the outside. The door is left-handed if the hinges are on the left side of the door. Whereas, the door is right-handed if the hinges are on the right side of the door.
Image: A visual guide to determine if your door is left-handed or right-handed based on hinge placement when viewപുറത്തു നിന്ന് എഡിറ്റ് ചെയ്തു.
Video: A segment from the official product video explaining how to identify door handing (left-handed vs. right-handed).
Step 4: Adjust Turn Piece
Rotate the turn piece to the RIGHT at 45° for left-handed doors. Rotate the turn piece to the LEFT at 45° for right-handed doors.
Video: A segment from the official product video demonstrating how to adjust the turn piece based on the door's handing.
ഘട്ടം 5: ഇന്റീരിയർ അസംബ്ലി ഇൻസ്റ്റാൾ ചെയ്യുക
Connect the inner and outer harness connectors. Then attach the interior assembly to the door with screws. Insert 4 (AA) 1.5V Alkaline batteries and cover the battery lid. Alkaline batteries are recommended to stabilize the power supply.
Video: A segment from the official product video detailing the installation of the interior assembly, including connecting wires and inserting batteries.
പ്രവർത്തന നിർദ്ദേശങ്ങൾ
Learn how to program and manage your lock's features for optimal security and convenience.
ഡോർ ഹാൻഡിംഗ് തിരിച്ചറിയൽ പ്രക്രിയ
The lock needs to learn if this is a right-handed or left-handed door. This must be done first after installation or restoring default settings. Enter the Programming Code (PC), then press the lock/unlock button, then '0', then the lock/unlock button again. The default Programming Code (PC) is 0000.
Video: A segment from the official product video demonstrating the door handing identification process for the lock.
പ്രോഗ്രാമിംഗ് കോഡ് മാറ്റുക (PC)
To change the Programming Code, enter the current PC, then press the lock/unlock button, then '4', then the lock/unlock button again. Then enter your New PC and press the lock/unlock button. Programming Codes should be 4-10 digits in length.
Video: A segment from the official product video showing how to change the Programming Code (PC) of the lock.
Create New User Code (UC)
Up to 6 sets of user codes can be saved. To create a new User Code, enter the PC, then press the lock/unlock button, then '1', then the lock/unlock button again. Then enter your New User Code and press the lock/unlock button. User codes should be 4-10 digits in length.
Video: A segment from the official product video demonstrating the process of creating a new User Code (UC).
Delete an Existing User Code (UC)
To delete an existing User Code, enter the PC, then press the lock/unlock button, then '2', then the lock/unlock button again. Then enter the User Code you want to delete and press the lock/unlock button.
Video: A segment from the official product video showing how to delete an existing User Code (UC) from the lock.
Delete All User Codes (UC) at once
Auto-locking and Keypad locking functions will be invalid when User Codes are deleted. The lock can only be operated by key during that time. To delete all user codes, enter the PC, then press the lock/unlock button, then '3', then the lock/unlock button again.
Video: A segment from the official product video explaining how to delete all User Codes (UC) at once.
ഓട്ടോ-ലോക്ക് ഓൺ/ഓഫ് ടോഗിൾ ചെയ്യുക
The preset delay-time is 30 sec. You can change the time by following instructions in the 'Set Auto-Lock Time Delay' section. To toggle auto-lock, enter the PC, then press the lock/unlock button, then '5', then the lock/unlock button again. Repeat the steps to cancel the auto-locking function.
Video: A segment from the official product video demonstrating how to toggle the auto-lock feature on and off.
ഓട്ടോ-ലോക്ക് സമയ കാലതാമസം സജ്ജമാക്കുക
10 - 99 sec. delay-time available. To set the auto-lock time delay, enter the PC, then press the lock/unlock button, then '6', then the lock/unlock button again. Then enter the desired seconds (10-99) and press the lock/unlock button.
Video: A segment from the official product video showing how to set the auto-lock time delay for the lock.
Enable / Disable All User Codes
Auto-locking and keypad locking functions will be invalid when user codes are disabled. The lock can only be operated by key during the time. To enable/disable all user codes, enter the PC, then press the lock/unlock button, then '8', then the lock/unlock button again. Repeat the steps to enable the user codes again.
Video: A segment from the official product video demonstrating how to enable or disable all user codes.
Create a One-Time User Code
User Codes should be 4-10 digits in length. The one-time user code will automatically cancel after it is used one time. To create a one-time user code, enter the PC, then press the lock/unlock button, then '9', then the lock/unlock button again. Then enter the One Time Code and press the lock/unlock button.
Video: A segment from the official product video showing how to create a one-time user code for temporary access.
മെയിൻ്റനൻസ്
Regular maintenance ensures the longevity and optimal performance of your electronic keypad deadbolt.
- ബാറ്ററി മാറ്റിസ്ഥാപിക്കൽ: Replace all four AA batteries when the low battery indicator appears or when the lock's response becomes sluggish. Always use new, high-quality alkaline batteries.
- വൃത്തിയാക്കൽ: Clean the keypad and lock body with a soft, dry cloth. Avoid abrasive cleaners, solvents, or harsh chemicals that could damage the finish or electronic components.
- ലൂബ്രിക്കേഷൻ: Periodically lubricate the deadbolt latch mechanism with a silicone-based lubricant to ensure smooth operation. Do not lubricate the key cylinder.
- വാതിൽ വിന്യാസം: Ensure your door and frame remain properly aligned. Misalignment can cause the deadbolt to bind, leading to premature wear or malfunction.
ട്രബിൾഷൂട്ടിംഗ്
If you encounter issues with your Amazon Basics Electronic Keypad Deadbolt, refer to the common problems and solutions below.
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| കീപാഡ് പ്രകാശിക്കുന്നില്ല അല്ലെങ്കിൽ പ്രതികരിക്കുന്നില്ല. | ഡെഡ് ബാറ്ററികൾ അല്ലെങ്കിൽ തെറ്റായ ബാറ്ററി ഇൻസ്റ്റാളേഷൻ. | Replace all four AA batteries. Ensure they are inserted with correct polarity. |
| Lock does not lock/unlock electronically. | Incorrect programming code or user code. Door handing not identified. Deadbolt binding due to misalignment. | Verify codes. Perform the Door Handing Identification Process (Step 7). Check door alignment and adjust if necessary. |
| Auto-lock feature is not working. | Auto-lock is disabled or user codes were deleted. | Toggle Auto-Lock On/Off (Step 12) to enable it. If user codes were deleted, re-enable them (Step 14) or restore default settings (Step 16) and re-program. |
| ബീപ് ശബ്ദങ്ങൾ തുടർച്ചയായി ലോക്ക് ചെയ്യുക. | കുറഞ്ഞ ബാറ്ററി മുന്നറിയിപ്പ്. | Replace all four AA batteries immediately. |
സ്പെസിഫിക്കേഷനുകൾ
- ബ്രാൻഡ്: ആമസോൺ അടിസ്ഥാനങ്ങൾ
- മോഡലിൻ്റെ പേര്: PL13910
- ലോക്ക് തരം: കീപാഡ് ഡെഡ്ബോൾട്ട്
- മെറ്റീരിയൽ: വെങ്കലം
- നിറം: Oil Bronze
- ഇനത്തിന്റെ അളവുകൾ (L x W x H): 9.05 x 6.13 x 2.99 ഇഞ്ച്
- ഇനത്തിൻ്റെ ഭാരം: 2.07 പൗണ്ട് (0.94 കിലോഗ്രാം)
- ഊർജ്ജ സ്രോതസ്സ്: 4 x AA 1.5V Alkaline Batteries (not included)
- വാതിൽ കനം അനുയോജ്യത: 1-3/8 മുതൽ 1-3/4 ഇഞ്ച് വരെ
- ബാക്ക്സെറ്റ്: Adjustable 2-3/8 inches (60mm) or 2-3/4 inches (70mm)
- പ്രത്യേക സവിശേഷതകൾ: Alarm, Keyless Entry, Auto-locking, Customizable User Codes, One-Time User Codes
- ഉൾപ്പെടുത്തിയ ഘടകങ്ങൾ: Latch, strikes, screws pack
വാറൻ്റിയും പിന്തുണയും
This Amazon Basics product is backed by a limited warranty. For specific warranty details, please refer to the warranty document provided with your purchase or visit the official Amazon Basics webസൈറ്റ്.
For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Amazon Basics customer service through your Amazon account or the contact information provided on the product packaging.
നിങ്ങൾക്ക് കൂടുതൽ ഉറവിടങ്ങളും പതിവുചോദ്യങ്ങളും ഇവിടെ കണ്ടെത്താനാകും ആമസോൺ ബേസിക്സ് സ്റ്റോർ.
