1. ആമുഖം
This manual provides detailed instructions for the installation, operation, and maintenance of your LoraTap Mini Wireless Remote Control Outlet Plug Adapter. This device is designed to provide convenient wireless control for household appliances, offering ease of use and flexibility.
1.1 പാക്കേജ് ഉള്ളടക്കം
- 1 x LoraTap Mini Wireless Remote Control Outlet Plug Adapter
- 2 x LoraTap Wireless Remote Controls
- 2 x CR2032 Batteries (pre-installed in remotes)
- Adhesive Mounting Squares (for remote base)
Image 1.1: LoraTap Mini Wireless Remote Control Outlet Plug Adapter with two remotes.
The image above displays the main components included in your package: one plug adapter and two remote controls. The remote controls are circular with 'ON' and 'OFF' buttons, and the plug adapter is compact with a standard US three-prong plug.
2 സുരക്ഷാ വിവരങ്ങൾ
- Do not exceed the maximum load capacity of 10 Amps or 1100 Watts. Overloading can cause damage to the device and potential fire hazards.
- This device is designed for indoor use only. Avoid exposure to moisture, extreme temperatures, or direct sunlight.
- Ensure the plug adapter is fully inserted into a grounded electrical outlet.
- ഉപകരണം ഡിസ്അസംബ്ലിംഗ് ചെയ്യുകയോ പരിഷ്കരിക്കുകയോ ചെയ്യരുത്. എല്ലാ സേവനങ്ങളും യോഗ്യതയുള്ള ഉദ്യോഗസ്ഥരെ ഏൽപ്പിക്കുക.
- കുട്ടികൾക്ക് ലഭ്യമാകാതെ സൂക്ഷിക്കുക.
3. സജ്ജീകരണ നിർദ്ദേശങ്ങൾ
3.1 അൺപാക്കിംഗ്
പാക്കേജിംഗിൽ നിന്ന് എല്ലാ ഘടകങ്ങളും ശ്രദ്ധാപൂർവ്വം നീക്കം ചെയ്യുക. എന്തെങ്കിലും കേടുപാടുകൾ സംഭവിച്ചിട്ടുണ്ടോയെന്ന് പരിശോധിക്കുക. ഏതെങ്കിലും ഘടകങ്ങൾക്ക് കേടുപാടുകൾ സംഭവിച്ചിട്ടുണ്ടെങ്കിലോ നഷ്ടപ്പെട്ടിട്ടുണ്ടെങ്കിലോ, ഉപഭോക്തൃ പിന്തുണയുമായി ബന്ധപ്പെടുക.
3.2 Initial Placement and Powering On
- Plug the LoraTap Mini Wireless Remote Control Outlet Plug Adapter into a standard 110V AC grounded wall outlet.
- Connect the appliance you wish to control into the LoraTap plug adapter. Ensure the appliance's power switch is in the 'ON' position if it has one.
Image 3.1: Visual guide for the initial setup process. This image illustrates opening the package, plugging the device into a wall outlet, and then using the remote control to operate the connected appliance.
3.3 Pairing (Pre-paired from Factory)
Your LoraTap Mini Wireless Remote Control Outlet Plug Adapter and remotes are pre-paired at the factory. No additional pairing steps are required before initial use. Simply plug in the outlet and use the remote to control your appliance.
4. പ്രവർത്തന നിർദ്ദേശങ്ങൾ
4.1 Basic On/Off Control
To turn the connected appliance ON, press the 'ON' button on the remote control. To turn it OFF, press the 'OFF' button. A blue LED indicator on the plug adapter will illuminate when the power is ON.
4.2 Remote Placement and Portability
The remote control features a magnetic base, allowing it to be mounted on magnetic surfaces like refrigerators or on the included magnetic plate base. The magnetic plate can be fixed to a wall using the provided adhesive tape. The remote can also be easily removed from its base for portable use, functioning as a handheld wireless switch.
Image 4.1: The remote control's versatility, showing it placed on a bedside table, a coffee table, a sofa armrest, and magnetically attached to a refrigerator, highlighting its portability and ease of access.
Image 4.2: A couple relaxing on a sofa, with LoraTap remotes mounted on the wall behind them, demonstrating how the RF remote control can operate a lamp connected to the plug adapter.
5 പ്രധാന സവിശേഷതകൾ
5.1 റിമോട്ട് കൺട്രോൾ ശ്രേണി
The LoraTap system utilizes a 915MHz RF wireless signal, providing a strong and reliable connection. The indoor wireless control range extends up to 100 feet (30 meters), and the outdoor range can reach up to 656 feet (200 meters) in open areas. The signal is capable of penetrating walls, windows, and ceilings without interfering with other electronic devices.
Image 5.1: This diagram visually represents the 'Super Remote Control Distance' feature, showing the wireless signal from the remote controls passing through a brick wall to operate the plug adapter, indicating its ability to work through obstacles.
5.2 മെമ്മറി പ്രവർത്തനം
The LoraTap wireless plug-in receiver is equipped with a memory function. In the event of a power outage, the outlet will retain its last ON/OFF state once power is restored. For example, if the appliance was OFF before a power failure, it will remain OFF after power returns, contributing to energy saving.
Image 5.2: This image illustrates the 'Outlet with Memory Function' by showing a lamp's state before a power failure (on), during a power failure (off), and after power is restored (remaining off), demonstrating that the outlet remembers its last state.
5.3 Non-Interference
Each LoraTap remote control and outlet kit has a unique ID. This design ensures that multiple LoraTap wireless plug outlet kits can operate in the same area or room without signal interference between them.
Image 5.3: This diagram demonstrates the 'No Interference' feature, showing two distinct LoraTap plug adapters (A and B) each paired with their respective remote controls (A1, A2 and B1, B2), indicating that they can operate simultaneously without signal conflict.
6. പരിപാലനം
6.1 ബാറ്ററി മാറ്റിസ്ഥാപിക്കൽ
The remote control is powered by a CR2032 coin cell battery. When the remote's performance diminishes or it stops responding, it may be time to replace the battery. To replace the battery:
- Gently twist the back cover of the remote control counter-clockwise to open it.
- പഴയ CR2032 ബാറ്ററി നീക്കം ചെയ്യുക.
- പോസിറ്റീവ് (+) വശം മുകളിലേക്ക് അഭിമുഖീകരിക്കുന്ന ഒരു പുതിയ CR2032 ബാറ്ററി ഇടുക.
- പിൻ കവർ വിന്യസിച്ച് അത് ഉറപ്പിക്കാൻ ഘടികാരദിശയിൽ തിരിക്കുക.
Image 6.1: This image details the 'Mountable and Movable' remote control, illustrating its magnetic base, the location of the CR2032 battery, and how to open the remote for battery replacement.
6.2 വൃത്തിയാക്കൽ
To clean the device, wipe it with a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as these may damage the product.
7. പ്രശ്നപരിഹാരം
- ഉപകരണം പ്രതികരിക്കുന്നില്ല:
a. Ensure the plug adapter is securely plugged into a live outlet.
b. Verify the appliance connected to the adapter is powered on and functioning correctly.
c. Check the battery in the remote control and replace if necessary. - പരിമിതമായ ശ്രേണി:
a. Ensure there are no major obstructions (e.g., thick concrete walls, large metal objects) between the remote and the plug adapter.
b. Move the remote closer to the plug adapter to test if the range improves. - മറ്റ് ഉപകരണങ്ങളുമായുള്ള ഇടപെടൽ:
The LoraTap system is designed to prevent interference. If you experience issues, ensure no other wireless devices are operating on the same frequency or are too close to the LoraTap units.
8 സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | സ്പെസിഫിക്കേഷൻ |
|---|---|
| മോഡൽ നമ്പർ | SP121SC-US-915 |
| ഓപ്പറേറ്റിംഗ് വോളിയംtage | 110 വോൾട്ട് (എസി) |
| നിലവിലെ റേറ്റിംഗ് | 10 Amps |
| ലോഡ് പവർ | പരമാവധി 1100 വാട്ട്സ് |
| വയർലെസ് ഫ്രീക്വൻസി | 915MHz RF |
| ഇൻഡോർ റേഞ്ച് | 100 അടി വരെ (30 മീറ്റർ) |
| Do ട്ട്ഡോർ ശ്രേണി | 656 അടി വരെ (200 മീറ്റർ) |
| റിമോട്ട് ബാറ്ററി തരം | CR2032 (ഉൾപ്പെടുന്നു) |
| ഉൽപ്പന്ന അളവുകൾ (ഔട്ട്ലെറ്റ്) | 1.85 x 1.85 x 1.14 ഇഞ്ച് |
| ഉൽപ്പന്ന അളവുകൾ (റിമോട്ട്) | 2.68 inch diameter, 0.63 inch thickness |
| ഓപ്പറേഷൻ മോഡ് | ഓൺ-ഓഫ്-ഓൺ |
| ബന്ധപ്പെടാനുള്ള തരം | സാധാരണയായി തുറന്നിരിക്കുന്നു |
| സർട്ടിഫിക്കേഷനുകൾ | FCC, CE, RoHS |
Image 8.1: This image provides detailed dimensions for both the remote control and the plug adapter, including their height, width, and depth, and reiterates the maximum load power of 1100W and 10A.
9. വാറൻ്റിയും പിന്തുണയും
9.1 ഉൽപ്പന്ന വാറന്റി
The LoraTap Mini Wireless Remote Control Outlet Plug Adapter comes with a 2-year warranty from the date of purchase. This warranty covers manufacturing defects and ensures the product functions as intended under normal use. Please retain your proof of purchase for warranty claims.
9.2 ഉപഭോക്തൃ പിന്തുണ
For technical assistance, troubleshooting, or warranty inquiries, please contact LoraTap customer support through the retailer's platform or the official LoraTap website. Please have your model number (SP121SC-US-915) and purchase date available when contacting support.
