KPS Stainless Steel Rolling Equipment Stand Instruction Manual

ആമുഖം

Thank you for choosing the KPS Stainless Steel Rolling Equipment Stand. This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your new equipment stand. Please read this manual thoroughly before use and retain it for future reference.

ഉൽപ്പന്നം കഴിഞ്ഞുview

The KPS Stainless Steel Rolling Equipment Stand is designed for versatility and durability, suitable for various work environments. It features a robust stainless steel top and an adjustable galvanized steel undershelf, supported by sturdy galvanized legs with casters for mobility.

Figure 1: KPS Stainless Steel Rolling Equipment Stand, showing the top shelf, undershelf, legs, and casters.

പ്രധാന സവിശേഷതകൾ:

• Durable Stainless Steel Top: The 16-gauge stainless steel top measures 30 inches deep by 24 inches long and can support up to 700 lbs of evenly distributed weight. It is easy to clean and maintain.
• Galvanized Steel Undershelf: Provides additional storage, supporting up to 540 lbs. This shelf is adjustable to optimize space.
• Side and Back Edging: A 2-inch high edging on the top shelf helps contain items, preventing them from falling.
• Sturdy Galvanized Steel Legs: Four legs provide stability and elevate the stand to a comfortable working height.
• Casters with Bullet Feet: Equipped with casters for mobility, featuring bullet feet to ensure a stationary position when needed. Two casters include brakes for secure placement.

Figure 2: Dimensional diagram of the stand, indicating 30" depth, 24" length, 2" edging, and overall height.

സുരക്ഷാ വിവരങ്ങൾ

Please observe the following safety guidelines to prevent injury and damage to the equipment stand:

• Do not exceed the maximum weight capacity of 700 lbs for the top shelf and 540 lbs for the undershelf. Distribute weight evenly.
• Ensure all casters are locked when the stand needs to remain stationary to prevent accidental movement.
• Avoid placing hot items directly on the stainless steel surface without adequate protection.
• അസംബ്ലി ചെയ്യുമ്പോഴും പ്രവർത്തിപ്പിക്കുമ്പോഴും കുട്ടികളെയും വളർത്തുമൃഗങ്ങളെയും സ്റ്റാൻഡിൽ നിന്ന് അകറ്റി നിർത്തുക.
• Regularly inspect the stand for any loose components or damage. Do not use if damaged.

സജ്ജീകരണവും അസംബ്ലിയും

The KPS Stainless Steel Rolling Equipment Stand is designed for minimal assembly. While the main frame is largely pre-assembled, the casters and undershelf require attachment and adjustment.

ആവശ്യമായ ഉപകരണങ്ങൾ:

• Adjustable wrench or appropriate sized spanner for casters.

അസംബ്ലി ഘട്ടങ്ങൾ:

1. കാസ്റ്ററുകൾ ഘടിപ്പിക്കുക: Carefully turn the stand upside down. Insert the stem of each caster into the designated holes at the bottom of each leg. Secure them by tightening the nuts with an adjustable wrench. Ensure casters with brakes are positioned on the same side for easier access.
2. Adjust Undershelf: Turn the stand upright. The undershelf can be adjusted to your desired height. Loosen the screws or clips securing the undershelf to the legs, slide the shelf to the preferred position, and then securely tighten the fasteners. Ensure the shelf is level.
3. അന്തിമ പരിശോധന: Verify that all components are securely fastened and the stand is stable.

ചിത്രം 3: മുൻഭാഗം view of the assembled stand, showing the casters and undershelf.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

സ്റ്റാൻഡ് നീക്കൽ:

• To move the stand, ensure all caster brakes are disengaged.
• Gently push or pull the stand to its desired location. Avoid sudden movements or excessive force.

Securing the Stand:

• Once the stand is in position, engage the brakes on the two locking casters by pressing down on the lever.
• Verify that the stand is stable and does not move before placing equipment or items on it.

Loading the Stand:

• Distribute weight evenly across both the top shelf and the undershelf.
• Do not exceed the stated weight capacities for each shelf.
• Utilize the 2-inch edging on the top shelf to help contain items and prevent them from sliding off.

Figure 4: The stand in a kitchen environment, demonstrating its use for various appliances.

പരിപാലനവും പരിചരണവും

Cleaning Stainless Steel Surfaces:

• Wipe down stainless steel surfaces regularly with a soft cloth and mild detergent or a specialized stainless steel cleaner.
• Always wipe in the direction of the grain to prevent streaks and scratches.
• അബ്രാസീവ് ക്ലീനറുകൾ, സ്റ്റീൽ കമ്പിളി, അല്ലെങ്കിൽ കഠിനമായ രാസവസ്തുക്കൾ എന്നിവ ഒഴിവാക്കുക, കാരണം ഇവ ഫിനിഷിന് കേടുവരുത്തും.
• For stubborn stains, a paste of baking soda and water can be used, followed by thorough rinsing and drying.

കാസ്റ്റർ മെയിന്റനൻസ്:

• Periodically check casters for debris (hair, lint, etc.) and clean as needed to ensure smooth rolling.
• Ensure caster brakes are functioning correctly.

പൊതു പരിശോധന:

• Regularly check all bolts and fasteners to ensure they are tight. Tighten if necessary.
• Inspect the legs and shelves for any signs of damage or corrosion.

Figure 5: Detail of the stainless steel top surface and its protective edging.

ബഹുമുഖ ആപ്ലിക്കേഷനുകൾ

The KPS Stainless Steel Rolling Equipment Stand is designed for adaptability across various environments, providing a robust and mobile work surface or storage solution.

Figure 6: Stand utilized in a garage setting, supporting various power tools.

Figure 7: Stand serving as an auxiliary surface in a kitchen, holding a mixer and other small appliances.

Figure 8: Stand providing additional surface and storage in a laundry room, holding folded towels.

ട്രബിൾഷൂട്ടിംഗ്

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റിയും പിന്തുണയും

For warranty information or technical support regarding your KPS Stainless Steel Rolling Equipment Stand, please contact the manufacturer or your point of purchase. Keep your purchase receipt as proof of purchase.

Manufacturer: KPS