ROBOTIME ROKR T-Rex Dinosaur Walking Mechanical Wooden Model Kit D210

ആമുഖം

Welcome to the instruction manual for your ROBOTIME ROKR T-Rex Dinosaur Walking Mechanical Wooden Model Kit. This kit provides an engaging and educational experience, allowing you to construct a detailed, walking mechanical T-Rex model from precision-cut wooden pieces. Please read this manual thoroughly before beginning assembly to ensure a smooth and enjoyable building process.

Image: The fully assembled ROBOTIME ROKR T-Rex mechanical wooden model.

സുരക്ഷാ വിവരങ്ങൾ

ഇനിപ്പറയുന്ന സുരക്ഷാ മുൻകരുതലുകൾ പാലിക്കുക:

• ഈ ഉൽപ്പന്നത്തിൽ ചെറിയ ഭാഗങ്ങൾ അടങ്ങിയിരിക്കുന്നു, ശ്വാസംമുട്ടൽ അപകടങ്ങൾ കാരണം 3 വയസ്സിന് താഴെയുള്ള കുട്ടികൾക്ക് ഇത് അനുയോജ്യമല്ല.
• അസംബ്ലി സമയത്ത് മുതിർന്നവരുടെ മേൽനോട്ടം ശുപാർശ ചെയ്യുന്നു, പ്രത്യേകിച്ച് പ്രായം കുറഞ്ഞ നിർമ്മാതാക്കൾക്ക്.
• Handle wooden pieces carefully to avoid splinters.
• തുറന്ന തീജ്വാലകളിൽ നിന്നോ അമിതമായ ചൂടിൽ നിന്നോ അകന്നു നിൽക്കുക.
• Do not force pieces together; if a piece does not fit, re-check the instructions.

പാക്കേജ് ഉള്ളടക്കം

Before starting assembly, please verify that all components are present:

• Pre-cut wooden sheets with model parts.
• ഇൻസ്ട്രക്ഷൻ മാനുവൽ.
• Small accessories (e.g., gears, shafts, springs, sandpaper, wax, screwdriver if applicable).

Image: The retail packaging for the ROBOTIME ROKR T-Rex D210 model kit.

അസംബ്ലി നിർദ്ദേശങ്ങൾ

Follow these steps carefully to assemble your T-Rex model. Refer to the diagrams in your physical instruction booklet for detailed visual guidance.

1. തയ്യാറാക്കൽ: Carefully remove all wooden pieces from their sheets. Use the included sandpaper to smooth any rough edges if necessary. Identify all parts according to the numbering in the instruction booklet.
2. അടിസ്ഥാന അസംബ്ലി: Begin by assembling the base structure of the T-Rex, typically starting with the main body frame. Ensure all interlocking tabs fit snugly.
3. Legs and Tail: Attach the leg mechanisms and tail sections. Pay close attention to the orientation of gears and connecting rods for proper walking motion. Lubricate moving parts with the provided wax as instructed.
4. Head and Jaws: Assemble the head, including the jaw mechanism. Ensure the roaring function (if applicable) is correctly integrated.
5. Motor and Wiring (if applicable): If your model includes an electric motor, carefully follow the wiring diagrams to connect it to the battery compartment and internal mechanisms. Ensure correct polarity.
6. അന്തിമ അസംബ്ലി: Connect all major sections. Test the movement of joints and gears as you proceed to ensure smooth operation.
7. പരിശോധന: Once fully assembled, test the walking and roaring functions. If the model does not move smoothly, re-check the connections and ensure all parts are properly aligned and lubricated.

കുറിപ്പ്: The complexity level for this model is indicated as Level: ★★★☆☆ and it contains 85 കഷണങ്ങൾ, suggesting a moderate challenge suitable for ages 12+.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Once assembled, your ROBOTIME ROKR T-Rex is ready for action:

• ഊർജ്ജ സ്രോതസ്സ്: Insert the required batteries (not included) into the designated battery compartment, observing correct polarity.
• സജീവമാക്കൽ: Locate the power switch, usually on the base or side of the model. Flip the switch to the "ON" position.
• Walking Function: The T-Rex should begin to walk forward. If movement is erratic, ensure it is on a flat, smooth surface.
• Roaring Function: The model is designed to roar. This function is typically synchronized with its movement or activated by a specific sensor (e.g., clapping, as suggested by the box art). Clap your hands near the model to activate the roaring sound.
• നിർജ്ജീവമാക്കൽ: To turn off the model, flip the power switch to the "OFF" position. Remove batteries if storing for extended periods.

മെയിൻ്റനൻസ്

To ensure the longevity and smooth operation of your wooden model:

• വൃത്തിയാക്കൽ: Dust the model regularly with a soft, dry cloth. Do not use water or chemical cleaners, as they may damage the wood.
• ലൂബ്രിക്കേഷൻ: Periodically apply a small amount of the provided wax (or a suitable alternative like paraffin wax) to moving wooden gears and joints to maintain smooth operation.
• സംഭരണം: Store the model in a dry place away from direct sunlight and extreme temperature fluctuations to prevent warping or damage to the wood.
• ബാറ്ററി കെയർ: Remove batteries if the model will not be used for an extended period to prevent leakage.

ട്രബിൾഷൂട്ടിംഗ്

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റിയും പിന്തുണയും

For any questions regarding assembly, missing parts, or operational issues, please contact ROBOTIME customer support. While specific warranty details are not provided in this manual, most products come with a standard manufacturer's warranty against defects.

Please visit the official ROBOTIME website or refer to the contact information provided on the product packaging for assistance.

കുറിപ്പ്: ഏതെങ്കിലും വാറന്റി ക്ലെയിമുകൾക്ക് വാങ്ങിയതിന്റെ തെളിവായി നിങ്ങളുടെ വാങ്ങൽ രസീത് സൂക്ഷിക്കുക.