BOYA BY-BM3031 Supercardioid Condenser Microphone Instruction Manual

ആമുഖം

The BOYA BY-BM3031 is a broadcast-quality supercardioid condenser shotgun microphone designed to capture clear, high-quality audio. It is suitable for use with DSLRs, camcorders, and audio recorders, making it ideal for videographers, sound designers, and film producers in various indoor and outdoor recording scenarios.

This manual provides detailed instructions on the setup, operation, maintenance, and troubleshooting of your BY-BM3031 microphone to ensure optimal performance and longevity.

പാക്കേജ് ഉള്ളടക്കം

Upon unboxing your BOYA BY-BM3031, please verify that all the following components are included:

• BY-BM3031 മൈക്രോഫോൺ
• ഫോം വിൻഡ്സ്ക്രീൻ
• Fur Windscreen (Windjammer)
• ചുമക്കുന്ന സഞ്ചി
• ഉപയോക്തൃ മാനുവൽ (ഈ പ്രമാണം)

Note: Two AA batteries are required for operation and are sold separately.

പ്രധാന സവിശേഷതകൾ

• Supercardioid Polar Pattern: Focuses audio capture directly in front of the microphone, reducing side and rear noise.
• Three-level Gain Switch: Provides options for +20 dB boost, 0 dB unity gain, or -10 dB pad to prevent distortion from audio overload.
• Switchable High-Pass Filter (80 Hz): Helps to roll off unwanted low-frequency noise and rumble, such as air conditioning or traffic sounds.
• Integrated Shockmount: Designed to eliminate vibrations and handling noise, ensuring cleaner audio recordings.
• 1/8" (3.5 mm) Headphone Monitor Jack: Allows real-time audio monitoring directly from the microphone, preventing recording errors.
• ഈടുനിൽക്കുന്ന ABS നിർമ്മാണം: Ensures robust and long-lasting performance.
• ബാറ്ററി പവർ: Operates on two AA batteries for portable use.

സജ്ജീകരണ ഗൈഡ്

1. ബാറ്ററികൾ ഇൻസ്റ്റാൾ ചെയ്യുന്നു

The BY-BM3031 requires two AA batteries for operation. Ensure the microphone is turned off before installing or replacing batteries.

1. Locate the battery compartment on the underside of the microphone body.
2. ബാറ്ററി കമ്പാർട്ട്മെൻ്റ് കവർ തുറക്കുക.
3. കമ്പാർട്ടുമെന്റിനുള്ളിൽ സൂചിപ്പിച്ചിരിക്കുന്നതുപോലെ ശരിയായ പോളാരിറ്റി (+/-) നിരീക്ഷിച്ചുകൊണ്ട് രണ്ട് AA ബാറ്ററികൾ ഇടുക.
4. ബാറ്ററി കമ്പാർട്ട്മെൻ്റ് കവർ സുരക്ഷിതമായി അടയ്ക്കുക.

Image: The battery compartment of the BY-BM3031 microphone, showing the correct orientation for inserting two AA batteries.

2. Attaching to Camera/Device

The microphone features an integrated cold shoe mount with a 1/4"-20 threaded mount for versatile attachment.

1. Slide the microphone's cold shoe mount into your camera's hot shoe or cold shoe adapter.
2. Tighten the locking wheel on the microphone's mount to secure it in place.
3. Alternatively, use the 1/4"-20 thread to mount the microphone onto a tripod, boom pole, or stand.

Image: The BY-BM3031 microphone securely mounted on a DSLR camera, ready for recording.

3. Connecting to Audio Input

The BY-BM3031 comes with an integrated 1/8" (3.5 mm) coiled cable for connecting to your recording device.

1. Plug the 3.5 mm connector of the microphone's coiled cable into the microphone input jack of your DSLR, camcorder, or audio recorder.
2. Ensure the connection is firm to avoid audio dropouts.

Image: The BY-BM3031 microphone with its integrated coiled 3.5mm cable, ready for connection.

4. Attaching Windscreen

Use the appropriate windscreen based on your recording environment.

• ഫോം വിൻഡ്സ്ക്രീൻ: Ideal for indoor use or light wind conditions to reduce plosives and breath noise. Slide it over the microphone capsule.
• Fur Windscreen (Windjammer): Recommended for outdoor use or windy conditions to significantly reduce wind noise. Slide it over the foam windscreen for best results.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

1. പവർ ഓൺ/ഓഫ്

Locate the power switch on the microphone body. Slide it to the "ON" position to power on the microphone. Slide it to "OFF" when not in use to conserve battery life.

2. ഗെയിൻ കൺട്രോൾ ക്രമീകരിക്കൽ

The BY-BM3031 features a three-position gain control switch to optimize your audio levels. Adjust this based on the loudness of your sound source and the input sensitivity of your recording device.

• +20 ഡിബി: Use this setting for quiet sound sources or when your recording device's input is low. This boosts the microphone's output.
• 0 ഡിബി: This is the standard, unity gain setting, suitable for most general recording situations.
• -10 ഡിബി: Use this pad setting for very loud sound sources to prevent audio clipping and distortion.

ചിത്രം: ക്ലോസ്-അപ്പ് view of the gain control and high-pass filter switches on the BY-BM3031.

3. Using the High-Pass Filter

The high-pass filter (HPF) helps to eliminate unwanted low-frequency noise. It has two settings:

• ഫ്ലാറ്റ്: No filter applied. Use when you want to capture the full frequency range of your audio.
• 80 ഹെർട്സ്: Activates the high-pass filter at 80 Hz. This is useful for reducing rumble from air conditioners, traffic, or handling noise.

4. ഓഡിയോ മോണിറ്ററിംഗ്

The 3.5 mm headphone jack on the microphone allows you to monitor your audio in real-time. This is crucial for ensuring proper levels and sound quality during recording.

1. Plug your headphones into the 3.5 mm headphone jack on the rear panel of the microphone.
2. Listen carefully to the audio being recorded. Adjust the gain control and high-pass filter as needed to achieve clear, undistorted sound.

Image: The BY-BM3031 in use during a studio recording session, demonstrating its application.

Image: The BY-BM3031 capturing audio during a musical performance.

Image: The BY-BM3031 used for recording at an event.

Image: The BY-BM3031 capturing audio during a presentation or lecture.

മെയിൻ്റനൻസ്

Proper maintenance will extend the life and performance of your BY-BM3031 microphone.

• വൃത്തിയാക്കൽ: Use a soft, dry cloth to wipe the microphone body. Do not use harsh chemicals or abrasive cleaners.
• സംഭരണം: When not in use, store the microphone in its carrying pouch to protect it from dust, moisture, and physical damage.
• ബാറ്ററികൾ: Remove batteries if the microphone will not be used for an extended period to prevent leakage and damage.
• ഈർപ്പം ഒഴിവാക്കുക: മൈക്രോഫോൺ വെള്ളത്തിൽ നിന്നും ഉയർന്ന ആർദ്രതയിൽ നിന്നും അകറ്റി നിർത്തുക.
• ശ്രദ്ധയോടെ കൈകാര്യം ചെയ്യുക: മൈക്രോഫോൺ താഴെയിടുകയോ ശക്തമായ ആഘാതങ്ങൾക്ക് വിധേയമാക്കുകയോ ചെയ്യുന്നത് ഒഴിവാക്കുക.

ട്രബിൾഷൂട്ടിംഗ്

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റിയും പിന്തുണയും

BOYA products are designed and manufactured to high-quality standards. For specific warranty information and support, please refer to the warranty card included with your product or visit the official BOYA webസൈറ്റ്.

Spare parts for this product are available for a duration of 2 years within the EU.

For technical assistance or service inquiries, please contact BOYA customer support through their official channels.