EMKE Design Radiator Instruction Manual

1. ഉൽപ്പന്നം കഴിഞ്ഞുview

This manual provides essential information for the installation, operation, and maintenance of your EMKE Design Radiator, Model FR6310A-DR. This horizontal panel radiator is designed for efficient heating in residential spaces.

പ്രധാന സവിശേഷതകൾ:

• അളവുകൾ: 630 x 1000 mm (Height x Width)
• ഹീറ്റ് ഔട്ട്പുട്ട്: 730 W
• Number of Tubes: 13
• ശുപാർശ ചെയ്യുന്ന ഏരിയ: 6 m² വരെ
• പാളികൾ: Single-layer design
• ഭാരം: 19 കി.ഗ്രാം
• മെറ്റീരിയൽ: High-quality SPCC steel, compliant with BS EN 442 standard, CE certified
• കണക്ഷൻ: Side connection (left), G1/2" thread, 50 mm connection size, 55mm distance from wall

Figure 1: EMKE Design Radiator (630x1000mm, Anthracite)

2. പാക്കേജ് ഉള്ളടക്കം

ഇൻസ്റ്റാളേഷൻ ആരംഭിക്കുന്നതിന് മുമ്പ്, എല്ലാ ഘടകങ്ങളും നിലവിലുണ്ടെന്നും കേടുപാടുകൾ സംഭവിച്ചിട്ടില്ലെന്നും ദയവായി പരിശോധിക്കുക.

• EMKE Design Panel Radiator
• Mounting Kit (includes blind plugs, long screws, rubber rings, rubber pads)
• ഇൻസ്റ്റലേഷൻ നിർദ്ദേശങ്ങൾ (ഈ മാനുവൽ)

Note: Valves are not included and must be purchased separately.

Figure 2: Included Accessories and Packaging Layers

3. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

Installation should be performed by a qualified professional to ensure safety and proper function. Always turn off the main water supply before beginning any work.

3.1 പ്രധാന പരിഗണനകൾ

• Ensure the wall material is suitable to support the radiator's weight (19 kg plus water).
• Accurate measurements are crucial for correct mounting. Refer to the technical drawing for precise dimensions and connection points.
• The radiator is designed for hot water central heating systems.

3.2 കണക്ഷൻ ഓപ്ഷനുകൾ

The radiator offers flexible connection options:

• Side Connection (Left): This is the standard configuration. It can use either a split valve or a connected valve.
• Connection at Both Ends: The four corners of the radiator can also be used for water inlet and outlet. For this method, a split valve must be used.

Figure 3: Radiator Connection Methods

3.3 കണക്ഷൻ സ്പെസിഫിക്കേഷനുകൾ

• കണക്ഷൻ ത്രെഡ്: ജി1/2"
• കണക്ഷൻ ദൂരം: 50 മി.മീ
• Distance from Interface to Wall: 55 മി.മീ

Figure 4: Connection Thread and Distance

3.4 സാങ്കേതിക ഡ്രോയിംഗ്

Consult the technical drawing for detailed measurements and mounting points. Precise measurement before drilling is essential.

Figure 5: Technical Drawing with Dimensions

4. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The EMKE Design Radiator operates as part of a hot water central heating system, distributing heat through convection.

4.1 Heating Principle

Hot water circulates through the radiator panels, transferring heat to the surrounding air. This creates a comfortable and even warmth in the room.

Figure 6: Hot Water Heating Principle

4.2 താപനില നിയന്ത്രണം

Temperature control is managed by external valves (not included) connected to your central heating system. Adjust these valves to regulate the heat output of the radiator.

5. പരിപാലനം

പതിവ് അറ്റകുറ്റപ്പണികൾ നിങ്ങളുടെ റേഡിയേറ്ററിന്റെ ഒപ്റ്റിമൽ പ്രകടനവും ദീർഘായുസ്സും ഉറപ്പാക്കുന്നു.

5.1 വൃത്തിയാക്കൽ

• Wipe the radiator surface with a soft, damp തുണി.
• Avoid abrasive cleaners or harsh chemicals, as these can damage the anthracite finish.
• Do not use metal objects for cleaning, as the paint finish is sensitive and can chip.

5.2 Bleeding the Radiator

If your radiator is not heating evenly or makes gurgling noises, it may contain trapped air. Bleed the radiator periodically using a radiator key (not included) to release air and improve efficiency.

6. പ്രശ്‌നപരിഹാരം

This section addresses common issues you might encounter with your EMKE Design Radiator.

6.1 Radiator Not Heating

• വാൽവുകൾ പരിശോധിക്കുക: Ensure both inlet and outlet valves are fully open.
• ബ്ലീഡ് എയർ: Trapped air can prevent proper heating. Bleed the radiator as described in the Maintenance section.
• സിസ്റ്റം മർദ്ദം: Verify that your central heating system's pressure is within the recommended range.

6.2 അസമമായ ചൂടാക്കൽ

• ബ്ലീഡ് എയർ: Uneven heating, especially a cold top and warm bottom, often indicates trapped air.
• ബാലൻസ്: Your heating system may need balancing. Consult a heating engineer for this procedure.

6.3 ചോർച്ച

• കണക്ഷനുകൾ പരിശോധിക്കുക: Ensure all pipe connections are tight. Do not overtighten.
• Valve Issues: Inspect valves for any signs of leakage.
• If a leak persists, immediately turn off the water supply to the radiator and contact a qualified plumber.

7 സ്പെസിഫിക്കേഷനുകൾ

Figure 7: Actual Size Comparison (Note: Please measure your installation space before purchase)

8. വാറൻ്റിയും പിന്തുണയും

EMKE products are manufactured to high-quality standards and comply with EN442 norms.

8.1 വാറൻ്റി വിവരങ്ങൾ

Specific warranty details for your EMKE Design Radiator are typically provided at the point of purchase or can be found on the official EMKE webസൈറ്റ്. ഏതെങ്കിലും വാറന്റി ക്ലെയിമുകൾക്കായി നിങ്ങളുടെ വാങ്ങലിന്റെ തെളിവ് സൂക്ഷിക്കുക.

8.2 ഉപഭോക്തൃ പിന്തുണ

For technical assistance, installation queries, or other support needs, please refer to the contact information provided by your retailer or visit the official EMKE website. You can find more information about EMKE products and support at EMKE Brand Store.