KFI 66" UTV Steel Blade Snow Plow Kit for CF-Moto ZFORCE 500 800 800EX ('14-20) - Instruction Manual

ആമുഖം

This manual provides detailed instructions for the installation, operation, and maintenance of your KFI 66" UTV Steel Blade Snow Plow Kit. Designed for CF-Moto ZFORCE 500, 800, and 800EX models from 2014-2020, this plow system is engineered for durability and efficient snow removal. Please read all instructions carefully before assembly and use to ensure safe and proper functionality.

പ്രധാന സവിശേഷതകൾ:

• 100% യുഎസ്എയിൽ നിർമ്മിച്ചത്
• Includes 66" Steel Plow, Push Tubes, and CF-Moto ZFORCE Plow Mount
• Blade constructed of 11 gauge steel
• 2-Sided 3/16" x 3.00" Grade 50 Steel Wear Bar

സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

The KFI Pro-Series Plow System is designed as a Front-Mount System, transferring plowing forces to the front lower frame of your UTV. The system attaches in seconds using two standard 5/8" hitch pins, providing over 30 inches of lift height. All components are shot blasted and powder coated for a durable finish.

ഘടകം കഴിഞ്ഞുview:

ചിത്രം: കഴിഞ്ഞുview of the KFI 66" Steel Blade Snow Plow Kit components, including the blade, push tubes, and mounting hardware.

ഇൻസ്റ്റലേഷൻ ഘട്ടങ്ങൾ:

1. മൗണ്ടിംഗ് പ്ലേറ്റ് ഇൻസ്റ്റാളേഷൻ: Secure the mounting plate to the underside of your UTV's frame using the provided U-bolts and hardware. Ensure a snug fit to prevent movement during operation. Refer to the specific instructions for your CF-Moto ZFORCE model for precise mounting points.

Image: Close-up of the KFI UTV plow mounting plate with U-bolts and nuts.
2. Push Tube Assembly: Attach the push tubes to the mounting plate. These tubes provide the structural support and connection between the plow blade and your UTV. Use the provided pins and clips for a secure connection.


Image: KFI UTV plow push tube assembly with springs and pins.

3. ബ്ലേഡ് അറ്റാച്ച്മെൻ്റ്: Connect the 66" steel blade to the push tube assembly. Ensure all pivot points are correctly aligned and secured with the appropriate pins. The blade features a 2-sided 3/16" x 3.00" Grade 50 Steel Wear Bar for extended life.

Image: The KFI 66" steel plow blade with warning label and spring-loaded trip mechanism.
4. Winch Connection (if applicable): If using a winch for lifting, connect the winch cable to the plow assembly. Ensure the winch is properly installed on your UTV and capable of handling the plow's weight and operating forces.

ഇൻസ്റ്റലേഷൻ വീഡിയോ റഫറൻസ്:

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Before operating the snow plow, ensure all connections are secure and the UTV is in good working condition. Always wear appropriate safety gear.

1. Plow Angle Adjustment: The plow blade can be adjusted to various angles for optimal snow displacement. Consult your UTV's manual for specific controls if using a power-angle kit, or manually adjust the blade angle using the provided pins on the push tube assembly.
2. ഉയർത്തലും താഴ്ത്തലും: Use your UTV's winch or manual lift system to raise and lower the plow blade. Ensure the blade is fully raised when transporting the UTV and fully lowered when plowing.
3. Plowing Technique: Drive at a controlled speed, especially in deep or heavy snow. Overlapping passes will ensure complete snow removal. Be mindful of obstacles and uneven terrain. The spring-loaded trip mechanism on the blade helps prevent damage if an obstacle is struck.

Operation Video Reference:

മെയിൻ്റനൻസ്

Regular maintenance will extend the life of your KFI Snow Plow Kit and ensure optimal performance.

• Inspect Wear Bar: Regularly check the 2-sided Grade 50 Steel Wear Bar for wear. Replace when necessary to maintain effective plowing and protect the main blade.
• ഫാസ്റ്റനറുകൾ പരിശോധിക്കുക: Before each use, inspect all bolts, nuts, and pins for tightness. Tighten any loose fasteners to prevent component failure.
• ലൂബ്രിക്കേഷൻ: Lubricate all pivot points and moving parts with a suitable grease to ensure smooth operation and prevent rust.
• വൃത്തിയാക്കലും സംഭരണവും: After each use, clean the plow blade and all components to remove snow, ice, and salt. Store the plow in a dry area when not in use to prevent corrosion.

ട്രബിൾഷൂട്ടിംഗ്

If you encounter issues with your snow plow, refer to the following common troubleshooting tips:

• Plow not lifting/lowering properly: Check winch cable for damage or entanglement. Ensure all connections to the plow are secure. Verify winch functionality.
• Plow not clearing snow effectively: Inspect the wear bar for excessive wear. Adjust the plow blade angle for optimal snow shedding. Ensure adequate downforce from the UTV.
• അമിതമായ വൈബ്രേഷൻ അല്ലെങ്കിൽ ശബ്ദം: Check all mounting hardware for tightness. Inspect for any bent or damaged components. Ensure the plow is properly aligned with the UTV.

For further assistance, please contact KFI Products customer support.

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റിയും പിന്തുണയും

KFI Products offers a satisfaction guarantee. For specific warranty details or technical support, please refer to the documentation included with your product or contact KFI Products directly. Customer support is available for assistance.

തിരികെ നൽകൽ നയം: 30-day easy returns are available through the seller, DnS Power Brands.