Parkside Polishing Set PWP 90 B2 Instruction Manual

ആമുഖം

This instruction manual provides essential information for the safe and effective use of your Parkside Polishing Set PWP 90 B2. Please read this manual thoroughly before first use and keep it for future reference. This set is designed for use with the Parkside PWP 90 B2 polisher (LIDL IAN 104097, 273271) for vehicle care, specifically for applying polishes and waxes.

ചിത്രം 1: കഴിഞ്ഞുview of the Parkside Polishing Set PWP 90 B2, showing the polishing plate, sponge cap, and synthetic fur cap.

പാക്കേജ് ഉള്ളടക്കം

The Parkside Polishing Set PWP 90 B2 includes the following components:

• 1x Polishing Plate: The base attachment for the polisher.
• 1x Sponge Cap: Designed for applying polishes.
• 1x Synthetic Fur Cap: Designed for waxing and buffing.

സജ്ജീകരണ നിർദ്ദേശങ്ങൾ

Follow these steps to correctly attach the polishing accessories to your Parkside PWP 90 B2 polisher:

1. Ensure Polisher is Off: Before attaching any accessories, ensure your Parkside PWP 90 B2 polisher is switched off and unplugged from the power source to prevent accidental startup.
2. Attach Polishing Plate: Securely fasten the polishing plate to the polisher's spindle. Refer to your polisher's manual for specific attachment instructions if needed.
3. Select and Attach Cap:
   • For polishing, use the സ്പോഞ്ച് തൊപ്പി. Carefully stretch the sponge cap over the polishing plate, ensuring it fits snugly and is centered.
   • For waxing or buffing, use the Synthetic Fur Cap. Stretch the synthetic fur cap over the polishing plate, ensuring a secure and even fit.
4. അറ്റാച്ചുമെന്റ് പരിശോധിക്കുക: Gently tug on the attached cap to ensure it is firmly secured to the polishing plate and will not detach during operation.

Image 2: The sponge cap, used for applying polishing compounds.

Image 3: The synthetic fur cap, ideal for waxing and buffing surfaces.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

This section outlines the general procedure for using the polishing set. Always refer to your polisher's specific operating instructions and the polish/wax product's guidelines.

General Polishing Procedure:

1. ഉപരിതലം തയ്യാറാക്കുക: Ensure the surface to be polished is clean, dry, and free of dirt or debris.
2. Apply Polish: Apply a small amount of polishing compound directly onto the sponge cap or the surface area to be polished. Do not over-apply.
3. Start Polisher: Place the polisher with the sponge cap flat on the surface before turning it on. Start at a low speed and gradually increase as needed.
4. Polish Area: Move the polisher in a consistent, overlapping pattern (e.g., cross-hatch) over the surface. Apply light, even pressure. Avoid pressing too hard, as this can generate excessive heat.
5. പുരോഗതി നിരീക്ഷിക്കുക: Continuously check the surface for desired results.
6. Turn Off Polisher: Before lifting the polisher from the surface, turn it off.
7. Wipe Residue: Use a clean microfiber cloth to wipe off any polish residue.

General Waxing/Buffing Procedure:

1. ഉപരിതലം തയ്യാറാക്കുക: Ensure the surface is clean and dry, ideally after polishing.
2. വാക്സ് പ്രയോഗിക്കുക: Apply a thin, even layer of wax to the synthetic fur cap or directly to the surface.
3. Start Polisher: Place the polisher with the synthetic fur cap flat on the surface before turning it on. Use a low to medium speed.
4. Wax/Buff Area: Move the polisher in a consistent, overlapping pattern. The synthetic fur cap is excellent for spreading wax evenly and buffing to a high shine.
5. Turn Off Polisher: Before lifting the polisher from the surface, turn it off.
6. Final Buff (Optional): For an even higher shine, a final hand buff with a clean, dry microfiber cloth may be performed.

പ്രധാനപ്പെട്ട സുരക്ഷാ കുറിപ്പ്:

• സുരക്ഷാ ഗ്ലാസുകൾ പോലുള്ള ഉചിതമായ വ്യക്തിഗത സംരക്ഷണ ഉപകരണങ്ങൾ (പിപിഇ) എപ്പോഴും ധരിക്കുക.
• Do not use the polisher near flammable liquids or gases.
• Avoid applying excessive pressure, which can damage the surface or the polisher.
• Regularly check the caps for wear and tear. Replace them if they become damaged or ineffective.

പരിപാലനവും പരിചരണവും

Proper maintenance extends the life of your polishing set and ensures optimal performance.

1. Cleaning Caps:
   • After each use, remove the sponge and synthetic fur caps from the polishing plate.
   • Wash the caps thoroughly with warm water and a mild detergent. Gently squeeze out excess product and dirt.
   • Rinse thoroughly until all soap residue is gone.
   • Allow the caps to air dry completely before storing or reusing. Do not tumble dry or expose to direct heat.
2. Cleaning Polishing Plate: Wipe the polishing plate with a damp cloth to remove any residue. Ensure it is dry before storage.
3. സംഭരണം: Store the polishing set components in a clean, dry place, away from direct sunlight and extreme temperatures.
4. പരിശോധന: Periodically inspect the caps for signs of wear, tears, or hardening. Replace them if they are no longer effective or show damage.

ട്രബിൾഷൂട്ടിംഗ്

This section addresses common issues you might encounter with your polishing set.

സ്പെസിഫിക്കേഷനുകൾ

Key technical details for the Parkside Polishing Set PWP 90 B2:

വാറൻ്റി വിവരങ്ങൾ

Specific warranty details for the Parkside Polishing Set PWP 90 B2 are not provided in this manual. For information regarding the product warranty, please refer to the documentation included with your purchase, the product packaging, or contact the manufacturer directly. Warranty terms may vary by region and retailer.

ഉപഭോക്തൃ പിന്തുണ

If you encounter any issues or have questions regarding your Parkside Polishing Set PWP 90 B2 that are not covered in this manual, please contact the retailer where you purchased the product or the manufacturer, Parkside, for assistance. Please have your product model number (PWP 90 B2) and ASIN (B07L4LNNXP) ready when contacting support.

You may also visit the official Parkside website for additional resources or contact information.