1. ഉൽപ്പന്നം കഴിഞ്ഞുview
The uxcell ON OFF Power Push Button Control Switch Box is a robust electrical component designed for direct control of three-phase motors without the need for an additional magnetic switch. It features a self-locking 'ON' button and a reset 'OFF' button, ensuring reliable and safe operation.
This switch is characterized by its accurate on-off loaded current capability and high mechanical intensity, making it a suitable choice for various industrial applications.
ചിത്രം 1: മുൻഭാഗം view of the uxcell Push Button Control Switch Box. This image displays the front of the uxcell push button switch, highlighting the black 'ON' button and the red 'OFF' button, which are the primary controls for the device.
- ഉൽപ്പന്നത്തിൻ്റെ പേര്: പുഷ് ബട്ടൺ സ്വിച്ച്
- വാല്യംtagഇ/നിലവിലെ: 380VAC 30A
- തരം: ON/OFF (ON: Self-Locking. OFF: the ON button will reset)
- അപേക്ഷ: Widely used in machine tools, textile machinery, and other industrial equipment.
2. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
Proper installation is crucial for the safe and effective operation of the switch. Ensure all power is disconnected before beginning installation.
- മൗണ്ടിംഗ്: Securely mount the switch box to a stable surface using appropriate fasteners. The mounting hole diameter is 4mm (0.16 inches).
- വയറിംഗ്: The switch features screw terminals for easy and secure wiring. Connect the three-phase motor wiring directly to the designated terminals within the switch box. Refer to the internal wiring diagram if available on the unit.
- എൻക്ലോഷർ സമഗ്രത: Ensure the enclosure is properly sealed after wiring to protect internal components from dust and moisture.
ചിത്രം 2: ആന്തരിക view of the switch box with wiring terminals. This image reveals the interior of the switch box, displaying the robust screw terminals designed for secure electrical wiring connections. The internal mechanism of the push buttons is also visible.
പ്രധാനപ്പെട്ടത്: Ensure all electrical connections comply with local electrical codes and safety standards. If you are unsure about the wiring process, consult a qualified electrician.
3. പ്രവർത്തന നിർദ്ദേശങ്ങൾ
The uxcell Push Button Control Switch is designed for straightforward operation:
- ഓണാക്കാൻ: Press the black 'ON' button. This button is self-locking, meaning it will remain depressed and the circuit will stay closed until the 'OFF' button is pressed.
- ഓഫാക്കാൻ: Press the red 'OFF' button. Pressing the 'OFF' button will release the 'ON' button from its self-locked state, opening the circuit and stopping the connected equipment.
4. പരിപാലനം
Regular maintenance helps ensure the longevity and reliable performance of your switch box:
- വൃത്തിയാക്കൽ: Periodically clean the exterior of the switch box with a dry, soft cloth. Avoid using abrasive cleaners or solvents.
- പരിശോധന: Routinely inspect the wiring connections to ensure they remain tight and free from corrosion. Check the integrity of the enclosure for any signs of damage or wear.
- പരിസ്ഥിതി വ്യവസ്ഥകൾ: Ensure the switch is operating within its specified environmental conditions to prevent premature failure.
Always disconnect power to the switch and connected equipment before performing any maintenance or inspection.
5. പ്രശ്നപരിഹാരം
If you encounter issues with your uxcell Push Button Control Switch, consider the following:
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| Switch does not turn ON or stay ON | Loose wiring connection; Internal mechanism fault; Overload protection tripped (if applicable to connected system) | Check and tighten all screw terminals. If issue persists, the switch may require replacement. Verify the connected system is not overloaded. |
| No power transfer to connected equipment | Incorrect wiring; Faulty switch; Power supply issue | Verify wiring against the diagram. Test the power supply to the switch. If the switch is confirmed faulty, replace it. |
| Difficulty fitting conduit adapters | Conduit holes are too small for standard fittings | Carefully ream or hone the conduit entry holes to the required size, ensuring no damage to the enclosure. |
ട്രബിൾഷൂട്ടിംഗ് ഘട്ടങ്ങൾ പ്രശ്നം പരിഹരിക്കുന്നില്ലെങ്കിൽ, ഉപഭോക്തൃ പിന്തുണയെയോ യോഗ്യതയുള്ള ഒരു ടെക്നീഷ്യനെയോ ബന്ധപ്പെടുക.
6 സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| ഉൽപ്പന്നത്തിൻ്റെ പേര് | പുഷ് ബട്ടൺ സ്വിച്ച് |
| മോഡൽ | TBSN-330 (a18112500ux0003) |
| ടൈപ്പ് ചെയ്യുക | ഓൺ/ഓഫ് |
| വാല്യംtagഇ / കറന്റ് | 380VAC 30A |
| ഓപ്പറേറ്റിംഗ് വോളിയംtage | 380 വോൾട്ട് |
| നിലവിലെ റേറ്റിംഗ് | 30 Amps |
| ഓപ്പറേഷൻ മോഡ് | ഓൺ-ഓഫ് |
| ബന്ധപ്പെടാനുള്ള തരം | സാധാരണയായി തുറന്നിരിക്കുന്നു |
| കണക്റ്റർ തരം | സ്ക്രൂ |
| അതിതീവ്രമായ | ദ്വാരത്തിലൂടെ |
| മൗണ്ടിംഗ് ഹോൾ വ്യാസം | 4 മിമി / 0.16" |
| Total Size (Approx.) | 105 x 63 x 54mm / 4.13" x 2.48" x 2.12" (L*W*H) |
| ഉൽപ്പന്ന അളവുകൾ | 4.72 x 2.76 x 2.36 ഇഞ്ച്; 8.11 ഔൺസ് |
| നിർമ്മാതാവ് | uxcell |
| ആദ്യ തീയതി ലഭ്യമാണ് | 2 ജനുവരി 2019 |
Figure 3: Dimensions of the uxcell Push Button Control Switch Box. This image provides a side view of the switch box, illustrating its physical dimensions: approximately 105mm (4.13 inches) in length, 63mm (2.48 inches) in width, and 54mm (2.12 inches) in height.
7. വാറൻ്റി വിവരങ്ങൾ
Specific warranty details for this product are typically provided at the point of purchase or by the manufacturer. For information regarding warranty coverage, terms, and conditions, please refer to your purchase documentation or contact uxcell directly.
8. ഉപഭോക്തൃ പിന്തുണ
For further assistance, technical support, or inquiries regarding the uxcell ON OFF Power Push Button Control Switch Box, please contact uxcell customer service or visit their official store page:
