PetSafe Wire Break Locator - User Manual

ആമുഖം

The PetSafe Wire Break Locator is designed to help you easily find complete breaks in the boundary wire of any in-ground pet fence system. This device utilizes advanced technology with dual tone and light indicators to pinpoint the exact location of a wire break, allowing for quick and efficient repairs. It is important to note that this locator is specifically designed for complete wire breaks and may not detect partial breaks.

ഘടകങ്ങൾ ഉൾപ്പെടുത്തിയിട്ടുണ്ട്

Your PetSafe Wire Break Locator kit includes the following items:

• Locator Transmitter and Adaptor
• Expandable Locator (Wand)
• 50 ft. of Boundary Wire
• 2 Grounding Stakes
• 2 Gel-filled Capsules
• 2 വയർ പരിപ്പ്
• ഉൽപ്പന്ന മാനുവൽ

ചിത്രം 1: ഓവർview of all components included in the PetSafe Wire Break Locator kit. This includes the locator wand, transmitter, power adapter, grounding stakes, boundary wire, wire nuts, and gel-filled capsules.

സജ്ജീകരണ നിർദ്ദേശങ്ങൾ

1. ട്രാൻസ്മിറ്റർ തയ്യാറാക്കുക:

   Connect the locator transmitter to a power outlet using the provided adaptor. Ensure the transmitter is placed near the boundary wire connection point of your in-ground fence system.

   

   Figure 2: The PetSafe Wire Break Locator Transmitter, which sends the signal through the boundary wire.

2. Install Grounding Stakes:

   Insert both grounding stakes into the ground approximately 10 feet apart. For optimal performance, especially in dry conditions, pour several gallons of water around each grounding stake to ensure good conductivity. Both stakes must be used to hear the two tones separately.

   

   Figure 3: The two grounding stakes, essential for the proper functioning of the locator system.

3. Connect to Boundary Wire:

   Connect the transmitter to your existing in-ground fence boundary wire according to the instructions in your fence system's manual. The transmitter sends two unique tones down each side of your boundary wire.

4. Prepare the Locator Wand:

   Insert 2 AAA batteries (not included) into the expandable locator wand. Extend the wand to a comfortable length for use.

   

   Figure 4: The expandable locator wand, used to detect the signal along the wire.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Follow these steps to locate a wire break in your in-ground fence system:

1. സിസ്റ്റം സജീവമാക്കുക:

   Ensure the transmitter is powered on and connected to your boundary wire. Turn on the locator wand using its power button.

2. വോളിയം ക്രമീകരിക്കുക:

   Use the adjustable volume dial on the locator wand to set a comfortable listening level for the tones.

3. Trace the Wire:

   Walk along your boundary wire path, holding the locator wand near the ground. The locator will provide both audible tones and visual light indicators:

   • A പച്ച വെളിച്ചം indicates a continuous tone, signifying an intact wire segment.
   • A ചുവന്ന വെളിച്ചം indicates an intermittent tone, signifying a break in the wire.

4. Locate the Break:

   As you approach a wire break, the tone and light indicators will change. The point where the continuous tone (green light) switches to an intermittent tone (red light) is the location of the wire break. Common areas for breaks include where the wire exits the house, crosses sidewalks or driveways, or is near landscaping.

Repairing Wire Breaks

Once a wire break is located, use the included repair components to fix it:

1. Expose the Break:

   Carefully dig up the wire at the identified break point.

2. വയറുകൾ തയ്യാറാക്കുക:

   Trim any damaged sections of the wire. If necessary, use the included 50 ft. of boundary wire to bridge larger gaps.

   

   Figure 5: The included 50 ft. of yellow boundary wire for making repairs or extending the fence.

3. വയറുകൾ ബന്ധിപ്പിക്കുക:

   Use the included wire nuts to securely connect the broken wire ends. Ensure a tight connection to prevent future issues.

4. Seal Connection:

   Place the wire nut connection inside one of the gel-filled capsules. The gel will provide a waterproof seal, protecting the connection from moisture and corrosion. Close the capsule securely.

   

   Figure 6: Wire nuts and gel-filled capsules used for creating waterproof and secure wire connections.

5. Test and Bury:

   After repairing, re-test the boundary wire with the locator to confirm the break is fixed. Once confirmed, bury the repaired section of the wire.

മെയിൻ്റനൻസ്

• ബാറ്ററി മാറ്റിസ്ഥാപിക്കൽ: Replace the 2 AAA batteries in the locator wand when the audio signal becomes weak or the lights dim.
• വൃത്തിയാക്കൽ: Wipe the locator and transmitter with a damp cloth as needed. Do not submerge any components in water.
• സംഭരണം: ഉപയോഗത്തിലില്ലാത്തപ്പോൾ യൂണിറ്റ് വരണ്ടതും തണുത്തതുമായ സ്ഥലത്ത് സൂക്ഷിക്കുക.

ട്രബിൾഷൂട്ടിംഗ്

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റി വിവരങ്ങൾ

The PetSafe Wire Break Locator comes with a 1 വർഷത്തെ പരിമിത വാറൻ്റി from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For full warranty terms and conditions, please refer to the official PetSafe webസൈറ്റ് അല്ലെങ്കിൽ ഉപഭോക്തൃ പിന്തുണയുമായി ബന്ധപ്പെടുക.

ഉപഭോക്തൃ പിന്തുണ

For any questions, assistance, or troubleshooting not covered in this manual, our U.S.-based customer care experts are available to help. You can reach them by phone, email, or chat. Please visit the official PetSafe website for contact details and support hours.

Webസൈറ്റ്: www.petsafe.com