1. ആമുഖം
Thank you for choosing the EBIKELING 36V 700C Front 500 Watt Electric Bike Conversion Kit. This kit is designed to transform your standard bicycle into an electric bike, providing powerful and efficient assistance for your rides. This manual provides essential information for the safe and correct installation, operation, and maintenance of your conversion kit.
ഉൾപ്പെടുത്തിയ ഘടകങ്ങൾ:
- Front Wheel Hub Motor (700C, 36V 500W)
- കൺട്രോളർ
- പ്രദർശിപ്പിക്കുക
- ത്രോട്ടിൽ
- ബ്രേക്ക് ലിവറുകൾ (മോട്ടോർ കട്ട്-ഓഫ് സെൻസറുകൾ ഉള്ളത്)
- Pedal-Assist System (PAS)
- ടോർക്ക് ആർം
- കേബിൾ ബന്ധങ്ങൾ
- ഇൻസ്ട്രക്ഷൻ മാനുവൽ
കുറിപ്പ്: Battery and tire are NOT included in this kit and must be purchased separately.
2 സുരക്ഷാ വിവരങ്ങൾ
Read all instructions carefully before installation and use. Failure to follow safety guidelines may result in serious injury or damage to the product.
- Always wear a helmet and appropriate safety gear when riding an electric bicycle.
- പ്രത്യേകിച്ച് നനഞ്ഞ സാഹചര്യങ്ങളിൽ, സവാരി ചെയ്യുന്നതിന് മുമ്പ് എല്ലാ കണക്ഷനുകളും സുരക്ഷിതവും വാട്ടർപ്രൂഫുമാണെന്ന് ഉറപ്പാക്കുക.
- Regularly inspect your bicycle and conversion kit components for wear, damage, or loose connections.
- Do not attempt to modify the motor or controller. Unauthorized modifications can void the warranty and create safety hazards.
- Be aware of local regulations regarding electric bicycles, including speed limits and power restrictions.
- The kit is designed for a 700C front wheel. Ensure your bicycle is compatible.
3. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
This section outlines the general steps for installing your ebike conversion kit. While the kit is designed for straightforward installation, professional assistance is recommended if you are unsure about any steps.
3.1 Prepare Your Bicycle
- Ensure your bicycle is clean and stable, preferably mounted on a repair stand.
- Remove the existing front wheel from your bicycle.
- Inspect the front fork dropouts to ensure they are compatible with the hub motor axle (10 mm diameter). Steel forks may require filing if the axle does not fit, but exercise caution to avoid damage. Aluminum forks can also be filed with extra caution.
3.2 Install the Front Wheel Hub Motor
- Carefully insert the hub motor wheel into the front fork dropouts.
- Ensure the motor cable exits on the correct side and is not pinched.
- Secure the wheel using the provided nuts and washers. Tighten them firmly to prevent the wheel from shifting during operation.
- Install the torque arm on the axle to prevent it from spinning out of the dropouts under motor power.
3.3 Install the Controller and Wiring
- Mount the controller in a secure and protected location on your bike frame, typically near the battery.
- Connect the motor cable to the controller. The waterproof connectors are designed for easy and secure attachment.
- Route all cables neatly along the frame using the provided cable ties. Ensure cables do not interfere with moving parts (wheels, pedals, steering) or get pinched.
3.4 Install Display, Throttle, and Brake Levers
- Attach the display to your handlebar in a position that is easily visible and accessible.
- Install the throttle on the handlebar.
- Replace your existing brake levers with the provided brake levers, which include motor cut-off sensors. These sensors ensure the motor disengages when brakes are applied, enhancing safety. If you prefer to use your own brakes, the kit will still operate without the provided brake levers.
- Install the Pedal-Assist System (PAS) sensor near the bottom bracket. Ensure the magnet ring is correctly aligned with the sensor for proper function.
3.5 ബാറ്ററി ബന്ധിപ്പിക്കുക
- Connect your 36V battery (not included) to the controller. The controller comes with an SY60 male-type battery connector (compatible with XT60 connectors).
- Ensure the battery is securely mounted on the bike frame.
4. പ്രവർത്തന നിർദ്ദേശങ്ങൾ
4.1 പവർ ഓൺ/ഓഫ്
- To power on the system, press and hold the power button on the display.
- പവർ ഓഫ് ചെയ്യാൻ, ഡിസ്പ്ലേ ഓഫാകുന്നതുവരെ പവർ ബട്ടൺ വീണ്ടും അമർത്തിപ്പിടിക്കുക.
4.2 ഡിസ്പ്ലേ ഉപയോഗിക്കുന്നു
The display provides real-time information about your ride and allows you to adjust settings. Common information includes speed, battery level, pedal-assist level, and trip distance.
4.3 Pedal-Assist System (PAS)
- The PAS provides motor assistance as you pedal. Use the buttons on the display to select your desired assist level (e.g., 1-5). Higher levels provide more assistance.
4.4 Throttle Operation
- The throttle allows you to engage the motor without pedaling. Twist or press the throttle to activate motor power.
4.5 Brake Lever Function
- If you installed the provided brake levers, they include motor cut-off sensors. Applying the brakes will instantly cut power to the motor, ensuring safe stopping.
5. പരിപാലനം
Regular maintenance ensures the longevity and optimal performance of your ebike conversion kit.
5.1 പൊതു പരിചരണം
- Keep the motor, controller, and electrical connections clean and free from dirt and debris.
- The kit features waterproof components, allowing for confident riding in various weather conditions. However, avoid submerging the motor or controller in water.
- എല്ലാ ബോൾട്ടുകളുടെയും ഫാസ്റ്റനറുകളുടെയും ഇറുകിയത പതിവായി പരിശോധിക്കുക.
5.2 Motor Care
- The hub motor is largely maintenance-free. Avoid disassembling the motor as it may void the warranty.
- Ensure the motor cable is not damaged or frayed.
5.3 Battery Care (Battery Not Included)
- Refer to your battery manufacturer's instructions for specific charging and maintenance guidelines.
- Always use the charger recommended by your battery manufacturer.
- ഉപയോഗത്തിലില്ലാത്തപ്പോൾ തണുത്തതും ഉണങ്ങിയതുമായ സ്ഥലത്ത് ബാറ്ററി സൂക്ഷിക്കുക.
6. പ്രശ്നപരിഹാരം
If you encounter issues with your ebike kit, consult the following common troubleshooting tips:
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| Motor not engaging/no power | Loose battery connection, low battery, display off, brake levers engaged. | Check battery connection and charge level. Ensure display is on. Release brake levers. Check all cable connections. |
| ഡിസ്പ്ലേ പിശക് കോഡ് കാണിക്കുന്നു | പ്രത്യേക ഘടക തകരാറ് അല്ലെങ്കിൽ കണക്ഷൻ പ്രശ്നം. | Refer to the display's specific error code manual (if provided) or contact customer support with the error code. Check all connections related to the indicated component. |
| PAS not working | PAS sensor misalignment, damaged sensor/magnets. | Check alignment of PAS sensor and magnet ring. Ensure sensor cable is securely connected. |
| Throttle not working | Loose throttle connection, damaged throttle. | Check throttle cable connection. Ensure throttle is not stuck. |
7 സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| ബ്രാൻഡ് | EBIKELING |
| മോഡൽ നമ്പർ | EBLG1810 |
| മോട്ടോർ തരം | ഫ്രണ്ട് ഹബ് മോട്ടോർ |
| പവർ ഔട്ട്പുട്ട് | 500 വാട്ട് |
| വാല്യംtage | 36V |
| ചക്രത്തിൻ്റെ വലിപ്പം | 700C (also compatible with 29 Inches) |
| മെറ്റീരിയൽ | അലോയ് സ്റ്റീൽ, അലുമിനിയം |
| നിറം | കറുപ്പ് |
| ഇനത്തിൻ്റെ ഭാരം | 16.1 പൗണ്ട് |
| വാട്ടർപ്രൂഫ് ഘടകങ്ങൾ | അതെ |
8. വാറൻ്റിയും പിന്തുണയും
EBIKELING stands behind the quality of its products. Your conversion kit comes with the following warranty:
- Hub Ebike Motor and Battery: 1 വർഷത്തെ വാറൻ്റി.
- All Other Components: എൺപത് മാസത്തെ വാറണ്ടിയും.
For technical assistance, troubleshooting, or warranty claims, please contact EBIKELING customer support. Our team is based in Chicago and ready to assist you.
സന്ദർശിക്കുക EBIKELING Store കൂടുതൽ വിവരങ്ങൾക്കും ബന്ധപ്പെടാനുള്ള വിവരങ്ങൾക്കും.
9. EBIKELING Experience Overview
ഒരു പൊതു ഓവറിനായി ഈ വീഡിയോ കാണുകview of the ebike experience with EBIKELING conversion kits. This video showcases various riding scenarios and the benefits of converting your bike to electric.
