ആമുഖം
The Sharp Atomic Clock provides precise timekeeping and temperature monitoring for your home or office. Featuring a large, easy-to-read display, this clock automatically synchronizes with the atomic time signal (WWVB) broadcast from Fort Collins, Colorado, ensuring accuracy without manual adjustments. It also includes a wireless outdoor sensor to display both indoor and outdoor temperatures.
ഉൽപ്പന്ന സവിശേഷതകൾ
- ആറ്റോമിക് സമയ കൃത്യത: Automatically synchronizes with the WWVB atomic time signal for precise timekeeping.
- Jumbo 3" Easy-to-Read Numbers: Large digital display for clear visibility of time, date, and temperature.
- Indoor/Outdoor Temperature Display: Monitors both indoor ambient temperature and outdoor temperature via a wireless sensor.
- വയർലെസ് Outട്ട്ഡോർ സെൻസർ: Transmits outdoor temperature data to the main unit.
- ബാറ്ററി പവർ: Operates on batteries for flexible placement (batteries not included).
- Automatic Daylight Saving Time (DST) Adjustment: Automatically adjusts for daylight saving time changes.
- തിരഞ്ഞെടുക്കാവുന്ന സമയ മേഖലകൾ: Allows selection of various US time zones.
- 12/24 മണിക്കൂർ ഫോർമാറ്റ്: Option to display time in either 12-hour or 24-hour format.
- Celsius/Fahrenheit Display: Switch between Celsius and Fahrenheit temperature units.
പാക്കേജ് ഉള്ളടക്കം
സജ്ജീകരണവുമായി മുന്നോട്ടുപോകുന്നതിനുമുമ്പ് എല്ലാ ഇനങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക.
- Sharp Atomic Clock Main Unit
- വയർലെസ് Outട്ട്ഡോർ സെൻസർ
- ഇൻസ്ട്രക്ഷൻ മാനുവൽ
Note: Batteries are not included. The main unit requires 2 AA batteries, and the outdoor sensor requires 2 AA batteries.
സജ്ജമാക്കുക
1. ബാറ്ററി ഇൻസ്റ്റാളേഷൻ
- പ്രധാന ക്ലോക്ക് യൂണിറ്റിന്റെ പിൻഭാഗത്തുള്ള ബാറ്ററി കമ്പാർട്ട്മെന്റ് തുറക്കുക.
- ശരിയായ പോളാരിറ്റി (+ ഉം - ഉം) നിരീക്ഷിച്ചുകൊണ്ട് 2 AA ബാറ്ററികൾ ഇടുക.
- ബാറ്ററി കമ്പാർട്ട്മെൻ്റ് കവർ അടയ്ക്കുക.
- Open the battery compartment on the wireless outdoor sensor.
- Insert 2 AA batteries into the outdoor sensor, observing the correct polarity.
- Close the outdoor sensor's battery compartment cover.
2. പ്രാരംഭ സമന്വയവും ക്രമീകരണങ്ങളും
After battery installation, the clock will attempt to receive the WWVB atomic time signal and connect to the outdoor sensor. This process may take several minutes or up to 24 hours depending on your location and environmental interference.
- സമയ മേഖല: Press the "TIME ZONE" button (often labeled "UP TIME ZONE") on the back of the clock to cycle through available time zones (PST, MST, CST, EST). Select your desired time zone.
- 12/24 മണിക്കൂർ ഫോർമാറ്റ്: Press the "12/24" button to switch between 12-hour and 24-hour display.
- സെൽഷ്യസ്/ഫാരൻഹീറ്റ്: Press the "°C/°F" button to toggle between Celsius and Fahrenheit temperature display.
- Outdoor Sensor Pairing: If the outdoor temperature does not appear, press the "CHANNEL" button on the main unit to search for the sensor signal. Ensure the outdoor sensor is within range and not obstructed.
For optimal signal reception, place the clock away from large metal objects, electronic devices, and areas with heavy concrete or brick walls. The outdoor sensor should be placed in a shaded, dry location, protected from direct sunlight and precipitation, for accurate readings.

Image: The Sharp Atomic Clock main unit displaying time, indoor temperature, date, and outdoor temperature, alongside its wireless outdoor sensor.
ഓപ്പറേഷൻ
വിവരങ്ങൾ പ്രദർശിപ്പിക്കുക
The clock's large LCD screen displays the following information:
- സമയം: Current time in selected 12-hour or 24-hour format.
- PM സൂചകം: Displays "PM" for afternoon hours in 12-hour format.
- Atomic Signal Indicator: Shows the status of the WWVB atomic time signal reception.
- ഇൻഡോർ താപനില: Current temperature measured by the main unit.
- Month/Date/Day: Current calendar information.
- ഔട്ട്ഡോർ താപനില: Current temperature measured by the wireless outdoor sensor.
- Outdoor Sensor Channel: Indicates the channel the outdoor sensor is transmitting on.
- ബാറ്ററി കുറഞ്ഞ സൂചകം: An icon will appear when batteries are low and need replacement.
Button Functions (Rear Panel)
| ബട്ടൺ | ഫംഗ്ഷൻ |
|---|---|
| കലണ്ടർ | Press and hold for 2 seconds to manually set calendar (Year, Month, Date, Language). Use UP/DOWN buttons to change values. |
| സമയം | Press and hold for 2 seconds to manually set time (DST ON/OFF, Hour, Minute). Use UP/DOWN buttons to change values. |
| 12/24 | Switches between 12-hour and 24-hour time display. |
| ചാനൽ | Press to switch between outdoor sensor channels (1, 2, 3). Press and hold for 2 seconds to pair with the outdoor sensor. |
| ° C/° F | സെൽഷ്യസിനും ഫാരൻഹീറ്റിനും ഇടയിൽ താപനില ഡിസ്പ്ലേ ടോഗിൾ ചെയ്യുന്നു. |
| വേവ് | Initiates a manual search for the WWVB atomic time signal. |
| പുനഃസജ്ജമാക്കുക | Resets the clock to factory default settings. Requires a pointed object (e.g., paperclip). |
| UP / TIME ZONE | Increases values during manual setting. Press to cycle through time zones. |
| താഴേക്ക് | Decreases values during manual setting. |
മെയിൻ്റനൻസ്
- ബാറ്ററി മാറ്റിസ്ഥാപിക്കൽ: Replace batteries in both the main unit and outdoor sensor when the low battery indicator appears on the display. Always replace all batteries at the same time with new ones.
- വൃത്തിയാക്കൽ: Clean the clock and sensor with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Sട്ട്ഡോർ സെൻസർ പ്ലേസ്മെന്റ്: Periodically check the outdoor sensor's location to ensure it remains protected from extreme weather conditions, direct sunlight, and moisture.
ട്രബിൾഷൂട്ടിംഗ്
- Clock not syncing with atomic time:
- Ensure the clock is placed away from electronic interference (TVs, computers, microwaves).
- Try placing the clock near a window facing Fort Collins, Colorado (if applicable to your region).
- Press the "WAVE" button to initiate a manual signal search.
- Allow up to 24 hours for initial synchronization.
- Outdoor temperature not displaying or incorrect:
- Check batteries in the outdoor sensor.
- Ensure the outdoor sensor is within the effective transmission range (typically up to 100 feet, line of sight).
- Press the "CHANNEL" button on the main unit to re-establish connection.
- Verify the outdoor sensor is placed in a location protected from direct sunlight and rain, which can affect readings.
- ഡിസ്പ്ലേ മങ്ങിയതോ ശൂന്യമോ ആണ്:
- Replace all batteries in the main unit with fresh ones.
- ശരിയായ പോളാരിറ്റിയോടെ ബാറ്ററികൾ ചേർത്തിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക.
- തെറ്റായ സമയമോ തീയതിയോ:
- ശരിയായ സമയ മേഖല തിരഞ്ഞെടുത്തിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക.
- Check if Daylight Saving Time (DST) setting is correct for your region.
- If atomic signal is not received, manually set the time and date using the "TIME" and "CALENDAR" buttons.
സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| ബ്രാൻഡ് | മൂർച്ചയുള്ള |
| മോഡൽ നമ്പർ | 8541848315 |
| യു.പി.സി | 049353998732 |
| നിറം | ഗ്ലോസ് ബ്ലാക്ക് |
| ഡിസ്പ്ലേ തരം | ഡിജിറ്റൽ എൽസിഡി |
| പ്രത്യേക ഫീച്ചർ | Atomic Time Synchronization (WWVB), Indoor/Outdoor Temperature |
| ഉൽപ്പന്ന അളവുകൾ | 13"W x 1.5"H (Main Unit) |
| പവർ ഉറവിടം | ബാറ്ററി പവർ |
| ആവശ്യമായ ബാറ്ററികളുടെ എണ്ണം | Main Unit: 2 AA; Outdoor Sensor: 2 AA |
| മെറ്റീരിയൽ | പ്ലാസ്റ്റിക് |
| മൗണ്ടിംഗ് തരം | Wall Mount / Tabletop Stand |
| ഇൻഡോർ/ഔട്ട്ഡോർ ഉപയോഗം | Indoor (Main Unit), Outdoor (Sensor) |
വാറൻ്റിയും പിന്തുണയും
Sharp products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the contact information provided with your product packaging or visit the official Sharp webവാറന്റി ക്ലെയിമുകൾക്കുള്ള വാങ്ങലിന്റെ തെളിവായി നിങ്ങളുടെ വാങ്ങൽ രസീത് സൂക്ഷിക്കുക.





