1. ആമുഖം
വാങ്ങിയതിന് നന്ദി.asing the American DJ HYDRO BEAM X1. This professional IP65-rated moving head beam fixture is designed for outdoor use, featuring a powerful 100W Osram Sirius HRI discharge lamp that produces a razor-sharp 3-degree beam. This manual provides essential information for the safe installation, operation, and maintenance of your unit. Please read these instructions thoroughly before operating the fixture to ensure proper use and to prolong its lifespan.
2 സുരക്ഷാ വിവരങ്ങൾ
തീപിടുത്തം, വൈദ്യുതാഘാതം അല്ലെങ്കിൽ വ്യക്തിപരമായ പരിക്കുകൾ എന്നിവ കുറയ്ക്കുന്നതിന് ഇനിപ്പറയുന്ന സുരക്ഷാ മുൻകരുതലുകൾ എപ്പോഴും പാലിക്കുക:
- ഇലക്ട്രിക്കൽ സുരക്ഷ: വൈദ്യുതി വിതരണം വോളിയം ഉറപ്പാക്കുകtage matches the fixture's requirements. Always disconnect from power before servicing or cleaning.
- ഗ്രൗണ്ടിംഗ്: This fixture must be properly grounded to prevent electric shock.
- ഔട്ട്ഡോർ ഉപയോഗം: The HYDRO BEAM X1 is IP65 rated for outdoor use. Ensure all connections are securely sealed with their rubber protective covers when used outdoors.
- മൗണ്ടിംഗ്: Always mount the fixture securely using appropriate clamps and safety cables. Ensure the mounting surface can support the fixture's weight.
- ചൂട്: Allow adequate ventilation around the fixture. Do not operate in enclosed spaces. Maintain a minimum distance of 0.5 meters from flammable materials.
- നേത്ര സുരക്ഷ: Avoid direct eye exposure to the light source. Never look directly into the beam.
- സേവനം: എല്ലാ സേവനങ്ങളും യോഗ്യതയുള്ള സേവന ഉദ്യോഗസ്ഥരെ ഏൽപ്പിക്കുക. യൂണിറ്റ് സ്വയം നന്നാക്കാൻ ശ്രമിക്കരുത്.
3. പാക്കേജ് ഉള്ളടക്കം
നിങ്ങളുടെ പാക്കേജിൽ ഇനിപ്പറയുന്ന ഇനങ്ങൾ അടങ്ങിയിട്ടുണ്ടെന്ന് പരിശോധിക്കുക:
- 1 x American DJ HYDRO BEAM X1 Moving Head Beam Light
- 1 x Power Cable (IP65 rated)
- 1 x ഉപയോക്തൃ മാനുവൽ (ഈ പ്രമാണം)
- 2 x Omega Brackets with Quick-Lock Fasteners
4. ഉൽപ്പന്നം കഴിഞ്ഞുview
The HYDRO BEAM X1 is a robust and versatile moving head fixture. Key features include a 100W LED light source, precise pan and tilt movement, a 3-degree beam angle, and an IP65 rating for environmental protection. It supports DMX512 control and offers wireless DMX capabilities.
ചിത്രം 4.1: മുൻഭാഗം view of the HYDRO BEAM X1, showing the light output lens and control panel.
The rear panel features all necessary connections, including 5-pin DMX In/Out, locking power In/Out, and a USB port for software updates. All connections are IP65 rated with rubber protective covers to ensure water and dust resistance.
ചിത്രം 4.2: പിൻഭാഗം view of the HYDRO BEAM X1, highlighting the DMX, power, and USB connections.
The fixture also includes a 16-facet circular prism with overlay and an independent frost filter for wash effects, allowing for diverse visual outputs.
Figure 4.3: Visual representation of the 16-facet circular prism effect (left) and the frost filter for wash effects (right).
5. സജ്ജീകരണം
5.1 മൗണ്ടിംഗ്
The HYDRO BEAM X1 can be mounted in various positions (truss, floor, wall) using the included Omega brackets. Always ensure the fixture is securely fastened and use a safety cable as a secondary attachment.
- Attach the Omega brackets to the bottom of the fixture using the quick-lock fasteners.
- Secure the brackets to a truss or other suitable mounting structure using appropriate clamps (ഉൾപ്പെടുത്തിയിട്ടില്ല).
- Always attach a safety cable from the fixture to the mounting structure.
5.2 പവർ കണക്ഷൻ
Connect the supplied IP65-rated power cable to the locking power input on the rear of the fixture. Ensure the power source matches the voltage requirements specified on the fixture.
5.3 DMX കണക്ഷൻ (ഓപ്ഷണൽ)
For DMX control, connect a 5-pin DMX cable from your DMX controller to the DMX IN port of the first fixture. For multiple fixtures, daisy-chain DMX cables from the DMX OUT of one fixture to the DMX IN of the next. Ensure all DMX connections are sealed with their rubber covers.
5.4 വയർലെസ് ഡിഎംഎക്സ് സജ്ജീകരണം
The HYDRO BEAM X1 features built-in wireless DMX. Refer to the fixture's internal menu for wireless DMX pairing instructions. Typically, this involves setting a common wireless DMX address or group for all fixtures and the transmitter.
6. പ്രവർത്തന നിർദ്ദേശങ്ങൾ
The HYDRO BEAM X1 is controlled via a digital display and four buttons: MENU, UP, DOWN, and ENTER. These buttons allow navigation through the menu options and adjustment of settings.
6.1 നിയന്ത്രണ പാനൽ
- മെനു: Accesses the main menu or returns to the previous menu level.
- UP / DOWN: മെനു ഓപ്ഷനുകളിലൂടെ നാവിഗേറ്റ് ചെയ്യുകയോ പാരാമീറ്റർ മൂല്യങ്ങൾ ക്രമീകരിക്കുകയോ ചെയ്യുന്നു.
- നൽകുക: Confirms a selection or saves a setting.
6.2 DMX വിലാസം
To control the fixture via DMX, you must set a unique DMX start address for each unit. Use the control panel to navigate to the DMX Address setting and adjust the value. Consult your DMX controller's manual for channel assignments and programming.
6.3 DMX ചാനൽ മോഡുകൾ
The HYDRO BEAM X1 offers multiple DMX channel modes (e.g., 14-channel, 16-channel). Select the desired mode via the control panel to match your DMX controller's setup. Each mode provides different levels of control over the fixture's features (Pan, Tilt, Dimmer, Strobe, Color, Gobo, Prism, Frost, Focus, etc.).
6.4 ഒറ്റപ്പെട്ട പ്രവർത്തനം
The fixture can operate without a DMX controller using its built-in programs:
- Auto Program Mode: Select from various pre-programmed light shows. Adjust speed and other parameters via the menu.
- സൗണ്ട് ആക്റ്റീവ് മോഡ്: The fixture will react to sound via its internal microphone. Adjust sensitivity as needed.
7. പരിപാലനം
Regular maintenance ensures optimal performance and extends the life of your HYDRO BEAM X1.
- വൃത്തിയാക്കൽ: ഇടയ്ക്കിടെ പുറംഭാഗം വൃത്തിയാക്കുക casing, lenses, and cooling fins with a soft, lint-free cloth. For stubborn dirt, use a mild glass cleaner. Ensure the fixture is powered off and cool before cleaning.
- ഫേംവെയർ അപ്ഡേറ്റുകൾ: Check the American DJ website for available firmware updates. Updates can be installed via the USB port on the rear of the fixture. Follow the instructions provided with the firmware update package.
- പരിശോധന: Regularly inspect power cables, DMX cables, and mounting hardware for any signs of wear or damage. Replace damaged components immediately.
- സംഭരണം: When not in use, store the fixture in a dry, dust-free environment, preferably in its original packaging or a suitable flight case.
8. പ്രശ്നപരിഹാരം
If you encounter issues with your HYDRO BEAM X1, refer to the following common problems and solutions:
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| ഫിക്സ്ചർ പവർ ഓൺ ആകുന്നില്ല | No power supply; Faulty cable; Internal fuse blown | Check power connection; Test cable; Contact service for fuse replacement. |
| DMX നിയന്ത്രണമില്ല | Incorrect DMX address; Faulty DMX cable; Incorrect DMX mode; DMX terminator missing | Verify DMX address; Check/replace DMX cables; Ensure DMX mode matches controller; Use a DMX terminator on the last fixture. |
| Fixture not responding to wireless DMX | Not paired; Interference; Transmitter issue | Re-pair the fixture with the wireless DMX transmitter; Check for sources of interference; Verify transmitter operation. |
| Movement is erratic or restricted | Mechanical obstruction; Calibration issue; DMX signal problem | Check for obstructions; Perform a fixture calibration via the menu; Verify DMX signal integrity. |
| Light output is dim or inconsistent | Dirty lens; LED degradation; Internal fault | Clean the lens; Contact service if LED performance is degraded. |
9 സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | സ്പെസിഫിക്കേഷൻ |
|---|---|
| മോഡൽ നമ്പർ | HYD100 |
| പ്രകാശ സ്രോതസ്സ് | 100W Osram Sirius HRI Discharge Lamp |
| ബീം ആംഗിൾ | 3-ഡിഗ്രി |
| DMX ചാനലുകൾ | Multiple DMX channel modes available |
| നിയന്ത്രണം | DMX512, Wireless DMX, Standalone (Auto, Sound Active) |
| കണക്ഷനുകൾ | 5-pin DMX In/Out, Locking Power In/Out, USB Port |
| IP റേറ്റിംഗ് | IP65 (പൊടി, ജല പ്രതിരോധം) |
| ഉൽപ്പന്ന അളവുകൾ | 17 x 14.5 x 21 ഇഞ്ച് (43.18 x 36.83 x 53.34 സെ.മീ) |
| ഇനത്തിൻ്റെ ഭാരം | 2 പൗണ്ട് (0.91 കി.ഗ്രാം) |
| നിർമ്മാതാവ് | അമേരിക്കൻ ഡിജെ |
| ആദ്യ തീയതി ലഭ്യമാണ് | 9 ജനുവരി 2019 |
10. വാറൻ്റിയും പിന്തുണയും
American DJ products are backed by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official American DJ website. For technical support, service, or parts, please contact American DJ customer service. They offer exceptional customer support and have over 35 years of experience in the industry.
ബന്ധപ്പെടാനുള്ള വിവരങ്ങൾ: ദയവായി സന്ദർശിക്കുക www.adj.com for the latest support information, contact details, and service centers.
