RYOBI P739 1 GAL. 120 PSI Portable 18V ONE+ Horizontal Air Compressor

ആമുഖം

Thank you for choosing the RYOBI P739 1 Gallon 120 PSI Portable 18V ONE+ Horizontal Air Compressor. This versatile and compact air compressor is designed for a variety of inflation tasks, from vehicle tires to recreational inflatables, and can also power small pneumatic tools. Its cordless design, powered by the RYOBI ONE+ 18V battery system, offers exceptional portability and convenience for both indoor and outdoor projects.

ചിത്രം 1: മൊത്തത്തിൽ view of the RYOBI P739 Air Compressor.

സുരക്ഷാ വിവരങ്ങൾ

Always read and understand the entire instruction manual before operating the air compressor. Failure to follow all instructions may result in electric shock, fire, and/or serious injury. Keep this manual for future reference.

• നേത്ര സംരക്ഷണം: Always wear ANSI Z87.1 compliant eye protection with side shields when operating or performing maintenance on the compressor.
• ശ്രവണ സംരക്ഷണം: Wear hearing protection during operation to prevent hearing damage.
• വെൻ്റിലേഷൻ: Operate the compressor in a well-ventilated area. Do not operate in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
• ഇലക്ട്രിക്കൽ സുരക്ഷ: പവർ സ്രോതസ്സ് വോള്യവുമായി പൊരുത്തപ്പെടുന്നുണ്ടെന്ന് ഉറപ്പാക്കുകtage requirements of the compressor. Avoid using extension cords if possible; if necessary, use only appropriate gauge and length.
• പ്രഷർ റിലീഫ്: Never exceed the maximum pressure rating of any tool or accessory. Always relieve air pressure from the tank before servicing or storing the compressor.
• ടാങ്ക് വറ്റിക്കുന്നു: Regularly drain moisture from the air tank to prevent corrosion and ensure safe operation.
• കുട്ടികളും കാഴ്ചക്കാരും: കുട്ടികളെയും കാഴ്ചക്കാരെയും ഓപ്പറേഷൻ ഏരിയയിൽ നിന്ന് അകറ്റി നിർത്തുക.

പാക്കേജ് ഉള്ളടക്കം

The RYOBI P739 Air Compressor package includes:

• RYOBI P739 1 Gallon 120 PSI Portable 18V ONE+ Horizontal Air Compressor
• ഉടമയുടെ മാനുവൽ
• Inflation Accessories (various nozzles and needles)

കുറിപ്പ്: ബാറ്ററിയും ചാർജറും വെവ്വേറെ വിൽക്കുന്നു.

സ്പെസിഫിക്കേഷനുകൾ

Figure 2: Product dimensions of the RYOBI P739 Air Compressor.

സജ്ജമാക്കുക

1. ബാറ്ററി ഇൻസ്റ്റാൾ ചെയ്യുക: Ensure your RYOBI ONE+ 18V battery is fully charged. Slide the battery into the battery port on the compressor until it clicks securely into place.


Figure 3: Inserting the 18V ONE+ battery into the compressor.

2. എയർ ഹോസ് ബന്ധിപ്പിക്കുക: The compressor features both high-pressure and low-pressure inflation/deflation ports. For high-pressure tasks like tires, connect the appropriate chuck to the high-pressure outlet. For low-pressure tasks like inflatables, attach the large diameter hose to the low-pressure port.


Figure 4: Labeled components including high-pressure and low-pressure ports.

3. പവർ ഓൺ: Press the power button on the control panel to turn on the compressor. The digital display will illuminate.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

പൊതു പ്രവർത്തനം

The control panel features a digital display, mode selection, and +/- buttons for adjusting pressure settings. The compressor has an automatic shut-off feature once the set pressure is reached.

High-Pressure Inflation (Tires)

1. ആവശ്യമുള്ള മർദ്ദം സജ്ജമാക്കുക: Use the +/- buttons on the control panel to set the target PSI (Pounds per Square Inch) for your tire. Refer to your vehicle's owner's manual or tire sidewall for recommended pressure.
2. Connect Chuck: Securely attach the high-pressure chuck to the tire valve stem. Ensure a tight seal to prevent air leakage.
3. പണപ്പെരുപ്പം ആരംഭിക്കുക: Press the START/STOP button to begin inflation. The compressor will automatically stop once the preset PSI is reached.
4. വിച്ഛേദിക്കുക: Once inflation is complete, disconnect the chuck from the valve stem.

Figure 5: Inflating a car tire using the high-pressure hose.

Low-Pressure Inflation/Deflation (Inflatables)

1. Attach Large Hose: Connect the large diameter hose to the low-pressure inflation/deflation port. Select the appropriate nozzle for your inflatable item.
2. പെരുപ്പിക്കുക/വീഴ്ത്തുക: For inflation, connect the hose to the item and press the START/STOP button. For deflation, connect the hose to the item and select the deflation mode (if available, or reverse the hose connection if applicable to the specific model).
3. നിരീക്ഷിക്കുക: Monitor the inflation/deflation process visually. This mode does not have an automatic shut-off based on pressure.

മെയിൻ്റനൻസ്

• Drain Air Tank: Regularly drain moisture from the air tank using the 1/4 turn tank drain valve located at the bottom of the tank. This prevents rust and extends the life of the compressor.
• ശുദ്ധവായു ഫിൽട്ടർ: Periodically inspect and clean the air filter to ensure optimal performance. Refer to the manual for specific cleaning instructions.
• ശരിയായി സംഭരിക്കുക: Store the compressor in a clean, dry area away from extreme temperatures. Disconnect the battery when not in use for extended periods.

ട്രബിൾഷൂട്ടിംഗ്

വാറൻ്റിയും പിന്തുണയും

For warranty information, technical support, or to order replacement parts, please refer to the warranty card included with your product or visit the official RYOBI webസൈറ്റ്. ഏതെങ്കിലും വാറന്റി ക്ലെയിമുകൾക്ക് വാങ്ങിയതിന്റെ തെളിവായി നിങ്ങളുടെ വാങ്ങൽ രസീത് സൂക്ഷിക്കുക.