മെട്രയുടെ iBeam TEDGH റാം ടെയിൽഗേറ്റ് ഹാൻഡിൽ ക്യാമറ യൂസർ മാനുവൽ

ആമുഖം

This manual provides comprehensive instructions for the installation, operation, and maintenance of your iBeam by Metra TEDGH Ram Tailgate Handle Camera. This factory replacement tailgate handle camera is designed to enhance visibility behind your vehicle, offering a clear view for safer maneuvering and parking.

ഉൽപ്പന്നം കഴിഞ്ഞുview

The iBeam TEDGH camera integrates seamlessly into your Ram truck's tailgate handle, providing a discreet and factory-like appearance. It features advanced imaging capabilities for both day and night use.

• ഉയർന്ന നിലവാരമുള്ള ഇമേജിംഗ്: Equipped with a 1/3 inch CMOS camera sensor for sharp and clear video output.
• വിശാലമായ Viewഇൻ ആംഗിൾ: 150-ഡിഗ്രി വാഗ്ദാനം ചെയ്യുന്നു viewing angle to capture a broad perspective behind the vehicle.
• രാത്രി കാഴ്ച: Features 0.5 LUX night vision for improved visibility in low-light conditions.
• Defeatable Parking Lines: Includes on-screen parking guidelines that can be enabled or disabled as per user preference.
• Extended Harness: Comes with a 26-foot harness for flexible connection to an aftermarket radio or display (not included).

ബോക്സിൽ എന്താണുള്ളത്

Upon opening the product packaging, please ensure all the following components are present:

• iBeam TEDGH Ram Tailgate Handle Camera unit
• 26-foot extension cable harness
• ഉപയോക്തൃ മാനുവൽ (ഈ പ്രമാണം)

സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

The iBeam TEDGH camera is designed for surface mount installation as a factory replacement tailgate handle. Professional installation is recommended.

സുരക്ഷാ മുൻകരുതലുകൾ

• വൈദ്യുത ഷോർട്ട് സർക്യൂട്ടുകൾ ഒഴിവാക്കാൻ, ഇൻസ്റ്റാളേഷൻ ആരംഭിക്കുന്നതിന് മുമ്പ് വാഹനത്തിന്റെ ബാറ്ററി വിച്ഛേദിക്കുക.
• Ensure all wiring is routed away from moving parts, heat sources, and sharp edges.
• എല്ലാ കണക്ഷനുകളും സുരക്ഷിതവും ശരിയായി ഇൻസുലേറ്റ് ചെയ്തതുമാണെന്ന് പരിശോധിക്കുക.
• This product is intended for use with a 12-volt DC power supply.

ഇൻസ്റ്റലേഷൻ ഘട്ടങ്ങൾ (പൊതു ഗൈഡ്)

1. Remove Existing Tailgate Handle: Carefully remove the original tailgate handle from your Ram truck. Refer to your vehicle's service manual for specific instructions.
2. Install New Tailgate Handle Camera: Mount the iBeam TEDGH camera unit into the tailgate opening, ensuring it is securely fastened.
3. റൂട്ട് വയറിംഗ്: Route the 26-foot extension cable from the camera through the tailgate and chassis to the location of your aftermarket radio or display. Ensure the cable is protected from damage.
4. ഡിസ്പ്ലേയിലേക്ക് കണക്റ്റുചെയ്യുക: Connect the video output cable from the camera harness to the video input of your aftermarket radio or monitor.
5. പവർ കണക്ഷൻ: Connect the power wires of the camera harness to a suitable 12-volt power source, typically the vehicle's reverse light circuit, so the camera activates when the vehicle is in reverse.
6. ടെസ്റ്റ് പ്രവർത്തനം: Reconnect the vehicle's battery and test the camera's operation. Engage reverse gear and verify that the camera image appears on your display.
7. സുരക്ഷിത വയറിംഗ്: Once confirmed operational, secure all wiring with zip ties or electrical tape to prevent rattling or damage.

Figure 1: The iBeam TEDGH Ram Tailgate Handle Camera, showing the integrated camera lens on the left side of the handle and the attached wiring harness on the right.

ചിത്രം 2: ഒരു അടുത്ത മുൻഭാഗം view of the iBeam TEDGH Ram Tailgate Handle Camera, highlighting the camera lens and the handle mechanism.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The iBeam TEDGH camera operates automatically when the vehicle is placed into reverse gear, provided it is correctly wired to the reverse light circuit or a switched 12V source that activates with reverse.

• യാന്ത്രിക സജീവമാക്കൽ: When you shift your vehicle into reverse, the camera will automatically display the rear view on your connected aftermarket monitor.
• പാർക്കിംഗ് ലൈനുകൾ: The camera features integrated parking lines to assist with judging distance and alignment. These lines are defeatable, meaning they can be turned on or off. The method for defeating (enabling/disabling) parking lines typically involves cutting a specific wire loop on the camera harness during installation. Consult the wiring diagram provided with the product for exact instructions.
• രാത്രി കാഴ്ച: The 0.5 LUX night vision capability allows for clear visibility even in very low light conditions, enhancing safety during nighttime parking or maneuvering.

മെയിൻ്റനൻസ്

To ensure optimal performance and longevity of your iBeam TEDGH camera, follow these simple maintenance guidelines:

• ലെൻസ് വൃത്തിയാക്കുക: ക്യാമറ ലെൻസ് പതിവായി മൃദുവായ, ഡി-ടച്ച് ഉപയോഗിച്ച് വൃത്തിയാക്കുക.amp cloth to remove dirt, dust, and debris that may obstruct the view. Avoid abrasive cleaners or materials that could scratch the lens.
• വയറിംഗ് പരിശോധിക്കുക: Periodically check the wiring and connections for any signs of wear, fraying, or corrosion. Ensure all connections remain secure.
• ഉയർന്ന മർദ്ദത്തിലുള്ള കഴുകൽ ഒഴിവാക്കുക: When washing your vehicle, avoid directing high-pressure water jets directly at the camera lens or housing, as this could potentially damage the seal or internal components.

ട്രബിൾഷൂട്ടിംഗ്

If you encounter issues with your iBeam TEDGH camera, refer to the following common troubleshooting steps:

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റി വിവരങ്ങൾ

iBeam products are manufactured by Metra Electronics Corp. For specific warranty details, including coverage period and terms, please refer to the warranty card included with your product or visit the official Metra Electronics webസൈറ്റ്. വാറന്റി ക്ലെയിമുകൾക്കായി നിങ്ങളുടെ വാങ്ങലിന്റെ തെളിവ് സൂക്ഷിക്കുക.

ഉപഭോക്തൃ പിന്തുണ

Should you require further assistance, technical support, or have questions not covered in this manual, please contact Metra Electronics Corp. customer support. Contact information can typically be found on their official webസൈറ്റ് അല്ലെങ്കിൽ ഉൽപ്പന്ന പാക്കേജിംഗിൽ.

Manufacturer: Metra Electronics Corp