STEALTH SAQ-1301 എയർ കംപ്രസർ ഉപയോക്തൃ മാനുവൽ

1 പ്രധാനപ്പെട്ട സുരക്ഷാ വിവരങ്ങൾ

Always read and understand all safety warnings and instructions before operating the air compressor. Failure to follow these warnings may result in serious injury or property damage.

• ഇലക്ട്രിക്കൽ സുരക്ഷ: Ensure the compressor is connected to a properly grounded 120 Volt, 750 Watt (1 Horsepower) power supply. Do not operate in wet conditions.
• മർദ്ദ സുരക്ഷ: The maximum operating pressure is 125 PSI. Do not exceed the rated pressure of any tool or accessory. The unit features a safety valve that automatically opens if pressure reaches excessive levels.
• ശ്രവണ സംരക്ഷണം: Although designed for quiet operation (65 dB), prolonged exposure to noise can cause hearing damage. Always wear appropriate hearing protection.
• നേത്ര സംരക്ഷണം: Always wear ANSI Z87.1 approved safety glasses with side shields when operating the compressor or using air tools.
• ചലിക്കുന്ന ഭാഗങ്ങൾ: ചലിക്കുന്ന ഭാഗങ്ങളിൽ നിന്ന് കൈകൾ, മുടി, അയഞ്ഞ വസ്ത്രങ്ങൾ എന്നിവ സൂക്ഷിക്കുക.
• അമിത ചൂടാക്കൽ സംരക്ഷണം: The compressor is equipped with automatic overheat protection. If the motor overheats, it will shut down automatically. Allow it to cool before restarting.

2. ഉൽപ്പന്നം കഴിഞ്ഞുview

The STEALTH SAQ-1301 is a 3-gallon, 1.0 HP, oil-free, and ultra-quiet air compressor designed for a variety of applications. Its compact and portable design makes it suitable for both indoor and outdoor use.

ചിത്രം 2.1: മുൻഭാഗം view of the STEALTH SAQ-1301 3 Gallon Air Compressor.

പ്രധാന സവിശേഷതകൾ:

• വാണിജ്യ-ഗ്രേഡ് പ്രകടനം: Provides continuous and stable high-voltage output up to 150 PSI.
• Leading Silent Technology: Operating noise as low as 65 decibels, suitable for indoor and outdoor use.
• Easy Cold Start: Requires low amps for easier startup in cold weather.
• പോർട്ടബിൾ ഡിസൈൻ: Lightweight aluminum alloy body with rubber reinforced handle and bases.
• Convenient Operation Panel: Integrated LED display and intuitive control buttons for monitoring air pressure and adjusting settings.

Figure 2.2: The SAQ-1301 compressor highlighting its 3-gallon tank, 1.0 HP motor, 150 PSI max pressure, 2.5 CFM, portability, oil-free design, cold-weather start, and long-life cycle.

Figure 2.3: The compressor is suitable for a wide range of applications including roofing nailers, finishing nailers, brad nailers, flooring nailers, and general inflation tasks.

ഘടകം തിരിച്ചറിയൽ:

• ടാങ്ക് പ്രഷർ ഗേജ്: എയർ ടാങ്കിനുള്ളിലെ മർദ്ദം പ്രദർശിപ്പിക്കുന്നു.
• റെഗുലേറ്റർ നോബ്: Adjusts the output air pressure to the tool.
• Line Out / Tool Pressure Gauge: Displays the regulated air pressure supplied to the tool.
• ക്വിക്ക് കണക്ട് കപ്ലർ: For easy hose connection.
• വാൽവ് കളയുക: Located at the bottom of the tank, used to remove moisture.
• സുരക്ഷാ വാൽവ്: Releases excess pressure to prevent over-pressurization.
• റബ്ബർ അടി: Reduce vibration and enhance stability during operation.

Figure 2.4: The Air Pressure Regulator allows adjustment of the pressure inside the line to the tool being used.

Figure 2.5: The Safety Valve automatically opens to prevent excessive pressure build-up if pressure reaches the preset level.

Figure 2.6: Sturdy rubber feet are designed to reduce vibration and enhance the stability of the compressor during operation.

3. സജ്ജീകരണവും പ്രാരംഭ ഉപയോഗവും

അൺപാക്ക് ചെയ്യുന്നു:

Carefully remove the compressor from its packaging. Inspect for any shipping damage. Ensure all components listed in the manual are present.

പ്ലേസ്മെൻ്റ്:

Place the compressor on a firm, level surface. The rubber feet will help reduce vibration. Ensure adequate ventilation around the unit.

ഇലക്ട്രിക്കൽ കണക്ഷൻ:

Connect the power cord to a grounded 120V AC outlet. The compressor is designed for low-amp startup, making it easier to use in various conditions.

പ്രാരംഭ ബ്രേക്ക്-ഇൻ നടപടിക്രമം:

1. With the drain valve fully open, turn on the compressor.
2. Allow the compressor to run for 30 minutes with no pressure building in the tank. This helps to properly seat the motor components.
3. After 30 minutes, turn off the compressor and close the drain valve. The unit is now ready for use.

4. ഓപ്പറേഷൻ

എയർ ടൂളുകൾ ബന്ധിപ്പിക്കുന്നു:

1. Ensure the compressor is off and unplugged before connecting or disconnecting air tools.
2. Attach your air hose to the quick connect coupler on the compressor's control panel.
3. Connect your air tool to the other end of the hose.

Figure 4.1: The compressor easily connects to various pneumatic tools, such as a finishing nailer, for efficient operation.

വായു മർദ്ദം ക്രമീകരിക്കൽ:

1. Plug in the compressor and turn it on. Allow the tank to fill to its maximum pressure (150 PSI).
2. Turn the regulator knob (blue knob) to adjust the output pressure displayed on the 'TOOL' gauge. Set the pressure according to the requirements of your air tool.
3. The compressor will automatically cycle on and off to maintain tank pressure between 120 PSI (cut-in) and 150 PSI (cut-out).

അപേക്ഷകൾ:

The SAQ-1301 is versatile and can be used for:

• Air Brushing
• Drilling (with appropriate pneumatic drill)
• Nailing (brad, finish, roofing, flooring nailers)
• Sanding (with appropriate pneumatic sander)
• Spraying (paint sprayers)
• ടയർ വിലക്കയറ്റം

Figure 4.2: The compressor is shown in a woodworking application, demonstrating its utility for tasks like trim installation.

Figure 4.3: The portable design and sufficient pressure make it ideal for tire inflation for vehicles and other inflatables.

5. പരിപാലനം

Regular maintenance ensures the longevity and optimal performance of your STEALTH air compressor.

Drain the Air Tank:

Moisture will accumulate in the air tank. To prevent corrosion and ensure proper operation, drain the tank daily or after each use.

1. Turn off the compressor and unplug it from the power source.
2. Place a suitable container under the drain valve located at the bottom of the tank.
3. Slowly open the drain valve to release air and moisture.
4. എല്ലാ വായുവും ഈർപ്പവും പുറന്തള്ളപ്പെട്ടുകഴിഞ്ഞാൽ, ഡ്രെയിൻ വാൽവ് സുരക്ഷിതമായി അടയ്ക്കുക.

Figure 5.1: The drain valve is used to remove moisture from the air tank after the compressor is shut off, preventing rust and maintaining air quality.

എണ്ണ രഹിത പമ്പ്:

This compressor features an oil-free pump, eliminating the need for oil changes and reducing overall maintenance requirements.

പൊതുവായ ശുചീകരണം:

Keep the compressor clean and free of dust and debris. Use a dry cloth to wipe down the exterior. Do not use harsh chemicals or abrasive cleaners.

6. പ്രശ്‌നപരിഹാരം

നിങ്ങളുടെ എയർ കംപ്രസ്സറിൽ നിങ്ങൾ നേരിട്ടേക്കാവുന്ന സാധാരണ പ്രശ്നങ്ങളെ ഈ വിഭാഗം അഭിസംബോധന ചെയ്യുന്നു.

ഈ പരിഹാരങ്ങൾ പരീക്ഷിച്ചതിന് ശേഷവും പ്രശ്നങ്ങൾ നിലനിൽക്കുകയാണെങ്കിൽ, ഉപഭോക്തൃ പിന്തുണയുമായി ബന്ധപ്പെടുക.

7 സ്പെസിഫിക്കേഷനുകൾ

8. വാറൻ്റിയും പിന്തുണയും

വാറൻ്റി വിവരങ്ങൾ:

The STEALTH SAQ-1301 Air Compressor comes with a Limited Lifetime Warranty. Please refer to the warranty documentation included with your product for full details and restrictions.

ഉപഭോക്തൃ പിന്തുണ:

For technical assistance, parts, or warranty claims, please contact STEALTH customer support. Keep your model number (SAQ-1301) and proof of purchase readily available when contacting support.

You can also visit the official Stealth Store for more information and product resources: Stealth Store on Amazon