STEALTH SAA-110T 10-Gallon High-Pressure Air Tank

1. ആമുഖം

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your STEALTH SAA-110T 10-Gallon High-Pressure Air Tank. Please read this manual thoroughly before initial use and retain it for future reference.

The STEALTH SAA-110T is an auxiliary air tank designed for portability and ease of use. It holds up to 10 gallons of portable air at a maximum pressure of 225 PSI, suitable for various pneumatic tools. It features multiple quick couplers for enhanced work efficiency.

ചിത്രം 1: മുൻഭാഗം view of the STEALTH SAA-110T 10-Gallon High-Pressure Air Tank.

2 സുരക്ഷാ വിവരങ്ങൾ

മുന്നറിയിപ്പ്: ഈ സുരക്ഷാ നിർദ്ദേശങ്ങൾ പാലിക്കുന്നതിൽ പരാജയപ്പെടുന്നത് ഗുരുതരമായ പരിക്കോ സ്വത്ത് നാശമോ ഉണ്ടാക്കിയേക്കാം.

• Always wear appropriate personal protective equipment, including eye protection, when operating or maintaining the air tank.
• Do not exceed the maximum operating pressure of 225 PSI. Over-pressurizing the tank can cause it to rupture.
• Never move the air tank while it is pressurized. Depressurize the tank before transport.
• Before each use, inspect the tank for any signs of damage, corrosion, or leaks. Do not use a damaged tank.
• Ensure all connections are secure and leak-free before pressurizing the tank.
• Do not modify the air tank or its components. Use only genuine replacement parts.
• Keep children and unauthorized personnel away from the air tank during operation.
• Always drain moisture from the tank after each use to prevent corrosion and extend service life.
• This product is an air tank, not an air compressor. It requires an external air compressor for filling.

Figure 2: The SAA-110T Air Tank in a typical use environment. Note: This is an air tank, not an air compressor.

3. ഉൽപ്പന്ന ഘടകങ്ങൾ

Familiarize yourself with the various parts of your STEALTH SAA-110T Air Tank:

Figure 3: Labeled diagram of the SAA-110T Air Tank components.

1. Quick Coupler (1, 6, 7, 10): Connection points for air hoses and pneumatic tools. The SAA-110T includes 5 quick couplers.
2. Air Cock (2): Valve to control air flow to the quick couplers.
3. Safety Valve (3): Automatically releases pressure if it exceeds a safe limit. Do not tamper with this valve.
4. Tank Gauge (4): Displays the internal pressure of the air tank.
5. Handle Grip (5): Ergonomic, rubber-reinforced handle for comfortable transport.
6. Tool Gauge (8): Displays the regulated output pressure for connected tools.
7. Pressure Regulator (9): Adjusts the output air pressure to suit specific tool requirements.
8. Tank (11): The main pressure vessel, constructed from Q235B Steel.
9. Rubber Pad (12): Non-slip pads on the base for increased stability.
10. Drain Valve (13): Located at the bottom of the tank to release condensed moisture.

4. സജ്ജീകരണം

1. അൺപാക്ക് ചെയ്യുന്നു: Carefully remove the air tank from its packaging. Inspect for any shipping damage.
2. പ്രാഥമിക പരിശോധന: Before first use, visually inspect all components, connections, and gauges for any signs of damage or loose parts. Ensure the drain valve is closed.
3. പ്ലേസ്മെൻ്റ്: Place the air tank on a stable, level surface. The rubber pads on the base provide stability.
4. Connecting to an Air Compressor: Connect your air compressor's output hose to one of the quick couplers on the STEALTH SAA-110T. Ensure the connection is secure.
5. ടാങ്ക് നിറയ്ക്കൽ: Turn on your air compressor and allow it to fill the SAA-110T tank. Monitor the Tank Gauge (4) to ensure the pressure does not exceed 225 PSI. Once the desired pressure is reached, turn off the compressor and disconnect the hose.

5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

1. Connecting Tools: Attach your pneumatic tool's air hose to one of the available quick couplers (1, 6, 7, 10). Ensure the connection is firm.
2. Adjusting Output Pressure: Use the Pressure Regulator (9) to adjust the air pressure delivered to your tools. Turn the knob clockwise to increase pressure and counter-clockwise to decrease it. Monitor the Tool Gauge (8) for the output pressure reading.
3. Using Multiple Tools: The SAA-110T is equipped with 5 quick couplers, allowing multiple tools to be connected simultaneously. Adjust the pressure regulator as needed for the specific tool in use.
4. വിഷാദം കുറയ്ക്കൽ: When finished, disconnect tools. To fully depressurize the tank, open the Air Cock (2) or slowly open the drain valve (13) until all air has escaped.

Figure 4: The SAA-110T Air Tank in use with a pneumatic tool in a construction environment.

6. പരിപാലനം

Regular maintenance ensures the longevity and safe operation of your air tank.

• ഈർപ്പം കളയുക: After each use, or at least daily, open the Drain Valve (13) at the bottom of the tank to release any accumulated moisture. This prevents internal corrosion.
• ചോർച്ചകൾ പരിശോധിക്കുക: Periodically check all connections, hoses, and the tank body for air leaks. A soapy water solution can be applied to connections to identify bubbles indicating a leak. Tighten connections or replace seals as necessary.
• വൃത്തിയുള്ള പുറം: Keep the exterior of the tank clean and free from dirt and debris.
• സംഭരണം: Store the air tank in a clean, dry environment. Ensure it is fully depressurized before storing for extended periods.

7. പ്രശ്‌നപരിഹാരം

8 സ്പെസിഫിക്കേഷനുകൾ

Figure 5: Dimensions and key specifications of the SAA-110T Air Tank.

• മോഡൽ: SAA-110T
• ടാങ്ക് കപ്പാസിറ്റി: 10 ഗാലൻ
• പരമാവധി പ്രവർത്തന സമ്മർദ്ദം: 225 പി.എസ്.ഐ
• ടാങ്ക് മെറ്റീരിയൽ: Q235B Steel
• Number of Quick Couplers: 5
• ഇനത്തിൻ്റെ ഭാരം: 41.2 പൗണ്ട്
• ഉൽപ്പന്ന അളവുകൾ (L x W x H): 20" x 13" x 18"
• നിറം: നീല
• ശബ്ദ നില: 65 Decibels (when filling from a compressor, tank itself is passive)
• ശുപാർശ ചെയ്യുന്ന ഉപയോഗങ്ങൾ: Inflation, powering pneumatic tools

9. വാറൻ്റിയും പിന്തുണയും

The STEALTH SAA-110T Air Tank comes with a പരിമിതമായ ആജീവനാന്ത വാറൻ്റി. For warranty claims, technical support, or customer service inquiries, please refer to the contact information provided with your purchase documentation or visit the official Stealth webസൈറ്റ്.

വാറന്റി സാധൂകരണത്തിനായി നിങ്ങളുടെ വാങ്ങിയതിന്റെ തെളിവ് സൂക്ഷിക്കുക.