ആമുഖം
The MXR M282 Mini Dyna Comp Bass Compressor is designed to provide the iconic Dyna Comp compression sound, specifically tuned for bass players. It features a classic CA3080 integrated circuit for quiet operation, transparency, and increased dynamic range. This pedal includes controls to shape the compression effect while preserving low-end integrity and tonal dynamics.
ചിത്രം 1: മുൻഭാഗം view of the MXR M282 Mini Dyna Comp Bass Compressor, showing the control knobs and footswitch.
സജ്ജമാക്കുക
പവർ കണക്ഷൻ
The M282 Mini Dyna Comp Bass Compressor requires a 9-volt DC power adapter (Dunlop ECB003 9-volt adapter is typically included). Connect the adapter to the 9V input jack located on the rear side of the pedal. This pedal does not support battery operation.
ചിത്രം 2: പിൻഭാഗം view of the pedal, highlighting the 9V power input jack.
ഓഡിയോ കണക്ഷനുകൾ
Connect your bass guitar to the INPUT jack on the right side of the pedal using a standard 1/4-inch instrument cable. Connect the OUTPUT jack on the left side of the pedal to your amplifier or the next pedal in your signal chain using another 1/4-inch instrument cable.
ചിത്രം 3: വശം view showing the INPUT jack.
ചിത്രം 4: വശം view showing the OUTPUT jack.
പ്രവർത്തന നിർദ്ദേശങ്ങൾ
നിയന്ത്രിക്കുന്നുview
The MXR M282 Mini Dyna Comp Bass Compressor features four control knobs and one switch to precisely shape your bass tone and compression characteristics.
ചിത്രം 5: വിശദമായി view of the pedal's control layout.
CLEAN Knob
This control allows you to blend your unaffected, clean bass signal with the compressed signal. Turning it clockwise increases the amount of clean signal, helping to maintain low-end integrity and clarity, especially useful for preserving the fundamental tone of your bass.
SENSITIVITY Knob
The Sensitivity knob adjusts the threshold at which the compression engages and the amount of sustain. Turning it clockwise increases the compression effect and the length of sustain. Higher settings will result in more noticeable compression.
ഔട്ട്പുട്ട് നോബ്
This knob controls the overall output volume of the pedal. Adjust it to match the volume of your bypassed signal or to provide a boost when the effect is engaged.
ടോൺ നോബ്
The Tone control adjusts the upper midrange frequencies of the compressed signal. This allows you to fine-tune the tonal dynamics and presence of your bass, ensuring your sound cuts through the mix without becoming muddy or harsh.
അറ്റാക്ക് സ്വിച്ച്
This mini-toggle switch allows you to select between two attack times:
- Slow (Vintage Style): Provides a slower attack time, characteristic of classic compression, allowing the initial transient of your note to pass through before compression engages.
- Fast (Modern Style): Offers a faster attack time, instantly adding punch and clarity by compressing the initial transient more quickly.
ഫുട്വിച്ച്
The footswitch engages or bypasses the effect. Press it once to turn the effect on, and press it again to turn it off. The LED indicator will illuminate when the effect is active.
മെയിൻ്റനൻസ്
- വൃത്തിയാക്കൽ: Use a soft, dry cloth to clean the pedal's exterior. Avoid using abrasive cleaners or solvents, as they may damage the finish or internal components.
- വൈദ്യുതി വിതരണം: Always use a compatible 9V DC power adapter. Disconnect the power supply when the pedal is not in use for extended periods to prevent unnecessary wear.
- സംഭരണം: Store the pedal in a cool, dry place away from direct sunlight and extreme temperatures. If transporting, use a padded case to protect it from physical damage.
- കണക്ഷനുകൾ: Periodically check all cable connections for tightness and ensure cables are not frayed or damaged.
ട്രബിൾഷൂട്ടിംഗ്
| ഇഷ്യൂ | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| Loud "pop" sound when engaging/disengaging the effect. | This can sometimes occur with true bypass pedals due to DC voltage present on the audio line. | While often inherent to the design, ensure all cables are securely connected. If using other pedals, try isolating the Dyna Comp to see if the issue persists. Some users find that placing a buffer pedal before or after can mitigate this. |
| No sound or power to the pedal. | Incorrect power supply, faulty cable, or pedal not receiving power. | Verify the 9V DC power adapter is correctly connected and functioning. Check all instrument cables for damage. Ensure the power outlet is active. |
| Compression effect is too strong or too subtle. | Incorrect Sensitivity or Output knob settings. | Adjust the SENSITIVITY knob to increase or decrease the compression level. Use the OUTPUT knob to set the desired volume. Experiment with the CLEAN knob to blend in more or less of your dry signal. |
സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| മോഡൽ നമ്പർ | M282 |
| ഇനത്തിൻ്റെ ഭാരം | 4.6 ഔൺസ് (0.13 കിലോഗ്രാം) |
| ഉൽപ്പന്ന അളവുകൾ | 3.63 x 1.5 x 2.25 ഇഞ്ച് |
| നിറം | വെള്ള |
| ഹാർഡ്വെയർ ഇന്റർഫേസ് | 1/4-ഇഞ്ച് ഓഡിയോ |
| സിഗ്നൽ ഫോർമാറ്റ് | അനലോഗ് |
| പവർ ഉറവിടം | Adapter (9 Volts DC) |
| ആദ്യം ലഭ്യമായ തീയതി | ഫെബ്രുവരി 1, 2019 |
വാറൻ്റിയും പിന്തുണയും
For information regarding the manufacturer's warranty, please refer to the documentation included with your product or visit the official MXR website. For technical support, product registration, or service inquiries, please contact MXR customer service through their official channels. Keep your proof of purchase for warranty claims.
Note: Third-party protection plans offered by retailers are separate from the manufacturer's warranty.
