ആമുഖം
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Emerson 1E78-140 Non-Programmable Heat Only Thermostat. Please read this manual thoroughly before installation and use to ensure proper function and safety.
The Emerson 1E78-140 is designed for use with most single-stage heat-only systems, including 24-volt and millivolt systems. It is not compatible with electric baseboard heat or certain other systems.
സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
ആവശ്യമായ ഉപകരണങ്ങൾ
- സ്ക്രൂഡ്രൈവർ
- ഡ്രിൽ ചെയ്യുക (പുതിയ മൗണ്ടിംഗ് ദ്വാരങ്ങൾ ആവശ്യമുണ്ടെങ്കിൽ)
- വയർ സ്ട്രിപ്പറുകൾ (ആവശ്യമെങ്കിൽ)
നിങ്ങളുടെ പഴയ തെർമോസ്റ്റാറ്റ് നീക്കംചെയ്യുന്നു
- Turn off power to your heating system at the main fuse or circuit breaker panel.
- നിങ്ങളുടെ പഴയ തെർമോസ്റ്റാറ്റിന്റെ കവർ നീക്കം ചെയ്യുക.
- Take a photo of the existing wiring connections for reference.
- Disconnect the wires from the old thermostat terminals, noting which wire was connected to each terminal.
- Remove the old thermostat base from the wall.
പുതിയ തെർമോസ്റ്റാറ്റ് മൌണ്ട് ചെയ്യുന്നു
- മുൻ കവർ തെർമോസ്റ്റാറ്റ് ബേസിൽ നിന്ന് വേർതിരിക്കുക.
- Position the new thermostat base on the wall. Use the provided screws and anchors to secure it.
വയറിംഗ്
പ്രധാനപ്പെട്ടത്: Ensure power is off before wiring. This thermostat is for 2-wire heat-only systems. Connect wires only to R and W terminals.
Refer to the wiring diagram below. Identify each wire attached to the old thermostat by taking a photo of old wiring.

Image: Wiring diagram for the Emerson 1E78-140 thermostat. It illustrates connections for 2-wire heat-only systems to R and W terminals. The image also shows two AAA Energizer batteries and various mounting screws and anchors included with the thermostat. A caution notice regarding battery life and freeze hazard is visible.
- Connect the wire from your heating system's R terminal to the R terminal on the thermostat.
- Connect the wire from your heating system's W terminal to the W terminal on the thermostat.
ബാറ്ററി ഇൻസ്റ്റാളേഷൻ
The thermostat requires two AAA batteries for operation. Install the batteries into the compartment located on the back of the thermostat, observing the correct polarity (+/-).

ചിത്രം: മുൻഭാഗം view of the Emerson 1E78-140 thermostat. The digital display shows "70" as the current temperature. To the right of the display are two gray buttons for adjusting the temperature up and down. Below the Emerson logo, a system switch is visible, set to "OFF HEAT".
After wiring and battery installation, attach the thermostat front cover to the base.
Turn on power to your heating system at the main fuse or circuit breaker panel.
പ്രവർത്തന നിർദ്ദേശങ്ങൾ
സിസ്റ്റം സ്വിച്ച്
The system switch is located on the front of the thermostat. It has two positions:
- ഓഫാണ്: Turns the heating system off.
- ചൂട്: സെറ്റ് താപനില നിലനിർത്താൻ തപീകരണ സംവിധാനം സജീവമാക്കുന്നു.
താപനില ക്രമീകരണം
Use the Up (▲) and Down (▼) buttons located next to the digital display to adjust your desired temperature setting. The thermostat will maintain this temperature with a precision of plus/minus 1 degree Fahrenheit.
ബാക്ക്ലൈറ്റ്
The digital display features a backlight for improved visibility, especially in low-light conditions. The backlight activates when buttons are pressed.
മെയിൻ്റനൻസ്
ബാറ്ററി മാറ്റിസ്ഥാപിക്കൽ
When the "Change Battery" indicator (a battery icon) is displayed on the screen, the batteries have limited remaining life and should be replaced soon. The system will not operate with dead batteries.
- തെർമോസ്റ്റാറ്റ് കവർ നീക്കം ചെയ്യുക.
- പഴയ AAA ബാറ്ററികൾ നീക്കം ചെയ്യുക.
- ശരിയായ പോളാരിറ്റി ഉറപ്പാക്കിക്കൊണ്ട് രണ്ട് പുതിയ AAA ആൽക്കലൈൻ ബാറ്ററികൾ ഇടുക.
- തെർമോസ്റ്റാറ്റ് കവർ മാറ്റിസ്ഥാപിക്കുക.
വൃത്തിയാക്കൽ
ഒരു സോഫ്റ്റ്, ഡി ഉപയോഗിച്ച് തെർമോസ്റ്റാറ്റ് വൃത്തിയാക്കുകamp തുണി. ഉരച്ചിലുകളുള്ള ക്ലീനറുകളോ ലായകങ്ങളോ ഉപയോഗിക്കരുത്.
ട്രബിൾഷൂട്ടിംഗ്
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| ഡിസ്പ്ലേ ശൂന്യമോ മങ്ങിയതോ ആണ്. | ഡെഡ് അല്ലെങ്കിൽ കുറഞ്ഞ ബാറ്ററികൾ. | രണ്ട് AAA ബാറ്ററികൾ മാറ്റിസ്ഥാപിക്കുക. |
| ചൂടാക്കൽ സംവിധാനം ഓണാക്കുന്നില്ല. |
|
|
| "Change Battery" icon displayed. | കുറഞ്ഞ ബാറ്ററി പവർ. | Replace the two AAA batteries promptly. |
സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| ബ്രാൻഡ് | എമേഴ്സൺ |
| മോഡൽ നമ്പർ | 1E78-140 |
| കൺട്രോളർ തരം | പുഷ് ബട്ടൺ |
| പ്രത്യേക ഫീച്ചർ | താപനില ഡിസ്പ്ലേ |
| താപനില നിയന്ത്രണ തരം | മാനുവൽ |
| ഉൾപ്പെടുത്തിയ ഘടകങ്ങൾ | Thermostat, Temperature Sensor |
| പവർ ഉറവിടം | Electric (2 AAA batteries for display/control) |
| വാല്യംtage | 24 Volts (for system operation) |
| ഡിസ്പ്ലേ തരം | എൽഇഡി |
| നിയന്ത്രണ രീതി | (ബട്ടണുകൾ) സ്പർശിക്കുക |
| മൗണ്ടിംഗ് തരം | മതിൽ മൗണ്ട് |
| ശൈലി | ഡിജിറ്റൽ |
| ബാക്ക്ലൈറ്റ് | അതെ |
| അനുയോജ്യത | ഏറ്റവും ഒറ്റ-കൾtage heat-only systems (24V and millivolt). Not compatible with electric baseboard heat. |
| കൃത്യത | +/- 1 degree F |

ചിത്രം: ഒരു വശം view of the Emerson 1E78-140 thermostat, held in a hand for scale. The image indicates the thermostat's height is 5.5 inches (14 cm).
വാറൻ്റി വിവരങ്ങൾ
Specific warranty details for the Emerson 1E78-140 thermostat are typically provided with the product packaging or can be obtained directly from the manufacturer, Emerson. Please refer to the documentation included in your product box or visit the official Emerson webഏറ്റവും പുതിയ വാറന്റി നിബന്ധനകൾക്കും വ്യവസ്ഥകൾക്കുമുള്ള സൈറ്റ്.
ഉപഭോക്തൃ പിന്തുണ
For technical assistance, troubleshooting beyond this manual, or inquiries regarding your Emerson 1E78-140 thermostat, please contact Emerson customer support. Contact information can usually be found on the product packaging or on the official Emerson webസൈറ്റ്.





